片语

wear resistance properties耐磨性能

wear resisting properties耐磨性抗磨性

sliding wear properties滑动磨损性能

abrasive wear properties磨料磨损性能

corrosive impact wear properties沖击腐蚀磨损性能

wear resistant properties耐磨性能

corrosion and wear resistant properties耐磨蚀性能

wear resistant耐磨的；耐磨性

friction and wear properties摩擦磨损性能

wear resistance[材] 耐磨性，耐磨度

rolling wear properties滚动磨损性能

英汉例句

• Effects of speed, load, and temperature on friction and wear properties of the composite are described.

  文中介绍了速度、负荷与温度对该材料摩擦磨损性能的影响。

• The effects of matrix microstructure on wear properties of high-speed steel(HSS) with high vanadium content were studied using pin-on-ring tester, and the failure behaviors were investigated via SEM.

  利用销环式滑动磨损试验机测试了具有不同基体组织的高钒高速钢的干摩擦磨损性能，并利用扫描电子显微镜对其失效行为进行了分析。

• In this paper, wear properties and mechanism of metal multilayer films were studied.

  研究了金属多层膜的磨损特性与磨损机理。

• The wear properties of antiwear adhesive coatings under solid particle erosion and slurry erosion condition were studied in this paper.

  本文对气固沖蚀和浆体沖蚀条件下耐磨环氧胶粘涂层的磨损特性进行了研究。

• The friction and wear properties of SS-4 dry film and SS-2 dry film in vacuum are evaluated.

  本文报导了SS - 4干膜在真空中的摩擦磨损性能，并与SS - 2干膜的性能作了比较。

• Several multiphase systems based on UHMWPE polymers were made, their friction and wear properties were researched.

  制备了多相混杂填充超高相对分子质量聚乙烯（ UHMWPE）复合材料，研究其摩擦、磨损性能。

• The mechanical properties, friction and, wear properties and fracture morphology of nylon 1010 systems toughened with PE and PEg—PMAA have been investigated.

  研究了聚乙烯、接枝聚乙烯增韧尼龙1010多相复合体系的力学性能和摩擦磨损性能及其破坏形态。

• Through simulation tests, the effects of lubrication methods on its wear properties are investigated and results show that the spray lubrication can reduce its wear volume.

  通过模拟实验，研究了润滑方式对低速重载齿轮磨损性能的影响，得出了喷油润滑可减少低速重载齿轮磨损量的结论。

• Microstructure and friction wear properties of the two kinds of coatings were investigated by comparison.

  对比研究了手动与自动复合电刷镀镀层的组织与摩擦磨损性能。

• The friction and wear properties of PTFE and graphite filled PTFE were studied in different loads, lubrications and times, and these properties were analyzed and compared.

  对聚四氟乙烯（PTFE）及石墨填充PTFE复合材料在不同载荷、不同润滑条件下，以及在不同对磨时间内的摩擦磨损性能进行了研究。

• The effects of Si content on wear properties of Si-modified high aluminum Zn-based composites were investigated by abrasion test under dry friction and oily lubricated friction conditions.

  采用磨损试验研究了干磨擦和油润滑摩擦条件下，硅含量对含硅高铝锌基复合材料磨损性能的影响。

• The nitrogen dose exerted a great influence on the structures and wear properties of the aluminium implanted with nitrogen.

  在铝的氮离子注入过程中，氮离子的注入剂量对铝基体的表面结构及抗摩擦磨损性能都有很大影响。

• The friction and wear properties and mechanism of three kinds of high polymer slanting wedge materials for frictional damping system of cross-braced bogies were studied.

  对交叉支撑转向架摩擦减振装置所用的三种高分子材料斜楔的摩擦磨损性能及磨损机理进行了研究。

• The friction and wear properties of partially stabilized zirconia (PSZ) lubricated with soft metal or oxide of soft metal are studied.

  文章全面阐述了部分稳定二氧化锆陶瓷(略作psz)以软金属或软金属氧化物润滑时的摩擦和磨损性能。

• Polyurethane rubbers are noted for their high toughness, good strength and wear properties and good oil and oxidation resistance.

  聚氨酯橡胶具有高韧性、良好的强度和抗磨性、良好的抗油性和抗氧化性。

• The friction and wear properties of the sintered samples were analyzed.

  对烧结后的样品进行了摩擦磨损性能研究。

• The results indicate that the wear properties of ZA40 alloy gradually increase as Si content increasing.

  结果表明，随硅含量的增加，ZA40合金的耐磨性大幅提高。

• Abstr: Objective To study the effect of filler size on friction and wear properties of phenolic resin matrix friction materials.

  文章摘要：目的研究填料粒度对树脂基汽车制动摩擦材料性能的影响。

• The wear mass loss is high when the abrasive medium has high hardness, multilayer coating shows better wear properties than single-layer coating in the effect of biggish load.

  磨料的硬度较高时，涂层的磨损质量损失较大，与单层涂层相比，多层涂层在较高载荷作用下具有较好的抗磨损性能。

• Plastic teeth are found to have good friction and wear properties sliding against titanium ball in artificial saliva medium.

  树脂牙在人工唾液介质中同钦球对摩时表现出较好的摩擦磨损性能。

• The tensile, impact, friction and wear properties are studied as the focus.

  重点研究了磨损、摩擦、拉伸、沖击及其结晶性能。

• This reveals not only the effect of the bearing material properties and the size of clearance on friction wear, but also the reason why curve peak values of friction wear properties result.

  从而也阐明了轴承材料性质和间隙大小对摩擦磨损特性的影响，以及摩擦磨损特性曲线峰值产生的原因。

• The wear properties of valve are systemically investigated by using dynamic simulation testing and surface microscopic analysis techniques based on principle of tribology.

  根据摩擦学原理，采用动态磨损模拟试验和表面微观分析研究的方法和技术，对气门动态磨损特性进行了系统的试验研究。