英汉例句

• Plastic teeth are found to have good friction and wear properties sliding against titanium ball in artificial saliva medium.

  树脂牙在人工唾液介质中同钦球对摩时表现出较好的摩擦磨损性能。

• The friction and wear properties of C/C composites under different braking speeds and pressures were studied.

  研究了剎车压力与速度对C／C复合材料摩擦磨损性能的影响。

• The effect of compound lubricating systems on the friction and wear properties of POM resin was studied.

  探讨了复合润滑体系对POM树脂摩擦磨损性能的改良效果。

• Several multiphase systems based on UHMWPE polymers were made, their friction and wear properties were researched.

  制备了多相混杂填充超高相对分子质量聚乙烯（ UHMWPE）复合材料，研究其摩擦、磨损性能。

• The results show that the pore forming additive increases the pore diameter and the percentage of bearing oil so that the friction and wear properties are improved effectively.

  结果表明：造孔剂的加入有效增大孔径，提高含油率，从而改善材料摩擦磨损性能。

• The friction and wear properties of partially stabilized zirconia (PSZ) lubricated with soft metal or oxide of soft metal are studied.

  文章全面阐述了部分稳定二氧化锆陶瓷(略作psz)以软金属或软金属氧化物润滑时的摩擦和磨损性能。

• Abstr: Objective To study the effect of filler size on friction and wear properties of phenolic resin matrix friction materials.

  文章摘要：目的研究填料粒度对树脂基汽车制动摩擦材料性能的影响。

• Their friction and wear properties were studied with help of a pin-disc type wear apparatus.

  利用销盘式摩擦磨损实验机对这2种技术制备的铜铬材料的摩擦磨损性能进行了比较研究。

• The tensile, impact, friction and wear properties are studied as the focus.

  重点研究了磨损、摩擦、拉伸、沖击及其结晶性能。

• The friction and wear properties of PTFE and graphite filled PTFE were studied in different loads, lubrications and times, and these properties were analyzed and compared.

  对聚四氟乙烯（PTFE）及石墨填充PTFE复合材料在不同载荷、不同润滑条件下，以及在不同对磨时间内的摩擦磨损性能进行了研究。

• This paper reviews the fabrication techniques as well as the friction and wear properties of the ceramic reinforced copper-matrix composite reported in past years.

  本文综述了近年来关于铜基陶瓷强化复合材料制备技术及摩擦磨损性能研究结果。

• The friction and wear properties and mechanism of three kinds of high polymer slanting wedge materials for frictional damping system of cross-braced bogies were studied.

  对交叉支撑转向架摩擦减振装置所用的三种高分子材料斜楔的摩擦磨损性能及磨损机理进行了研究。

• Flake vermiculite has some good effects on the friction and wear properties of friction composites at high temperatures.

  蛭石片对其增强的摩擦材料的高温状态下的摩擦与磨损有较好的稳定作用。

• The friction and wear properties of IF-3 dry lubricating film under air and vacuum condition were studied and compared with that of the other dry lubricating film in this paper.

  本文介绍了IF-3干膜润滑剂在大气和真空条件下的摩擦磨损性能并与同类型其他于膜相对照。

• The dry sliding friction and wear properties of the coating against YG8B hard alloy were evaluated using a pin-on-disc friction and wear machine.

  利用销-盘式摩擦磨损试验机，以YG8B硬质合金为对磨偶件（盘），评价了涂层的干滑动摩擦磨损性能。

• The mechanical properties of coating base have obvious influences on friction and wear properties of composite coatings.

  镀层基体的性能明显影响复合镀层的摩擦磨损性能。

• The results showed that the concentration of superfine solid particle additives and test temperature and basic oils affect the friction and wear properties of PSZ-GCr15 steel pairs.

  结果表明：超细固体颗粒添加剂的用量、试验温度和基础油都影响陶瓷与钢滑动副的摩擦磨损性能。

• The friction and wear properties of SS-4 dry film and SS-2 dry film in vacuum are evaluated.

  本文报导了SS - 4干膜在真空中的摩擦磨损性能，并与SS - 2干膜的性能作了比较。

• Effects of speed, load, and temperature on friction and wear properties of the composite are described.

  文中介绍了速度、负荷与温度对该材料摩擦磨损性能的影响。

• The effects of counterface and its topography, temperature, PV value, and environment on the friction and wear properties of composites are also discussed.

  讨论了偶件及表面形貌、温度、pv值和环境因素对其摩擦学性能的影响；

• In this paper the friction and wear properties of steel backed-copper base self-lubricating materials and were compared with common 6-6-3 bronze. The worn surface was observed by SEM.

  对研制的三种钢背-铜基自润滑减摩材料进行了干摩擦条件下的摩擦磨损研究，并与常用的减摩材料6-6-3锡青铜作了对比试验，用扫描电子显微镜耐磨面进行了分析。