片语

impact wear-resistance抗沖击磨损

wear-resistance surface表面耐磨

wear-resistance coatings耐磨镀层

wear corrosion resistance耐磨耐蚀

wear-resistance coating耐磨涂层

wear-resistance mechanism耐磨机理

wear-resistance material抗磨材料

wear properties耐磨性

wear resistant耐磨的；耐磨性

wear-resistance hammerhead耐磨锤头

英汉例句

• with graphite particle content increasing from 5% to 20%, wear weight-loss and friction coefficient of the composites are obviously declined, greatly improving wear resistance of the composites.

  随着石墨颗粒含量从5%增加到20%，镁合金基复合材料的耐磨性得到明显的改善，磨损质量损失与摩擦系数都降低到较低水平。

• the solid solution of ni matrix and m6c carbide offer a relative high mechanical strength and wear resistance for this composite material.

  基体镍的固溶体和m_6c碳化物相的生成，为材料提供了较高的机械强度和耐磨性。

• the experimental results showed that the wear resistance and microhardness were improved obviously by process.

  结果表明，该项技术大大地改善了这种合金的表面耐磨性和显微硬度。

• the results indicate that the wear resistance of the composites is superior to that of the basis alloy.

  结果表明，含硅高铝锌基复合材料的耐磨损性能优于基体合金；

• wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by sem.

  在磨损试验机上对其耐磨性进行测试，同时利用扫描电镜对试样的磨损形貌进行观察分析。

• the main conclusions are (1) under the test conditions an increase in carbon content (hence amount of eutectic carbides) increases the wear resistance at 800℃.

  主要结论：（1）在本试验的磨损条件下增加碳含量将有益于提高800℃下材料的耐磨性。

• sputtering is now widely applied on cutting tools, forming tools, injection molding tools, and common tools such as punches and dies, to increase wear resistance and service life.

  现在反应溅射法已被广泛应用于切削刀具、成型工具、注射模具和诸如沖头和沖模之类的通用器具，以增强其耐磨性和使用寿命。

• moreover, the mechanism of carbide spheroidizing was analyzed, the influences of carbide spheroidizing on the impact toughness and wear resistance of tawci were also studied.

  对共晶碳化物团球化机理进行了深入分析，并讨论了共晶碳化物团球化对力学性能和耐磨性能的影响。

• the composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.

  合成材料具有更好的承载能力，更低的热膨胀系数，更好的耐磨性和更好的抗疲劳性能。

• high carbon steels are the most hardenable type of carbon steel and are used frequently for parts where wear resistance is an important factor.

  高碳钢是最能被硬化的一种碳钢，常常用于高耐磨性很重要的地方。

• pump cover material with steel zg230-450 more, can also be used ductile iron, the latter two materials contrast of wear resistance and hardness and heat resistance to be because the former.

  泵体、泵盖的材质采用铸钢zg230-450的较多，也可以采用球墨铸铁材质，两种材质对比后者的耐磨性和硬度以及耐温性要因为前者。

• however, in some application conditions, low hardness, big friction coefficient and poor wear resistance confine its extensive application in engineering.

  然而，在某些应用条件下，钛合金的硬度低，摩擦系数大，耐磨性差。

• for carbide glass ceramics stone precious stones and other heavy-load cutting grinding wear resistance .

  用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。

• the results also show that to substitute v with ti is a promising method in improving wear resistance of austenitic manganese steels under low stress wear condition.

  本文的试验结果也说明在低应力条件下以钛代钒来强化胞状硼化物，可获得更高的耐磨性和更大的经济效益。

• the effects of the size, distribution and content of graphite particle upon mechanical properties and wear resistance are studied.

  研究了石墨粒子的大小、分布、含量对机械性能及耐磨性的影响。

• low carbon steels are well suited for the following applications: tool bodies, handles, die shoes, and similar situations where strength and wear resistance are not required.

  低碳钢适用于以下情况：工具机身，把手，模座及其它不要求强度和耐磨性的类似情况。