strength test中文,strength test的意思,strength test翻译及用法

2026-04-14 10:16 浏览次数 18

strength test

[streŋθ test]

强度测试;体能测验

strength test 片语

片语

Physical Strength Capacity Test Area体能测试区

strength of test block试体强度

strength h test强度试验

Shear strength parameter test抗剪强度参数试验

Compressive strength of test specimens试样的压缩强度

Flexural strength of test specimens试样的弯曲强度

RF Field Strength Susceptibility Test辐射耐扰度测试

physical fitness test体能测验;身体适宜性测验

no-strength temperature test无强力温度试验

physical test物理试验;体能测验

strength test 例句

英汉例句

  • the specifications for seat sealing test, body sealing test, body strength test, valve long term test, fatigue strength test and operation torque of plastic valves were summarized.

    汇总了塑料阀门产品所需性能要求的阀座密封试验、阀体密封试验、阀体强度试验、阀门长期试验、疲劳强度试验和操作扭矩的规定。

  • by using cube compressive strength test and sem, the inherent reason of the bad influence can be explored.

    通过立方体抗压强度试验和电子显微镜(sem)研究高含盐量对水泥土强度影响的内在机理。

  • the dielectric strength test is to be performed between each pair of conductors (including ground if applicable) and between each conductor and the foil wrapped cord guard.

    电介质强度试验是在每对导体(包括地)之间和每个导体与包装了金属薄片的尾档之间测量。

  • described are the lightening design, energy absorption car-body design, finite element analysis, static strength test and modal analysis calculation.

    介绍了北京八通线地铁车体钢结构的轻量化设计、吸能车体设计、有限元分析、静强度试验和模态分析计算。

  • the interfacial compatibility can also be observed through the shear strength test of the pvc-mbs heat adhesive sheet.

    通过pvc-mbs片材的热粘合样品的剪切强度试验,也可观察它们界面的相容程度。

  • method mud invasion process is simulated with conventional three axis rock strength test device under same downhole pressure and temperature.

    方法采用常规三轴巖石强度试验装置,进行井下温度压力条件下的泥浆侵入过程模拟试验。

  • rapid wet strength test method of fruit cultivation bag paper can be applied for production and quality control.

    采用生产快速检测方法检测育果袋纸的湿强度,可以满足生产及产品质量控制要求。

  • the cord set completed required cycles of flexing with no occurrence of end results and also successfully completed the dielectric strength test without breakdown.

    插头完成了要求的弯曲周期,没有出现上文所提到的最后结果,并且通过了电绝缘强度测试,没有损坏。

  • this paper deals with the realization of dimension calculations general programming, parts pattern auto -forming and strength test in the whole parameter cad software of the round hole broach.

    论述了圆孔拉刀全参数化计算机辅助设计软件中有关拉刀各部分尺寸计算,总体程序设计,自动生成零件图及其强度校验的实现方法。

  • based on the ultimate tensile strength test and extension test under confining pressure, the characteristics of flexible concrete are studied.

    通过极限抗拉强度试验和围压作用下的拉伸试验,研究了柔性混凝土的抗拉破坏特性。

  • the paper introduces requirement of valve strength test and leakage test, analyse universal problems of valve test, and put forward test technology of valve.

    介绍了阀门强度试验和密封试验的要求,分析了阀门试验中存在的普遍问题,提出了阀门试验工艺。

  • strength test and durable experiments were carried out on all the vessels after assemblage the cell.

    加工装配完毕后,所有容器都进行了强度和稳定试验,达到了预期效果。

  • the paper based on increased the low-constant temperature test box on the electronic universal testing machines, has finished the uniaxial load strength test of artificial freshwater ice.

    通过对电子万能试验机增加低温恒温试验箱,实现了人工淡水冰的单轴加载强度试验。

  • strength test for each heat-sealing seam during heat-sealing.

    热合过程中每道热合焊缝的强度检测;

  • by analyzing the case of the dielectric strength test on household top-heating automatic soymilk machine , this paper briefly discuss two questions which should be pay attention to during safety test.

    从结构设计和元器件选用两方面分析了上加热式家用全自动豆浆机在抗电强度试验时遇到的问题,并就安规测试中需要注意的问题进行了论述。

  • the standards, test methods, judging rules and the requirements for test reports which are involved with mechanical strength test of transformer tanks are generally introduced in this paper.

    概述了变压器油箱机械强度试验涉及的标準、试验方法、判定準则及对试验报告的要求。

  • this paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact ferrographical analysis is made.

    本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验,同时还进行了铁谱分析。

  • the development process of the cw-200 series bolsterless bogies is described. the structure, dynamics, strength test results and operation of the series of bogies are described.

    叙述了cw—200系列无摇枕转向架的研制过程,介绍了该系列转向架的结构、动力学和强度试验结果及运用情况。

  • certain standardized tests require the application of a high power source to the sample to which the dielectric strength test is applied.

    某些标準化测试需要高功率电源应用于样品的电气强度测试中。

  • mix the foam asphalt mixture on the condition of different cement content and adding order, do splitting strength test and analyze the influence of the cement addition on its moisture sensitivity.

    在水泥的不同掺量和不同添加顺序的条件下分别拌和泡沫沥青混合料,并进行劈裂强度试验,分析水泥的添加对其水稳定性的影响。

  • in this paper, according to the require of deep mining, the unconfined uniaxial compression strength test of backfill at a different ratio, different density and different curing age has been done.

    根据矿山深井开采的需要,对不同灰砂配比、重量浓度和养护时间的高浓度水泥尾砂充填体试块在建材压力机上进行了无侧限单轴压缩强度测试。

  • based on discussion of its mechanism, the unconfined compression strength test is discussed and compared with ordinary cement-stabilized soil.

    从水泥土固化机理出发,讨论并对比了掺加工业废料加固土与普通水泥土的无侧限抗压强度试验。

  • described in this paper are the basic structure, main technical parameters and strength test results of the non bolster bogies for metro cars.

    介绍了地铁无摇枕转向架的基本结构、主要技术参数及强度试验结果等。

相关热词