英语释义

1. having one or more flanges
Such a flanged ax became widespread only when bronze, an alloy of copper and tin, arrived in Europe shortly before 2000 b.c.
— Brenda Fowler flanged pipes

片语

flange connection法兰接头；法兰联接；凸缘联接

bolted flange栓结法兰；联接法兰；螺栓结合凸缘

flanged valve法兰阀；凸缘阀

flanged housing[机]

flange plate凸缘板

flanged bobbin有边筒子

flanged motor凸缘电动机

flange joint凸缘接合

wheel flange[车辆] 轮缘，轮凸缘

flanged head板边封头

blind flange盲板；堵塞法兰

flanged chart折边卡片

flanged bend法兰弯头

top flange上翼缘；上凸缘

connecting flange连接法兰；联接凸缘

flange width法兰宽度；[机] 凸缘宽度；轮级宽度

Flanged Base法兰底座

bottom flange下翼缘；下阀盖

welding neck flange[机] 对焊法兰

flange thickness[铁路] 轮缘厚度；法兰厚度

flanged seam[机]

英汉例句

• The static temperature field distribution of flanged joints was simulated by 3-d FEA, the results show that the calculative values accord well with data of the measurement.

  利用3 - D有限元法模拟了法兰接头的稳态温度场分布，结果表明计算值与实测数据吻合较好。

• This unit features two 128-gallon (480 liters) mixing tanks, a 30-gallon (118 liters) holding hopper and a flanged inlet progressive cavity grout pump.

  该机组具有两个128加侖(480公升)混合灌、一个30加侖(118公升)料斗和一个带凸缘的灌浆泵。

• The causes that may induce the leakage of the big-sized flanged heat exchangers were analyzed, and some feasible solution programs were proposed in the design of seal structure.

  对可能造成大型法兰式换热器泄漏的原因进行了分析，重点从密封结构的设计方面提出了一些可行的解决方案。

• For the special flanged head at reducer section on shells, the plan shall depend on the fabrication capacity of plants.

  对于壳体上的特殊变径段折边封头，应视工厂加工能力采用相应方案。

• Then a new method is proposed to calculate the flanged connection system for rocket motors under the bolt-up and operating conditions.

  然后考虑蠕变-松弛作用，提出了在预紧和操作情况下火箭发动机法兰连接系统载荷与变形计算的新方法。

• An attempt was made to define the safety grade of flanged connections according to target leakage rates described in domestic gasket standards and tightness rates of joints stated in PVRC of ASME.

  根据国内垫片标準规定的泄漏率指标和美国PVRC对连接系统划分的紧密度等级，尝试定义了法兰连接系统的安全性等级。

• NIBCO flanged ball valves provide precision, performance and value for industrial flow control applications.

  美国尼伯科法兰球阀提供精确地、高性价比的工业流体控制应用方案。

• Certain system configurations involving direct connection of a Swing Check Valve to other flanged equipment may require consideration of this bolt clearance.

  某些系统配置，包括旋启式止回阀直接连接到其他法兰设备的场合可能要求考虑这种螺栓所需要的间隔。

• This adapter may be threaded or welded onto the casing, and may have a flanged or clamped connection to match the BOP stack or wellhead.

  该接头也许是用螺纹与套管连接在一起，或焊接在一起，以及可能还有一个法兰或卡箍连接与防喷器组或井口配接。

• Wafer, lug, double flanged and extended body styles.

  对夹，凸耳，双法兰和加长阀体类型。

• Ball Valves with flanged connection to be or an alternative as per Contractor「s recommendation, subject to approval by Client.

  带法兰连接的球阀或替代阀门由承包商提出建议，由业主批準。

• Flanged: There are several steps to follow to make sure that a flanged joint will be properly assembled.

  法兰连接：为了确保正确进行阀兰连接安装，需要遵循如下几个步骤。

• Bolted flanged connections are the most commonly used in petrochemical equipment and piping system.

  螺栓法兰连接是石油化工设备和管道中应用最为广泛的密封形式。

• Two types of end are standard on steel pipes and fittings, that is flanged and screwed.

  钢管和管件有两种标準端部型式，即：法兰和丝扣。 。

• The Rosemount 8705 flanged sensors are fabricated from stainless and carbon steel and welded to provide a hermetic seal that protects against moisture and other contaminants.

  罗斯蒙特8705法兰传感器是由不锈钢制成，碳钢和焊接提供密封产品，对水分和其他污染物保护。

• The numerical result shows that the maximal stresses of the whole spherical tank locate at the edge of the bottom」s flanged opening.

  计算结果表明，整个球罐的最大应力发生于球罐底部的凸缘开孔的周边。

• A. N. S. I. Standard b16.1-covers cast iron pipe flanges and flanged fittings (Class 125 and 250).

  标準B16.1 -包括铸铁管道法兰和法兰连接件(125磅级和250磅级)。

• In recent years, owing to the great number of flange joints and complexity of work condition, the failure rate of flanged joint system is increasing continuously.

  近年来，由于法兰连接系统数目的增加、工况条件的复杂性，法兰连接系统的故障率也不断的上升。

• Also new for this kit are flanged chassis stand offs, just because they look cool.

  此外，新的这一套是备用的底盘法兰平衡，公正，因为它们看上去很酷。

• Creep relaxation of bolted flanged connections often gradually results in residual stress reduction of the gasket, and lead to leakage failure of bolted flanged joints at elevated temperature.

  长期工作在高温下的法兰连接系统，由于密封垫片和螺栓的蠕变松弛，使得垫片上的残余压紧应力逐渐减小，并最终导致连接系统的泄漏失效。

• Focuses on the double 「o」 ring connection, the scene ends meet connections, flanged connections, such as connections and their respective conditions of application and quality control points.

  重点论述了双「〇」圈连接、现场糊口连接、法兰连接等连接方式及其各自的适用条件与质量控制要点。

• Features traditional flanged construction and simple design to enhance reliability.

  特色传统法兰建设和简单设计，以提高可靠性。

• The concept of the tightness of bolted flanged connections was proposed.

  提出了高温螺栓法兰连接的紧密性概念；