片语

a working surface工作面

cavity working surface型腔工作面

working face工作面；施工面；回采工祖

westbank working surface工作面

Non-working surface不加工面

working occlusal surface咬合工作面

working surface supports工作面支护

Working Range Surface Grinding平面磨加工范围

Working and Walking Surface工作与行走表面

working surface types机体型式

英汉例句

• through processing along ditch coal mine 23702 working surface fire accident case analysis …through processing the ditch edge coal 23702 working …

  通过处理沿沟煤矿23702工作面火灾事故案例分析．这句话如何翻…

• the micro-pits of working surface between friction pairs with regular profiles can modify surface tribology character, improve lubrication and wear-resisting.

  在摩擦副表面加工一定规则形貌的微凹坑可改善表面摩擦特性，提高润滑、耐磨性能。

• the microhardness of various point of milling working surface gradually reduces with the increase of distance of cutting surface, and then remains flat.

  垂直于铣削加工面各点的显微硬度，随着距切削表面距离的增大而逐渐降低，且趋于平缓；

• the clamping process of seed-filling structure has be studied, and obtain the relations of auxiliary clamping force, roughness of working surface and stability of seed-clamping.

  研究分析了取种机构的夹持过程，得出了辅助夹持力和夹持机构工作面的粗糙度与夹持稳定性的关系；

• in order to removing tunneling working surface outburst quickly and effectively, combine the six mineral coal beds characteristics, hydraulic pressing are taken to remove outburst measure.

  为了快速、有效地消除煤巷掘进工作面的突出危险性，结合六矿煤层赋存特点，采取水力挤出消突措施。

• bearing contact fatigue failure of the working surface by means of alternating the role of stress arising from failure.

  接触疲劳失效系指轴承工作表面受到交变应力的作用而产生失效。

• the common conjugate surface includes tooth surface of gear, working surface of solid cam, helicoidal surfaces existing in spiral burr, worm, chip flute of cutters, and so on.

  常见的共轭曲面包括齿轮的齿面、空间凸轮的工作面和螺旋面等，其中螺旋面被广泛应用于螺纹、蜗桿、螺桿泵及金属切削刀具等领域。

• the paper introduces a new way of roof management by analyzing the high temperature, fragile roof in the working surface in qujiang which has obtained a better result.

  针对曲江回采工作面温度高，顶板破碎等特征，采用「见四放一」方式管理顶板，取得了较好的成效。

• it transfers heat quickly cut evenly, so that the work of quenching hard and small, it detergency can keep working surface bright, has good oxidation stability and thermal stability.

  它传热速度快切均匀，使工作淬的硬且变小，它的清凈作用能保持工作表面光亮，具有良好的抗氧化稳定性性和热稳定性。

• corresponding optical laser mouse ball working surface is subjected to three-dimensional disordered array of dots.

  表面立体结构，适合大多数激光，光电，滚球类鼠标使用。

• analysis is made on the dark lines defects occurring over the working surface of flange by measurement with the optical microscope, scanning electro microscope (sem) and electronic probe.

  针对法兰盘加工面上出现的黑纹缺陷，采用光学显微镜、扫描电镜和电子探针等测试方法对其进行了分析。

• finally the working surface of a tec device was connected to the surface of alloy material to check the performance of the system.

  最后，将tec工作面与铝合金片材结合，观察铝合金材料表面温度对目标温度变化的跟随效果。

• analyze the cause and treatment of worn working surface of bearing pads for induced draft fan, after welding repair , the broken babbit alloy bearing pads in actual application has good usage effect.

  简单分析了引风机轴瓦工作表面磨损的原因和处理方法，实际应用中损坏的巴氏合金轴瓦经过焊接修复后，使用效果良好。

• features: whole fibers liner light weight, warming faster, metal muff take gas province, with convenient, automatic working surface is bright and clean, hardness evenly.

  性能与特点：全纤维炉衬重量轻、升温快、金属马弗耗气省，自动便捷，处理后的工作表面光洁、硬度均匀。

• integral 3-straight rib stabilizer, integral 4- straight rib stabilizer, working surface are provided with carbide insert compound or overlay welding, etc.

  整体三、四棱、多棱直棱稳定器，其工作表面有镶硬质合金复合体及堆焊等。

• when supporting, as far as possible face plate's working surface will adjust in the horizontal plane.

  支承时，尽量将划线平台的工作面调整到水平面内。

• the effects of material composition, working surface treatment and microstructure on wear resistance of powder hot-forging flow oil-seal ring were studied.

  研究了粉末热锻浮动油封密封环的材质、表面处理、显微组织对其耐磨性的影响。

• pipe lodgepole-steel tunnel support technique is a strong composite support system consisting of advance pipe lodgepole, support stell vault, tin plate packer and working surface plug-back.

  管棚复合钢支撑技术，是一个通过超前管棚、支撑钢拱、白铁皮隔离、工作面封堵的相互配合和共同作用，形成了具有强大支护抗力的复合支护体系。

• the fatigue of working surface of ring is friction fatigue, and not con- tact fatigue.

  钢领工作表面的疲劳属于摩擦疲劳，而不是接触疲劳。

• the working surface of the face plate is a smooth face or a concave-convex bodies shape with patterns.

  所述的面板的工作表面设为平滑面或凹凸形体、图案。

• the position of the contact line of screw rod working surface and star-wheel working surface on the star-wheel working surface is continuous and free.

  螺桿工作面与星轮工作面的接触线在星轮工作面上的位置是连续并且游离的。

• an optimization design for prestressed die inserts is adopted to decrease pressure being applied to the working surface of upsetting die, a…

  使用预应力结构优化设计，降低模具工作表面的应力水平，从而延长了模具的寿命。

• frozen wall produces advanced displacement on the action of ground pressure, and then the rise of working surface has happened.

  在地压作用下，冻结壁产生超前位移，进而引起工作面的底臌。

• and large gap between the working surface and non working surface of the lower guide is basically disappeared.

  下导瓦面的工作面及非工作面的微小差别基本消失。

• along with the tunneling working surface mechanization development, the mixed style ventilated the way already widely to apply.

  随着掘进工作面机械化的发展，混合式通风方式已经被广泛地应用。