英汉例句

• the influences of fluoride, limestone and silicate on the welding technicalities of super low carbon martensite stainless steel electrode and anti blowhole ability in welded metal had been studied.

  系统研究了氟化物、大理石和硅酸盐对超低碳马氏体不锈钢焊条的焊接工艺性能和抗气孔性能的影响。

• the effects of macroscopic fracture surface patterns and microstructure of slag of stainless steel electrode on the slag detachability have been analyzed.

  根据实验结果，分析了不锈钢焊条熔渣宏观断口形貌和熔渣的微观结构对脱渣性的影响。

• it is difficult to avoid the cracks using mild steel electrode and common welding technologies.

  用普通碳钢焊条与一般焊接工艺是很难避免裂纹的。

• in this paper various metal transfer modes in the pulse mig welding with steel electrode are studied by means of high speed cine camera and oscillograph.

  本文利用高速摄影机和示波器研究了钢焊丝熔化极脉沖焊的各种熔滴过渡形式，试验是在平焊和仰焊位置进行的。

• buttering with a102d stainless steel electrode on tch edges and comers of zg310 - 570 rotor then hardfacing with d682 electrode there, the cracking problem is overcome.

  介绍了用a102d不锈钢焊条打底，d682焊条堆焊密炼机zg310—570转子棱峰，解决了堆焊层裂纹问题。

• ordered monolayers of s- and n-containing amphipathic corrosion inhibitors were depoitod onto the surfaces of carbon steel electrode with super-molecular assembly technique.

  应用超分子组装技术将含硫和含氮的双亲性金属缓蚀剂有序单分子膜按设计方式修饰在碳钢表面。

• the orthogonal design has been applied to the optimization of the coating prescription of(structural) steel electrode with low fume.

  采用正交优化设计的方法实现了对低烟尘结构钢焊条药皮配方的优化设计。

• the film formed on the stainless steel electrode under the potentiodynamic polarization with increasing sweep potential.

  随着极化电位向阳极区移动，不锈钢电极发生阳极氧化，形成了氧化铀沉积膜。

• the main products are flux-cored wire, co2 gas shielded welding wire, submerged arc welding wire, carbon steel electrode and stainless steel electrode.

  海翔焊接材料有限公司生产的主要产品有药芯焊丝、co2气体保护焊丝、埋弧焊丝、碳钢焊条以及不锈钢焊条。

• in order to analyze quantitatively the effect of coating ingredients on the usability of electrode, the slag detachability of stainless steel electrode was studied, using the computer software ust4.

  为了定量地分析药皮辅料对焊条工艺性能的影响，利用中国数学会均匀设计分会推荐的ust4。

• in this paper, a variable model of optimum droplet transfer mode for pulsed gma welding using a steel electrode is developed on the principle of the micro-interference instability of magnetofluid.

  前言：基于磁流体微扰动「失稳」的原理，建立了钢焊丝脉沖gma焊最佳熔滴过渡形式的参数模型。

• study on the slag detachability of stainless steel electrode based on uniform design method;

  焊条渣壁过渡形态的倾向大小是衡量不锈钢焊条工艺稳定性的主要标志。

• aluminum coated steel electrode for use in welding the water wall of the boiler has been developed.

  本文在分析渗铝钢焊接规律的基础上，研制了一种发电厂锅炉水冷壁渗铝钢，焊条。