gas evolution中文,gas evolution的意思,gas evolution翻译及用法

2026-04-13 07:05 浏览次数 16

gas evolution

英[ɡæs ˌi:vəˈlu:ʃən]美[ɡæs ˌɛvəˈluʃən]

[冶] 气体逸出;天然气逸出;气体析出

gas evolution 片语

片语

gas evolution burette气体发生量管

gas content evolution含气量演化

gas-evolution behavior发气特性

oil gas evolution油气演化

gas evolution quantity气体析出置

gas evolution curve气体挥发曲线

Gas Evolution Detection释出气体检测法

gas evolution test气体发生试验

gas evolution method气体发生法

gas evolution 例句

英汉例句

  • the tensile strength, toughness, hardness, constant current corrosion performances and gas evolution behavior were detected and analyzed.

    测试并分析了该合金的强度、塑性、硬度、恒流腐蚀及析气等特性。

  • with the above models, the oil and gas evolution history in a sedimentary basin with complex lithology can be modeled.

    利用这一组模型。可以对既有碳酸盐巖又有碎屑巖的复杂巖性沉积盆地中的油气演化进行模拟。

  • the gas evolution capability of materials used in tube has direct effect to the performance and life of the tube.

    管内材料放气性能的优劣直接影响着整管的性能和寿命。

  • the effect of surface treatment of non silica base sand on the strength, gas evolution and breakdown of precoated sands has been investigated in the present work.

    研究了表面处理工艺对覆膜特种砂强度、发气性及溃散性的影响;

  • the wastewater to be treated flows downwards in the centre and returns upwards along the support elements (40), the current being partially generated by gas evolution from the micro-organisms.

    待处理的废水在中心向下流动,借助于微生物产生气体所部 分产生的流动,该废水再次沿载体组件(40)向上。

  • it was also pointed out that gas evolution test was an important method to estimate the zinc powder quality, but its results was only for reference to the zinc powder manufacturers.

    同时指出,析气量检测是测试锌粉质量好坏的一种重要手段,但析气量检测结果仅能作为锌粉生产厂家的参考依据。

  • mercury free zinc powder for alkaline zn mno 2 batteries is produced by atomizing in n2. a systematical research is carried out into the gas evolution behavior of zinc alloy powder .

    采用氮气雾化法制得堿锰电池用无汞锌粉,考察了各种微量合金元素的浓度对锌粉析气量的影响。

  • the results showed that the discharge capacity of the mh electrode increased slightly when 3% silver was added, but the amount of the gas evolution from the simulated cell was obviously reduced.

    实验表明,在贮氢电极中添加3 %质量分数的银添加剂,电极容量略为增加,且明显降低了模拟电池的析气量。

  • in the gas evolution step, with the axis rotation, the flux through each side of the triangular element is obtained.

    在第②步中,采用旋转坐标轴的方法来计算非结构网格单元各边的通量。

  • the instantaneous gas evolution was detected by ftir and the evolutions of ch4, co2, co and tar were qualitatively analyzed.

    热解气体的逸出情况由ftir进行实时检测,并且定性分析了ch4、co2、co和焦油的析出情况。

  • by comparing the volume of gas evolution under several different charging models, it was verified that fast charge with slow pulse was a kind of low…

    通过几种充电模式充电时析气的对比实验证实慢脉沖快速充电方法是一种低析气量、高效率的快速充电模式。

  • in order to reduce rate of waste products caused by blowhole for ca488 engine aluminum cylinder head casting, the gas evolution of molding materials was studied.

    为降低ca488发动机铝缸盖铸件因气孔造成的废品率,必须对其造型材料的发气性能进行研究。

  • results the technical performances such as curing rate, shock thermal expansion, collapsibility, gas evolution of the new-style sand are obtained, which are well suit for making mold.

    结果指出该种新型自硬砂在硬化速度、流动性、发气性、溃散性和激热膨胀等方面性能良好。

  • the experimental results show that the gas evolution and the remains of complex additive influence the quality of mmcs.

    研究表明:复合剂的发气量、残留物对复合材料的品质产生影响;

  • this article introduces the theory, equipment and method of testing the performance of gas evolution of materials used in tube under high temperature environments.

    本文简介了测试管内材料高温放气性能的原理、装置和方法。

  • with the increase of vacuum rate and permeability, the thermal degraded products of eps remove from the mold cavity more quickly and stay in high temperature area shorter, so gas evolution decreases.

    随着负压度和涂层透气性的增加,eps热解产物能够更快地排出型腔,在高温区停留的时间减少,eps发气量降低。

  • grillo standard out of cell gas evolution test procedure and in cell post partial discharge gas test procedure were discussed.

    叙述了德国格里洛公司电池外锌粉气体发生试验与电池放电后气体发生试验的方法。

  • the decomposition temperature(td), gas evolution and decomposition rate of blowing agents, especial blowing agent h(dinitrosopentamethylenetetramine) in epdm compounds were investigated.

    选用epdm作橡胶介质,重点测试了发泡剂h在epdm胶料中的分解温度、发气量及分解速度等参数。

  • surface imperfections: melt temperature may be too high causing resin decomposition and gas evolution (bubbles).

    外观不完整:塑料熔化温度过高导致树脂分解和气泡。

  • the gas evolution test method has the advantage that the effective coal dust content in green sand can be determined rapidly and accurately.

    发气量试验方法的优点是能够迅速和準确地确定 型砂中有效煤粉的具体含量。

相关热词