片语

surface rms roughness均方根粗糙度

sea surface aerodynamic roughness scheme海面空气动力粗糙度

surface roughness measuring instrument表面粗糙度测量仪

surface random roughness随机糙度

surface integrated roughness coefficient田面综合糙率系数

sea surface aerodynamic roughness海面空气动力粗糙度

surface e roughness表面粗度

oceanic surface-roughness海面不平度

surface finish quality表面光洁度

surface-roughness factor表面粗糙度

英汉例句

• objective: to evaluate the influence of denture material and its surface roughness on retention of upper complete denture .

  目的：评价全口义齿基托材料及其表面粗糙度对义齿固位的影响。

• it is reported that metal removal rates and surface roughness are controlled by the frequency and intensity of the spark.

  据报道金属材料去除的速度和表面粗糙度由电火花的频率和强度所控制。

• the surface roughness and morphology had great influence on the transmission of the films.

  膜表面的粗糙度和组织形貌对透射率有较大的影响。

• flange surface roughness of the influence, especially sealing effect when using the soft cushion, seal surface coarse degree value big is the main reason for the cause of the leak of one.

  法兰表面粗糙度对密封效果影响很大，特别是当采用非软质垫片时，密封表面粗糙的度值大是造成泄露的主要原因之壹。

• most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.

  大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。

• for influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.

  在表面粗糙度的影响因素和影响规律方面：主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。

• the effects of grinding parameters on surface roughness of marine propeller blade were studied by using orthogonal test.

  通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。

• the advantage is that electrical discharge machining processes with good surface roughness and machines metal of any hardness.

  电火花加工的主要优点是可获得较低的表面粗糙度，并且可以加工任何硬度的金属。

• flange surface roughness of the influence, especially sealing effect when using the soft cushion, seal surface coarse degree value big are caused by the leak is one of the main reasons why.

  法兰表面粗糙度对密封效果影响很大，特别是当采用非软质垫片时，密封表面粗糙的度值大是造成泄露的主要原因之一。

• objective: to investigate the correlation between surface roughness of chromium-cobalt and bacteria adhesion.

  目的：了解临床用软质钴铬合金表面粗糙度与细菌黏附的关系。

• the radar, called the mini-sar, sends pulses of left-polarized radio waves out to measure the surface roughness of the moon.

  那个叫做mini-sar的雷达，通过向月表发射左旋极化电磁脉沖来测定月球的表面粗糙度。

• in order to improve the dimensional accuracy and surface roughness of direct rapid metal tooling(drmt), a laser bevel cutting technique for drmt was proposed.

  为提高直接快速制造金属模具的尺寸精度与表面光洁度，提出了面向金属模具快速制造的激光倾斜切割光整工艺。

• surface roughness codes and their labeling.

  表面粗糙度的代号及其标注。

• under high speed lightly loaded conditions, skidding damage often becomes one of the main damage forms for cylindrical roller bearings while surface roughness has great effect on skidding damage.

  在高速和轻载工况条件下，打滑擦伤往往成为圆柱滚子轴承的主要失效形式，而表面粗糙度对轴承打滑损伤有很大的影响。

• be able to label and read surface roughness codes, codes of size tolerance and fitting, and geometrical tolerance codes.

  会正确注写和识别表面粗糙度代号，尺寸公差与配合代号，形位公差代号。

• effect of different machining parameters upon the inner surface roughness and the removal rate was analyzed.

  分析了不同加工参数对被加工内圆表面粗糙度和研磨量的影响。

• the surface roughness parameters can be measured in the time by a computer. compared with metrological wyko profiler, the measured results are consistent.

  计算机控制测量，即时给出表面粗糙度参数，测量结果与计量用wyko轮廓仪比对，结果吻合。

• the stability of the worktable will affect the surface roughness of the hole wall, which will affect the hole size precision seriously.

  工作台进给的平稳性会影响孔壁的表面粗糙度，严重时会影响孔的尺寸精度。

• studying the air flow around soccer balls is a natural extension of mckeon's research, in which she and her colleagues study how surface roughness affects air flow, using spheres as test models.

  研究足球周围的气流是麦凯恩课题的一个自然延伸——她和她的学生正在研究粗糙表面对气流的影响，而足球课作为球体的测试模型。

• the control system can complete the examination of the geometric sizes, the surface defect and the surface roughness once a time, and can realize continuous and automatic examination.

  对闭气塞的几何尺寸、表面缺陷和表面粗糙度各参数的检测可以一次性顺序完成，并可实现零件的连续自动检测。

• a subterranean flow of briny water could rearrange sand grains or alter surface roughness in a way that darkens its appearance.

  地下水流的流动会使得沙粒积累，并使得表面变得粗糙，从而颜色更深。

• the steel dies with high dimensional accuracy, low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting.

  直接利用激光快速成型的原型树脂模，结合陶瓷型精密铸造技术，制得了高精度、低表面粗糙度、高使用寿命的钢模具。