英语释义

1. a groove or channel for a key

2. the aperture for the key in a lock having a flat metal key

片语

keyway detail键沟

fit keyway配合键槽

KWY Keyway键沟

hub keyway轮毂键槽

key slot[机] 键槽

keyway gage键槽规

keyway tool[机]

KWY键槽

machining keyway键槽加工

gear keyway齿轮键槽

profiled keyway成形键槽

英汉例句

• the paper prov rides a practical method of measuring and assessing the symmetrical error of the keyway in production and data processing formula.

  本文提供了生产中实用的键槽对称度误差检测方法和数据处理公式。

• this is a presentation of the keyway installation of the rudder processing and for the processing and design of the keyway dedicated machine.

  本文研究了该舵装置键槽的加工工艺以及为加工键槽而设计的专用机床。

• it doesn't work to set a keyway to decrease the displacement in the floor plate and it is similar with the straight seam condition. so there is no obvious regularity between the differences in both.

  底板块设键槽并没有起到降低底板块位移的作用，其与直缝情况基本相同，两者之间的差别没有明显的规律性；

• milling cutter series: straight shank milling cutter, straight shank keyway milling cutter, prick milling cutter, nonstandard milling cutter.

  铣刀系列：直柄铣刀、直柄键槽铣刀、锥度铣刀以及其它非标铣刀。

• when the keyway covering member is in the covering orientation, a covering portion of the keyway covering member aligns with the keyway to cover the keyway.

  当该钥孔覆盖部件位于该覆盖方位中时，该钥孔覆盖部件的覆盖部分与该钥孔相对準以覆 盖该钥孔。

• in this photo the keyway has been considerably widened and gouged so a tool can be inserted, probably a screwdriver or chisel.

  在图片中，匙路被相当严重的被挖凿和变宽，所以所使用的工具有可能是螺丝刀或凿子。

• jaws: hardened alloy steel with lubrication, keyway slot for tooling location, 32 degree jaw motion each jaw travels 1 degree beyond center.

  大白鲨：硬化合金钢与润滑，键槽插槽工具的位置，32度下颌运动每超出1颚旅游中心的程度。

• features free-spinning keyway to prevent wrench attacks, but easy to turn when correct code is entered.

  功能特点免费纺键槽，以防止扳手对锁面的破坏，但拥有正确的代码，进入屋子是十分的方便。

• an old long lathe is changed to lj8510/cgl type keyway broaching machine.

  利用旧车床改装成lj8510/cgl型键槽拉床，符合绿色制造减小回收成本的要求。

• the design, manufacture and assembly of a high precise jig for machining keyway are introduced.

  介绍了一种高精度键槽加工夹具的设计、制造及安装方法。

• in this paper the method of processing female keyway in large scale structure by assembling a work holder on the c630 lathe and the designing of the work holder are introduced.

  介绍一种在车床上用工装铣削大型结构件孔内键槽的加工方法，并介绍该工装的设计。

• the movement of the pick through the keyway also leaves forensic evidence in several places.

  单钩在匙路活动时也会在不同的地方留下痕迹证据。

• improvement is made to the positioning feller gauge in flywheel keyway broaching machine by v-type auto center align.

  利用v型块自动对中定位原理，对飞轮键槽拉床定位塞尺进行改进。

• a lock assembly includes a lock body and a keyway covering member.

  一种锁具组件包括锁具本体和钥孔覆盖部件。

• given the lack of measurement to degree of symmetry to keyway centre, the paper designed the new measure.

  针对目前键槽对称度测量的不足，设计了一种结构简单、操作方便的外圆键槽对称度测量器。

• in all fiberbench coupling systems using ofr pm fibercables, both the fast axis and the fc receptacle keyway are vertical.

  所有的光纤工作台耦合系统都使用ofrpm 光纤电缆，快轴和fc容器键槽都是竖直的。

• keyway slot for tooling location.

  键槽插槽工具的位置。

• subsequently this thesis narrated in detailed the method that sketched the axis main body and the keyway and created the features of revolve, chamfer and extrude.

  根据自动建模的程序流程，实现了轴主体部分和键槽特征的草绘、轴主体部分旋转成型以及键槽特征的拉伸成型。

• lastly during assembly care is taken to avoid damaging the seals when passing over the keyway or performing bearing surfaces of the shaft.

  最后，在组装过程中，当部件通过键槽时，注意避免损坏密封和轴的轴颈表面。

• pointing to the accuracy requirement of the keyway on shifts, this paper presents a special jig and a cutter positioning method.

  针对轴类零件键槽精度的要求，介绍了一种专用夹具及对刀方法。

• the new method for machining keyway in holes and the special tool is presented, with which the keyway not only in blind holes but also in shoulder holes can be machined.

  介绍了一种加工孔内键槽的新方法和相应的专用工具。不但可用来加工通孔内的键槽，而且还能用来加工盲孔内的键槽或有障碍台肩的孔内键槽等。

• the more and concentrate stress in the keyway are produced, however, this condition does not occur in the straight seam way. both of them meet the stress requirements.

  带键槽底板块在键槽处产生较大应力集中，而直缝情况则没有产生较大应力集中，两者均满足应力要求。

• input keyway thickness excluding taper.

  输入键沟的厚度（不包括锥度）。

• the stress in floor plate with keyway are more than it with straight seam under the same level of uplift pressure.

  同级扬压力作用下，带键槽底板块的应力大于直缝底板块的应力；

• the unique locking bar system prevents the key on the output shaft from tipping in the keyway, eliminating the possibility for key and keyway damage that results in a loss of productivity.

  独特的锁闭桿系统，防止输出轴上的键在键槽倾斜，消除了键和键槽损害的可能性及其可能会导致的生产力损失。

• this paper discusses the cause of keyway symmetry error produced and test method and approaches to related calculating formulae.

  论述了键槽对称度误差的产生原因以及检测方法，并对有关计算公式进行了探讨。