片语

strap steel扁钢，带钢

flat die steel模具扁钢

Flat Threaded Steel扁

Flat ring Steel扁弹簧钢

flat spiral steel wire扁螺旋钢丝

Flat Strip Steel平钢带

Flat Bulb Steel球扁钢

flat bars扁钢；条钢

flat spring steel扁弹簧钢，扁簧钢

Flexible Flat Drill Steel挠性扁钢钎

英汉例句

• Up. to the present, there are not complete theoretical formulas for calculating yield pressure and burst pressure for high pressure vessels with a thin inner core and wound flat steel ribbons.

  扁平绕带高压容器的屈服压力和爆破压力，至今尚无较完整的理论计算公式。

• A unique wound flat steel ribbon pressure vessel is proposed to be used in cryogenic engineering in this paper.

  本文提出将我国独创的扁平绕带式压力容器技术应用于低温工程中，这必将带来安全、经济的应用效果。

• SAIL's wide range of long and flat steel products are much in demand in the domestic as well as the international market.

  丰富的产品大纲、较高的市场占有率、广泛的下游客户群以及良好的财务状况都是SAIL的优势所在。

• With the accelerated elimination of backward production capacity, the supply of long steel has been gradually reduced, while there has been a rapid increase in the flat steel supply.

  加快淘汰落后生产能力，长钢的供应量已逐渐减少，而扁钢供应迅速增加，出现了。

• The flat steel plate wall shall be strengthened by the vertical stiffeners and horizontal webs, and provided with walking platform with handrails.

  平板围壁应该使用垂直扶强材和水平桁加强并且提供有扶手的步行平台。

• Steel rings made of flat steel wires have been used in full steel loading meridian tyre without inner tyre before 10 years in advanced countries in Europe, such research in China is lacking.

  欧洲发达国家10年前已将扁钢丝制成的钢丝圈用于全钢无内胎载重子午胎，我国这方面技术研究还不多。

• The test results show that a good effect can be achieved with the joints reinforced by CFRP sheets and flat steel plate.

  从对试验结果分析看，榫卯节点采用CFRP布和扁钢加固后都取得了良好的效果。

• The flat steel bar studied in this article has the very important status in an accelerating device, once the flat steel bar expires, it will cause the entire accelerating device destroyed.

  本文中所研究的扁钢条在某型号加速装置中具有很重要的地位，一旦扁钢条失效，将导致整个加速装置的破坏。

• Its guide apparatus features that the guide roller for rolling flat steel has 1-3 ring slots on its circumference.

  本发明的导卫装置其改进是扁钢导卫导向轮的外圆开制成1 -3道环型圆弧凹槽。

• Partly packing flat steel reinforced concrete column, with its advantages of saving steel and convenience in construction, is being widely used.

  部分外包钢混凝土柱具有节省钢材、施工方便的优点，适用范围广。

• We also buy flat steel from Mexico and deliver to western Europe.

  我们还从墨西哥购买扁钢和交付到西欧。

• Basis for theories of flat steel gate design, module system and key technique of system design in PSGCAD system is expounded. The process of flat steel gate design is introduced in PSGCAD system.

  以平面钢闸门设计理论为依据，阐述了PSGCAD系统的模块系统以及系统设计中的关键技术，介绍PSGCAD系统设计平面闸门的过程。

• A flat ribbon wound pressure vessel is made up of a thin inner shell, flat steel ribbon layers that are cross-helically wound outside the inner shell, a top cover and a bottom cover, etc.

  扁平绕带高压容器是由内筒、交错缠绕在内筒外的钢带层、端盖和封头等组成的新型壳体结构。

• The influence of processing parameters, such as finishing rolling and temper temperatures, on the hardness and microstructure of 1.2311 plastic die flat steel were studied.

  研究了1.2311塑模钢扁钢尺寸、终轧温度、回火温度等主要工艺参数对其轧后硬度、回火硬度及组织均匀性的影响。

• Besides, adopting corrugated steel web can save the stiffening ribs, which usually need to be added in flat steel web.

  此外，采用波纹钢腹板就避免了平钢腹板中通常都要布置的加劲肋。

• A thin flat steel plaque, coated with the sample, is flexed under specified conditions at a descending series of temperatures.

  薄扁钢牌匾，与样品涂层，是在特定条件下弯曲的温度降系列。

• Something about safety testing and measuring as well as checking calculation for bottom flat steel gate of Shenwo Reservoir was presented in this paper.

  本文介绍了参窝水库底孔平板钢闸门安全检测及复核计算情况。

• With innovative structural characteristics and fine mechanical behavior, flat steel box girder is now the main structural style of large span bridges girders.

  扁平钢箱梁具有新颖的结构特点和优良的受力性能，已成为现代大跨度桥梁加劲梁的主要结构形式。

• Refer to the analysis ot the wide, thin-walled flat steel box girder, it need the space analysis with the general finite element program.

  对于宽幅、薄壁的扁平型钢箱梁结构的分析，需借助通用有限元程序对结构进行空间分析。

• Many supporting structures like ROD baffle, flat steel bar, and ring have been utilized.

  折流桿、扁钢条、空心环等纵流式支撑结构已经投入使用。

• Slabs are heated in reheating furnaces and rolled to the required thickness in hot-rolling mills. The final product is flat steel in coils and thick plates.

  将板坯置入加热炉内加热，并在碾轧机上轧成所需的厚度。最终产物是介于线圈和厚板之间的产品-扁平钢板。

• In this article, one method of using the combined support composed of baffles and flat steel to design tabular heat exchangers with low pressure loss and vibration protection was presented.

  本文对设计降低压力损失和防止振动的管壳式冷却器，提出了一种有效的方法，就是管束采用折流板-扁钢条复合支承。