片语

Steel l Casting iron碳素钢铸件

steel continuous casting plant连续铸钢设备

steel-casting shop铸钢车间

stainless steel propeller casting不锈钢螺旋桨铸造

Bearing steel continuous casting轴承钢连铸

stainless steel continuous casting不锈钢连铸

Steel-Casting Foundry铸钢厂

Stainless steel precision casting不锈钢精密铸造

英汉例句

• the shrinkage and porosity of the weir pump steel casting have been studied by cad/cae then an optimizing foundry technology proposed.

  用cad/cae方法研究分析了威尔泵铸钢件的缩孔、缩松质量问题，并提出了优化工艺。

• in the paper, the shrinkage and porosity of the weir pump steel casting was studied by cad/cae, then a optimizing foundry technology was proposed.

  用cad/cae方法研究分析了威尔泵铸钢件的缩孔、缩松质量问题，并提出了优化工艺。

• the development and application situation of steel casting such as cylinder of turbine are illustrated.

  综述了汽轮机汽缸等铸钢件的发展和使用情况。

• octahedral steel casting joints are used in the large-span structure of national stadium in beijing to transfer the inner columns from the diamond section into the rectangular section.

  在国家体育场大跨度钢结构设计中，为了实现内柱从菱形截面到矩形截面的转换，在内柱底部设置了多面体铸钢节点。

• the incidence of silicosis was compared in the workers exposed to either silica dust or limestone dust in a steel casting factory.

  调查某铸钢分厂在采用型砂材料石英砂或石灰石砂工人硅肺患病情况。

• the steel casting lifting point of single point mooring (spm) is an important pivot of the spm to connect floating production storage system.

  单点系泊的铸钢吊点是单点系泊系统联接浮式生产储油系统的重要枢扭。

• this paper compares cp resin and furan resin in room properties and high temperature properties, it also discusses the advantage of cp resin in the usage or steel casting production.

  cp树脂砂的常温性能和高温性能等多方面与呋喃树脂砂进行比较，探讨cp树脂砂用于铸钢件生产上的优势；

• the goal of control molten steel casting temperature is to give play to the functions of the hot ladle turn round operation.

  钢液浇铸温度的控制主要是发挥红包运转的作用。

• can be used for thermal insulation, sound insulation, heat preservation, boiler, chemical plants, steel casting aluminum plant, etc and general electric insulation.

  可用于绝热，保温隔音，锅炉，钢铁厂，化工厂，铸铝厂等以及一般电器绝缘。

• the causes and solutions of sand hole in steel casting with air impact molding were investigated.

  对气沖造型湿砂型生产铸钢件产生砂眼缺陷的原因及如何消除进行了研究。

• some problems and solution methods of 304, 316 stainless steel casting during the process of acid pickling and passivation were introduced.

  介绍304和316等型号不锈钢铸件在表面酸洗和钝化过程中，所碰到的一些问题及解决的方法。

• a flexible software with versatile functions was presented, which can be used conveniently in the design of the steel casting process.

  开发了具有功能全面、使用方便、适用面广等特点的铸钢件铸造工艺计算机辅助设计软件。

• a high level of steel casting production capacity.

  高水平的铸钢件生产能力。

• the foundry technology of blast furnace steel casting cooling wall has been introduced with emphasis on fabricating of pattern plate, use of inner chilling and making experiences of core of bolt hole.

  介绍高炉铸钢冷却壁的铸造工艺，特别是模板的制作、内冷铁的使用以及螺栓孔芯子的制作经验。

• our technical staff of high pressure boiler tube steel casting properties that mainly by casting metal liquidity, shrinkage characteristics, segregation orientation to comprehensive evaluation.

  我们高压锅炉管的技术人员说钢的铸造性能主要由铸造时金属的流动性、收缩特点、偏析倾向等来综合评定。

• pilot and pre industrial strip plants and r&d experience will be described for both carbon and stainless steel casting with an emphasis on current product quality results.

  以所达到的产品质量结果为重点，描述了碳钢和不锈钢中间试验厂和预工业试验厂以及研究开发工作的经验。

• large diameter sleeve of steel casting by horizontal centrifugal casting machine has been introduced with discussion of technological measures of reducing pinhole and crack in sleeve.

  本文主要介绍了卧式离心机铸造大直径铸钢套筒方法，讨论了降低套筒气孔和铸造裂纹的工艺措施。

• the steel casting water-based bauxite overpouring coating has been studied by means of orthogonal experiment. the optimum prescription of overpouring coating has been determined.

  通过正交试验方法对水基铝矾土铸钢流涂涂料进行了研究，确定了各项工艺性能最佳的流涂涂料配方。

• solidification microstructures in heavy section high manganese steel casting were simulated using coupling cellular automaton(ca)and finite element method(fem).

  采用元胞自动机与有限元相耦合的方法模拟厚断面高锰钢铸件凝固组织。

• in this paper, the influence of various parameters on suspension shearing dry strength and permeability of epc coating used on steel casting through right angle test was studied.

  通过正交试验，研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。

• we ought to take the coordinative measures so as to energetically spread the eaht process in the production trades for steel casting rolls.

  建议应采取协调措施，在铸钢轧辊生产行业中大力推广eaht技术。