gas injection中文,gas injection的意思,gas injection翻译及用法

2026-04-13 07:05 浏览次数 14

gas injection

英[ɡæs inˈdʒekʃən]美[ɡæs ɪnˈdʒɛkʃən]

[油气] 注气;[化工] 煤气喷射

gas injection 片语

片语

gas cap injection气顶注气

gas-injection mechanism注气机理

Gas Assistant Injection Mould气辅成型

Gas assisted injection molding气辅成型模具

Gas direct injection缸内喷气

gas aided injection molding气辅注塑

gas driven injection气动进样

gas-injection extruder注气体挤出机

gas assisted injection moulding气体辅助注射成型

gas injection 例句

英汉例句

  • field tests of gas injection have been carried out in tuha, changqing etc oilfield of our country, and some valuable experience collected.

    我国吐哈、长庆等低渗透油田已开展注气的现场试验,有一些成功的经验。

  • gas injection mechanism in buried hill reservoir has been studied through analyzing the impact of gas on oil pvt.

    通过分析天然气对原油高压物性的影响,研究了古潜山油藏的注气机理。

  • as the increasing of gas injection rate, both the injection and storage capacity of the reservoir will improve further.

    随着注气速度的增加,油藏的注入能力和储气能力将进一步加强。

  • gas injection technology is used to improve oil recovery in tuha oilfield, sensitivity evaluation has been conducted by means of numerical simulation orthogonal experiment method.

    针对吐哈油田注气提高采收率,基于数值模拟手段,运用正交试验法对影响注气效果的因素进行了敏感性评价。

  • the two technical problems faced by the technology of under-balanced horizontal well drilling with gas injection are the down-hole motor and the conventional mwd can't work normally.

    注气欠平衡鉆水平井技术面临的两大技术难题是井下动力鉆具不能正常工作和常规mwd无法正常工作。

  • gas injection velocity has strong effected on oil recovery for non-miscible flooding.

    注气速度对非混相驱的采收率有很大的影响。

  • gas injection has been successfully used to enhance oil recovery in low permeability reservoir at home and abroad.

    注气提高采收率技术在国内外低渗透油藏开发中取得了较好的应用效果。

  • it is set forth that first stable stage of formation pressure is the main response stage in gas injection development.

    阐述了在注气开发中,地层压力第一平稳阶段是注气开发的主要见效阶段;

  • displacing oil and water by gas is very effective, showing gas storage construction in late high water cut stage will have good gas injection and preservation capability.

    天然气驱油和水的效果十分明显,说明高含水后期油藏进行储气库建设,其注气、储气能力较好。

  • enhancing oil recovery by gas injection is an effective technology for oil reservoirs with high water-cut, low permeability, and sensitive water.

    注气提高采收率是高含水油藏、低渗油藏、水敏油藏改善开采效果的有效技术。

  • the general material balance equation was applied widely in the field, but few studies about material balance equation of gas injection flooding has been conducted.

    常规物质平衡方程在油田已广泛应用,然而对油田注气物质平衡方程的研究较少。

  • yaha field is the largest integrated condensate gas field developed by the cyclic gas injection with high pressure.

    牙哈凝析气田是目前全国最大的采用高压循环注气开发的整装凝析气田。

  • a reaction gas injection device injects a reaction gas into an interior of the processing chamber.

    介电窗安装在加工室上。反应气体注入装置将反应气体注入加工室内。

  • the influences of the rheological properties, injection content and delay time of gas injection on material distribution and gas penetration are investigated.

    考察了材料流变性能、注射量和气体注射延迟时间对材料层厚分布及气体在熔体中穿透的影响规律。

  • a type of inert gas injection process that uses foam to control nitrogen mobility and channeling.

    一种利用泡沫控制氮气流度和窜流的惰性气体注入过程。

  • the study shows that reservoir characteristics and fluid property of renqiu buried hill reservoir fit gas injection recovery, and the result of this study may guide field recovery by gas injection.

    研究表明,任丘古潜山油藏的储层特性和流体性质较适合注气开采,其研究成果对现场实施注天然气开采具有指导意义。

  • three-dimensional, three-phase, black-oil mathematical models are established for the gas injection process in a fractured reservoir.

    建立了考虑分子扩散作用的裂缝性油藏注气开采三维三相黑油数学模型。

  • although it too is of some importance to the design of an acid gas injection scheme, it will not be discussed here.

    在设计酸气注入方案时,这个问题也具有一定的重要性,但本文对此问题不进行讨论。

  • based on a thermodynamic model of gas_liquid equilibrium, the variation of phase behavior in a volatile oil system during gas injection has been investigated.

    根据气液两相相平衡热力学模型研究了某挥发油油藏在注天然气过程中油藏体系相态特征的变化规律。

  • gas injection to enhance reservoir recovery has drawn more and more attention, and laboratory study is a very important step for oilfield gas injection.

    注气提高采收率技术已经越来越引起人们的重视,而实验研究工作是研究油田注气开发至关重要的一步。

  • the gas injection control system used for gas assisted injection molding is a small delay and small inertia system.

    气体辅助注射成型机的注气控制系统是一小延迟、小惯性系统。

  • gas injection immiscible displacement has been selected to improve recovery efficiency in wenwu block of tuha oilfield.

    温五区块是吐哈油田利用注气非混相驱提高采收率的试验区块。

  • the phase behavior experiment shows that the hydrocarbon gas injection makes the results of visbreaking and swell of reservoir fluid obvious in gao 13 block.

    注气相行为特征实验表明,注烃气对高13断块油藏流体的降黏、膨胀效果显着。

相关热词