英语释义

• gear wheels that mesh in the same plane

片语

differential spur drive gear差速器传动正齿轮

spur bevel gear正齿伞齿轮

spur wheel gear正齿轮

spur-gear differential直齿圆柱齿轮差速器

spur-gear set正齿轮组

Roller spur cylinder gear滚切外齿轮

Involute spur cylindrical gear渐开线直齿圆柱齿轮

roller spur bevel gear滚齿直齿圆锥齿轮

英汉例句

• in this paper, the fuzzy reliablity optimal design method of spur gear transmission is presented by the combination of fuzzy reliablity theory with optimization technique.

  结合模糊可靠性设计理论和优化设计技术，提出了直齿圆柱齿轮传动的模糊可靠性优化设计方法。

• the method and procedure of measuring and calculating involute spur gear geometrical parameters such as tip diameter, module, modification coefficient and pressure angle were shown in this paper.

  本文阐述了渐开线直齿圆柱齿轮顶圆直径及齿轮模数、变位系数和压力角等参数的确定方法和步骤。

• the experimental results show that it is feasible to machining the spur gear with superplastic extrusion process.

  试验结果表明，用超塑挤压的方法加工圆柱直齿轮是可行的。

• a three freedom degrees mathematical model of a pair of involute spur gear transmission system is built using the lumped mass method, based on gear meshing theory and vibration impact theory.

  本文基于齿轮啮合原理及振动沖击理论，采用集中质量法建立了由一对渐开线直齿圆柱齿轮组成的传动系统三自由度数学模型。

• in this paper, the influence of the immersion depth on the churning loss of a practical spur gear used in the high speed train is studied by using experiential equations at different train speeds.

  本文针对中国南车集团开发的高速列车传动齿轮箱，采用经验公式，计算分析了在不同转速下，齿轮箱浸油深度对搅油损失的影响。

• taking the spur gear as study object, this article introduces the method of establishing the parametric model in catia and transmitting it into ansys by graphic data transformation interface.

  以直齿圆柱齿轮为研究对象，重点介绍了如何利用catia对其进行参数化建模及通过图形数据转换接口导入到ansys中建立有限元模型。

• the existing questions of mould wear and the protruding head of spur gear during the warm extrusion are discussed and the reason and aftereffect are analyzed.

  论述了温挤压成形时存在模具磨损与挤出齿轮件头部凸的问题，分析了其产生的原因与造成的后果。

• casting ladle hand-wheels through chain hoist brakes and column spur gear transmission, to flip ladle (also called straight teeth casting ladle).

  浇包手轮通过手拉葫芦式制动器，圆柱直齿轮传动，来翻转铁水包（也称直齿浇包）。

• this paper considers the design of minimum volume of helical spur gear as a problem of fuzzy optimum with two objectives.

  本文把斜齿圆柱齿轮传动的最大体积设计，提成为一个双目标模糊优化问题；

• the cold forging of the spur gear is a complicated three-dimensional forming, and its process and precision are influenced by many factors.

  直齿轮的冷锻成形，属于复杂的三维变形，多种因素影响齿轮的成形和精度。

• according to the relative position of sub-gear axis parallel shaft spur gear drive, bevel gear drive shaft and intersecting cross-axis helical gears.

  按齿轮轴线的相对位置分平行轴圆柱齿轮传动、相交轴圆锥齿轮传动和交错轴螺旋齿轮传动。

• experiments with 6105qa diesel engine spur gear cover have shown that the method is effective.

  对6105qa柴油机正时齿轮罩盖的实验表明了其正确性。

• the cavity dimension calculation of injection mold of plastic small-module precision cylindrical spur gear and its molding technology are introduced.

  介绍了精密塑料小模数直齿圆柱齿轮模具型腔尺寸计算方法及成型工艺。

• the measuring method of ehl oil film in involute spur gear is presented in this paper.

  本文叙述了渐开线直齿圆柱齿轮ehl（弹性流体动力润滑）油膜厚度的测量法；

• the spur gear forming with warm extrusion is simulated under different die structures, which can pick out the best one.

  对圆柱直齿轮在不同凹模结构下的温挤压成形进行数值模拟，可以方便地对凹模结构进行改良。

• laws of the deformation force during radial extrusion of spur gear are simulated by using ubet.

  利用上限元法（ubet）模拟了圆柱直齿轮径向挤压过程的变形力规律。

• spur gear (sga) or compound bevel gear (bga) attachments can be provided in any position shown in figure 1.

  如果采用正齿轮（sga）或复合伞齿轮（bga）附件，则可以在图1中显示的各个位置安装手轮。

• in this paper, the fuzzy reliable optimum design's mathematical model of the spur gear under the action of the sliding friction is set up by using the fuzzy and reliable theory.

  通过应用模糊设计理论和可靠性设计理论，建立了摩擦力作用下直齿圆柱齿轮传动的模糊可靠性优化设计的数学模型，并对其进行优化处理。

• with the multi-grid method, the influences of surface roughness on the non-newtonian thermal elastohydrodynamic lubrication of involute spur gear were investigated.

  利用多重网格技术，研究了表面粗糙度对渐开线直齿圆柱齿轮非牛顿热弹流润滑的影响。

• this paper studies the contact lines of tooth surface of the transmission of two-sides level gear and spur gear and analyses the property of engagement.

  计算和研究了双联锥形齿轮和圆柱齿轮啮合时的齿面接触线，并分析了啮合时的特点和性能。