片语

welded seam impacting toughness焊缝沖击韧性

welded side seam熔接缝

plane welded seam平面焊缝

welded seam become焊缝形成

strengthening of welded seam焊缝补强

welded joint焊缝；焊接节点

welded seam bursh焊缝裂开

butt-welded side seam[机]

butt welded body seam平焊桶体接缝

welding line焊缝；缝合线

welded seam defect焊缝缺陷

英汉例句

• how to increase the welded seam impacting toughness of erw pipe is a great problem among the technology of pipe manufacture.

  如何提高erw钢管焊缝沖击韧性是制管技术中的一大难题。

• this article explained the correct application of the theory of strength through using the commonly used bevelled halving welded seam as an example.

  以工程中常用的斜对接焊缝的研究为例，说明了力学强度理论的正确应用方法。

• must be identified with the tank that it belong, included the slop tanks, in proper manner, like welded seam or similar.

  所有的人孔盖上必须用电焊或者类似方式做好舱名标识。

• welding temperature is the most important factor which influences the quality of the welded seam in the process of producing erw pipe.

  在高频直缝焊管生产过程中，焊接温度是影响焊缝质量的首要因素。

• introduce welded seam specification, standards performed, inspectation items and acceptable index for welding of body and joint pipe.

  介绍了阀体与接管焊接的焊缝技术要求、执行标準、检验内容及合格指标。

• the reasonable widths of backup strip are experimented with the strength factor of the welded seam for a particular kind of pvc/pes.

  pes背贴焊接缝合试验，得到了应力-应变曲线、背贴条宽度、焊接缝合强度系数；

• the article analyzes that all factors effect impacting toughness of welded seam of erw pipe on the basis of mass produce and practice.

  在大量生产实践的基础上分析了影响erw直缝电阻焊钢管焊缝沖击韧性的各种因素。

• it puts forward welded seam automatic tracking system based on dsp vision sensor and presents the system main hardware block and software design briefly.

  提出一种基于dsp(数字信号处理器)的视觉传感器焊缝自动跟蹤系统，并对系统主要硬件模块及软件设计做了简要介绍。

• the striation spacing in heat affect zone and welded seam samples was wider than that in matrix sample, this shows that fatigue crack propagation...

  焊缝区和热影响区试样的辉纹间距较基体区的大，说明裂纹扩展速率快，焊缝和热影响区的抗裂纹扩展性较基体差。

• the fatigue analysis about the welded seam region where stress is concentrated is dis- cussed by a experience formula and the related measure is put f…

  运用经验公式对应力集中的焊缝周围进行疲劳分析，提出相关措施。

• in this paper, the influence of the draw rib setting on the welded seam movement for the tailor-welded blanks (twbs) was analyzed.

  分析了拉深筋的设置对激光拼焊板成型时焊缝移动的影响。

• it analyses the existed problem during design and construction and puts forward suggestions to the welded seam inspection and acceptance criteria...

  对于国内目前采用的焊缝探伤及验收标準，分析了设计和施工中存在的问题，并提出了一些建议。

• but high energy beam welding makes the welded seam become braze-welding when adding fill material.

  但加填充材料对铍进行高能束焊接可使焊缝形成钎接焊。

• this welded seam is found an obvious air hole and an unqualified undercut with macroscopic check.

  这个焊口以宏观检查发现明显的气孔和超长的咬边。

• the technology of intelligent flaw detection is adopted in the system, realizes the inspections of high accurate welded seam automatic tracking.

  采用智能化探伤技术，实现了高精度、快速焊缝自动跟蹤的检测。

• the experiments show that the welded seam is good and the metallurgical joint was achieved without melting the shell body.

  试验表明，焊缝成型良好，在弹体不发生熔化的前提下实现了冶金结合。

• it assays technological parameter and major features of abrasive belt grinding. it also discusses the ways as to the improvement of productivity and quality of wiping out welded seam and polishing.

  设计了去焊缝及抛光用的砂带异型涂附磨具及砂带磨削装置，分析了砂带磨削工艺参数和主要特点，讨论了提高去焊缝及抛光加工质量、生产效率的途径。