片语

deformation-resistance measures防变形措施

deformation resistance force变形抗力

deformation resistance mathematics model变形抗力数学模型

Deformation-Resistance Effect应变

deformation resistance models变形抗力模型

the deformation resistance变形抗力

deformation resistance structure building抗变形结构建筑

deformation resistance curve变形阻力曲线

mean pure deformation resistance平均纯变形抗力

英汉例句

• the equation of friction coefficient with deformation resistance was derived.

  建立了摩擦因数与变形抗力的关系式。

• the friction coefficient is related to deformation resistance and the composition of aluminium alloy.

  其摩擦因数与铝合金的牌号和变形抗力有关。

• by analysing the experimental and actual rolling data, the equation of deformation resistance proposed by moshitami was corrected.

  通过实验和轧制中的实际数据修正了变形抗力的志田茂公式，提出了在武钢生产条件下的变形抗力公式。

• with the increase of forging temperature, the deformation resistance and stress for working are decreased, which brings about the improvement of formability.

  随着锻造温度的增加，变形抗力和加工应力减小，合金的成形性能得到提高。

• electroplastic effect can be employed to increase metal forming limit, reduce deformation resistance and improve surface quality of product.

  在金属压力加工中，利用电塑性效应可降低金属变形抗力，增加金属成型极限，改善产品表面质量。

• the results show that eccentricity of ring holder affects the deformation resistance that the velocity field is a non-perfect triangular one.

  结果表明抱辊偏心对变形抗力有影响，辗扩工艺具有不完整的三角形速度场。

• newton iterative calculation was adopted for the solution of non-line equation, which reversed calculation value of strip deformation resistance for process control of cold rolling as variable.

  采用牛顿迭代法，对冷轧过程控制带钢变形抗力后计算值进行非线性求解。

• therefore, the mathematic expression of deformation resistance of 304 stainless steel strip continuous casting was obtained according to the model built.

  因此，根据建立的计算模型得到了薄带连铸304不锈钢的变形抗力数学表达式。

• measuring the cold rolled deformation resistance by applying this technology can improve the test results, and widen the application range.

  介绍了用热模拟实验机测定冷轧变形抗力的测试过程和测试结果。

• the deformation resistance models of two steels during hot rolling have been established with regression analysis of reasonable structural formula.

  用合理的模型结构形式回归了两钢种的热轧变形抗力模型。

• the higher-temperature deformation resistance of asphalt mixture is evaluated by rutting test;

  采用车辙试验评价了沥青混合料的高温抗变形能力；

• therefore, a equation of deformation resistance suitable for the product of wuhan iron and steel co. has been derived.

  通过实验和轧制中的实际数据修正了变形抗力的志田茂公式，提出了在武钢生产条件下的变形抗力公式。

• when other conditions keep the same, with the increase of deformation temperature or the decrease of strain rate, deformation resistance of the alloy is decreased.

  当其他条件相同时，随着变形温度的升高或变形速率的降低，合金的变形抗力逐渐减小；

• the rheological model of segmented function of high temperature deformation resistance was established. the calculated results by the rheological model were in good agreement with experiments.

  并且建立了高温变形抗力的分段函数流变模型，该模型计算结果与试验值吻合较好。

• at the same time, the deformation resistance mathematics model of micro-alloy low-carbon bainitic steel is established, and the calculated results accord with the experimental values.

  同时，建立了微合金低碳贝氏体钢的变形抗力数学模型，回归分析结果表明与实测结果吻合较好。

• moreover, the evolution equations of isotropic deformation resistance which has fading memory on the cyclic deformation behavior of previous history are deveopled.

  还提出了对先前加载历史循环变形行为衰减记忆的各向同性变形阻力演化方程。

• the deformation resistance of most of the metallic materials is influenced by the strain rate.

  金属材料发生塑性变形的阻力通常与加载的应变率有关。

• the model of the deformation resistance of weathering steel is calculated by measured value and it has higher fitting precision.

  用实测值回归出了耐候钢的新型变形抗力模型，而且该模型具有较高的拟合精度。

• moreover, it is revealed that the deformation resistance in the thermal cycle process is related to the increase of its tensile stress and the decrease of yield strength.

  研究进一步表明，材料变形的难易程度又与变温循环过程，热疲劳试样拉伸应力的增加和材料屈服强度的降低有关。

• the friction coefficient is related to deformation resistance and the composition o…

  建立了摩擦因数与变形抗力的关系式。

• therefore, deformation resistance of 304 stainless steel was obtained according to the mold built.

  因此，根据建立的计算模型得到了304不锈钢板带的变形抗力数学表达式。

• deformation resistance of the two-pass hot deformation of low carbon mn-nb steel has been examined by means of the simulation method of hot torsion.

  用热扭转试验方法，对低碳锰铌钢两道次热变形过程中的变形抗力进行了研究。

• the results show that best permanent deformation resistance can be got when continuous dense gradation, which has even arrangement of coarse and fine aggregate is adopted.

  结果表明，采用粗细集料搭配均匀的连续密级配和适中的沥青用量可以获得最佳的抗永久变形能力。