片语

steel flower tube钢花管

Stainless Steel Heating Tube不锈钢管热体

glass steel wind tube玻璃钢风管

stainless steel capillary tube不锈钢毛细管

commercial steel & tube型钢，条钢；普通钢；商品钢材

Stainless steel welded tube不锈钢焊接管

stainless steel boiler tube不锈钢锅筒

steel pipe[材] 钢管

英汉例句

• the effect of economics on the design of vertical type steel tube air preheater is discussed with the structural design formula being given.

  讨论经济性要求对立式钢管空气预热器设计的影响，导出结构设计公式。

• the circular section concrete-filled steel tube structures have good performance because of uniform restraint of concrete provided by circular steel tube.

  圆形截面钢管混凝土结构因为圆钢管对核心混凝土均匀的「约束」而具有良好的性能。

• therefore, high building structure construction, segmentation cantilever of the fastener type steel tube scaffold built very common application.

  因此，高层建筑结构施工中，分段悬挑搭设的扣件式钢管脚手架应用得非常普遍。

• in order to solve the problem, reconstruction algorithms of steel tube from few projections are researched and the results are validated with simulation data in the paper.

  为了加快钢管检测的速度，本文研究了少投影条件下钢管截面的图像重建算法并通过模拟数据验证了其重建的效果。

• according to the specific circumstances of the project can also take charge of construction directly welded pipe, but must check a stainless steel tube joint can demand reinforcement.

  依据工程的详细状况也可以采取主管上直接焊接支管的构造，但必需校核支不锈钢管衔接处能否需求补强。

• the master production scheduling(mps) problem of hot rolling seamless steel tube is formulated as a mixed integer linear programming model.

  建立了热轧无缝钢管主生产计划问题的混合整数线性规划模型。

• the paper introduces construction technics and control point of bowl fasten mode steel tube bracket.

  介绍了碗扣式钢管脚支架的施工工艺和控制要点。

• mooring bollards being fabricated from steel tube and solid bar.

  系泊柱正在编造由钢管和固体酒吧。

• construction quality of internal and external anti-corrosion is directly related to service life of the tubes, and the comprehensive cost of the steel tube is relatively high.

  内外防腐的施工质量直接和管道的使用寿命有关，且钢管的综合造价较高。

• stainless steel tube surface after sand blasting become rough and very evenly, can enhance the paint adhesion layer on the surface of stainless steel pipe.

  不锈钢管表面经过喷砂变得粗糙又很均匀，能增强油漆层对不锈钢管表面的附着力。

• bring forward two ways to compute the center line of steel tube and analyze thein respectie application.

  提出管塔制作中钢管中心线的两种计算方法，并分析它们的适用情况。

• steel tube structure has been widely applied to modern architecture, especially to long-span architecture, due to its various advantages.

  钢管结构因其诸多优越性在现代建筑尤其是大跨度建筑结构中应用广泛。

• stress and metal flow in steel tube during sizing process were analyzed.

  分析了定径过程中钢管内金属流动和弹复行为。

• a vertical stiffening rib joint is suitable for rectangular steel tube column with smaller section to h-beam connection.

  垂直加劲肋节点适用于柱截面较小的方钢管（矩形管）柱和h型钢梁节点。

• but stainless steel tube outer wall and the outer wall of the copper pipe which pipe bead setting more is still unclear, but can say two pipe wall mostly film condensation.

  但不锈钢管外壁和铜管外壁哪种管材的珠状凝结更多尚不清 楚，但可以说两种管材外壁大部份是膜状凝结。

• intersecting joint has become the major one in steel tube structure, for its advantages in load-carrying capacity, steel-saving, simple construction, legerity, elegance and so on.

  而相贯连接钢管结构更以其受力性能好、节约钢材、施工简单、轻巧优美等优点成为目前钢管结构中最主要的结构形式之一。

• the design principle and realization method of a new kind of radiographic welding seam inspection system for steel tube were introduced.

  介绍了一种应用于钢管焊接接头检验的射线透视系统的设计原理与实现方法。

• test results show that the concrete-filled steel tube and the reinforced concrete deform simultaneously in the axial direction before and at the peak value of axial compressive force.

  试验结果分析表明，峰值承载力前和达到时，钢管和管外钢筋混凝土纵向变形一致；

• as a type of concrete-filled steel tube structure, concrete-filled square steel tube structure is widely applied in engineering, but the research on its connection is not enough.

  方钢管混凝土结构作为钢管混凝土结构的一种形式，其工程应用已日益广泛，而其节点的研究还不够完善。

• because of good mechanical performance, concrete-filled steel tube structures have been used for hundreds years in civil engineering.

  由于良好的力学性能，钢管混凝土结构在土木工程中的应用已有上百年历史。

• a steel tubular intersecting joint is one of the main joints in steel tube structures.

  钢管相贯节点是钢管结构中最主要的节点形式之一。

• the paper introduces cad system of steel tube cold drawing process which is a software with optimum function developed by iron & steel general institute on basis of computer imitation technology.

  介绍了北京钢铁研究总院采用计算机仿真技术与计算机辅助设计技术，开发出具有优化功能的钢管冷拔过程cad系统通用软件。