英语释义

1. composition in which the type is cast from molten metal

片语

hot rolled metal热轧金属

hot dip metal coating热浸镀金法

hot t metal detector热金属检测器

Hot Galvanizing Metal Bracket热镀锌金属支架

hot iron铁水；高温熨烫

hot-metal bottle铁水罐

desulphurizing hot-metal脱硫铁水

hot-metal car铁水车

hot-metal mixer熔铁混合器

英汉例句

• the microstructure evolution, which is governed by temperature, strain and strain rate during hot metal forming, is a key factor to the mechanical properties.

  金属在热成形过程中的微观组织演变是影响产品力学性能的关键因素，该演变过程取决于温度、应变和应变速率。

• most rolling operations are performed on hot metal but there are also cold rolling operations.

  大部分的轧辗作业都用于加热的金属，但也有采用冷轧的方式。

• in order to keep 300t hot metal car being safe during transportation, the car dynamic behaviors are studied.

  为保证300 t铁水车的安全运输，采用刚-柔混合动力学模型研究了该车的动力学性能。

• a piece of hot metal sufficient to slightly overfill the die shape is placed in the bottom die, and the top die is forced against it, so that the metal takes the internal shape of the die.

  将一块大小足以充填模腔并能稍有溢出的加热金属放入底模，并将顶模加压合拢，这块金属便获得该模腔的形状。

• high-speed plasma arc cutting technology plasma engineering hot metal cutting, and partial melting with high flow will also be the molten metal blow, form a narrow incision.

  血浆高速等离子弧切割技术工程热金属削减部分熔融，并与高流量同样会被熔化的金属吹走，形成一个狭窄的切口。

• it includes a huge heat-treatment furnace, a crane that lifts hot metal plates without damaging them, and a computer system that can manage the complete flow of work.

  这套设备包括一个巨型的热处理炉，一架可以起吊热的金属板而不至于损坏它们的吊车和一套能控制整个工艺流程的计算机系统。

• one of the girls had a deep wound to her head and her brain was exposed, and the second had deep wounds where the hot metal had cut her abdomen and legs.

  我曾参与的一个接送任务，两个7岁的女孩被炸弹炸伤，第一个女孩头部有一个很深的伤口，她的大脑脑髓暴露在外，第二个女孩被弹片割破了腹部和腿部，留下了很深的伤口。

• aiming at decreasing the fluoride and sodium content of processing flux in baoshan iron and steel co, the dephosphorization and desulfurization experiment during hot metal pretreatment was performed.

  宝钢预处理熔剂中氟含量和钠含量较高，为此在实验室进行了铁水预处理脱磷、脱硫实验。

• the bf liners were damaged seriously under the influence of hot metal melting , chemical corrosion of slag and accretion in the middle and later term.

  由于铁水熔融金属以及炉渣的化学侵蚀和炉瘤的影响，高炉中后期炉衬受损严重。

• this paper fully and accurately introduces all kinds of questions , which influence the safe running of hot metal cars, and puts forth corresponding protective measures.

  针对铁水车运行中出现的种种影响运行安全问题，研究实施各种防护方案，取得了很好的效果。

• hot metal silicon content in blast furnace is a main parameter by which product quality is measured and energy utilization ratio of blast furnace is reflected.

  高炉铁水中的硅含量不仅是衡量产品质量的一个重要指标，而且反映了高炉能量利用的好坏。

• smaller slag volume in steelmaking with hot metal containing low silicon will benefit to reduce the consumption of lime and increase metal yield.

  低硅铁水炼钢可以实现少渣炼钢，有利于减少石灰消耗和提高金属收得率。

• she still works with physical and occupational therapists, who help stretch her delicate hands, devastatingly seared on tower one's hot metal lobby doors.

  劳伦现在还需要配合医师和理疗师对她的治疗。她的手是被一号塔大堂金属门要命的高温灼伤的，现在非常细弱，需要慢慢拉伸。

• the problem: whisper-thin traces of air gradually put the brakes on objects in low earth orbit and create earthbound showers of hot metal bits.

  虽然地球上方的空气在一定程度上阻止了那些位于低地球轨道上的太空垃圾高速撞向地球上，但由于相互摩擦也制造出不少洒向地球的金属碎片。

• for hot metal desulphurization by powder injection, mixing time, residence time and powder penetration ratio are the three basic parameters which determine desulphurization efficiency in ladle.

  熔池均混时间、粉剂穿透比和粉剂停留时间是决定铁水包喷粉脱硫效率的三个基本参数。

• the technology of hot metal desulphurization with granulated magnesium in ladle at xiangtan iron and steel group co.

  介绍了湘钢二炼钢铁水罐喷吹颗粒镁脱硫工艺，对镁脱硫效果及关键指标进行了对比分析。

• the hot metal contracts as it cools down.

  热的金属一冷下来就收缩。

• the hot metal pretreatment of injecting and mechanical stirring are analyzed, then the 「kr」 hot metal pretreatment is confirmed to use.

  通过对喷吹法和机械搅拌法铁水预处理工艺进行分析，确定选用kr法铁水预处理工艺。