片语

single layer film thickness单层膜厚

Layer r Thickness Measurement薄膜厚度分析

layer s thickness层厚度

compressed layer s thickness压缩层厚度

boundary layer momentum thickness边界层动量厚度

layer r thickness meter镀层测厚仪

Boundary Layer Displacement Thickness边界层排挤厚度

layer r thickness gauge膜层测厚仪

英汉例句

• The control of layer thickness by changing energy input. When the powder feed conditions were constant, the layer thickness was increasing with the increase oftemperature of melt pool.

  改变能量输入的层厚控制：送粉条件不变时，熔覆层厚度随熔池温度的增加而增加，通过控制激光功率或扫描速度可以实现熔覆层厚度的反馈控制。

• On the basis of this calculation, the impact of the SiO2 buffer layer thickness on the characteristic impedance and dielectric constant in the modulator with a ridge structure is obtained.

  在此基础上得出了脊波导结构调制器中缓沖层厚度对特征阻抗和有效介电常数的影响特性。

• This paper gives out a new method of homomorphic signal processing according to the accuracy requirement of layer thickness measurement.

  本文针对精确测量薄层厚度的要求。提出了一种新的同态信号处理方法。

• The invention provides a rolling method for improving the outer layer thickness distribution of a composite plate, which belongs to the technical field of metal plastic processing and molding.

  本发明提供一种改善复合板内外层厚度分布的轧制方法，属于金属塑性加工成型技术领域。

• The weathering layer thickness thickens with the increase of dumping years.

  风化层厚度随排矸年限的增加而加大。

• Secondly , protective layer thickness is too thin to protect concrete reinforced bar and reduce durability.

  保护层厚度不够导致钢筋外露引起锈蚀，降低了桥梁的耐久性；

• From this feature, a new and simple graphical method is proposed to determine the dust layer thickness at the back corona spark point.

  从而提出了用伏安特性曲线确定粉尘层反电晕击穿厚度的简易图解法。

• Three main factors, layer thickness fluctuation, interfacial roughness and interdiffusion of non-ideal soft X-ray optical multilayers were characterized quantitatively.

  三个主要因素，非理想的软x射线光学多层膜的界面粗糙度和相互扩散层的厚度波动，定量的特点。

• The analysis result of velocity distribution and boundary layer thickness is put forward in the boundary layer and cored region for laminar and turbulent flow of pipeline.

  采用动量积分方法推出了管道流动中的速度边界层方程，给出了管道层流和紊流时速度边界层和核心区中的速度分布、边界层厚度的解析结果，并与冯。

• This method can greatly decrease the boundary layer thickness on the floor, and maintain good characteristics and uniformity of the flow field.

  这种方法使地板边界层厚度大大降低，而风洞仍保持好的流场品质及流场较均匀的特点。

• Experimental results show that higher efficiency can be accomplished and bigger layer thickness and bigger servo feed rate can be chosen in UED-Milling in gas with the aid of ultrasonic vibration.

  实验表明，施加超声振动不仅可以提高铣削加工的材料去除率，还可以较大的分层厚度和伺服进给速度进行加工。

• During operation of the rolling mill, the layer thickness sensor records the value for the layer thickness of the treated viscous mass on the roller.

  在辊轧机工作期间，层厚度传感器记录辊子上的被处理的粘性物质的层厚度的值。

• With the increase of coating layer thickness and the decrease of permeability, the peak values and time increase.

  涂层厚度增加、透气性下降，则传输曲线峰值增加，时间延长。

• There are mainly two methods to determine compressed layer thickness in calculating foundation settlements, control strain method and control stress method.

  地基沉降计算中压缩层厚度确定方法主要有应变控制法和应力控制法两种。

• The residual resistance factors and the depleted layer thickness of Xanthan solution decrease with injection speed increase, but recovery does not vary much.

  注入速率增加时，黄原胶溶液的残余阻力系数下降，衰竭层厚度降低，采收率变化不大。

• This system can still apply extensively in the automatic detection of channel, river, reservoir and lakes ice layer thickness change.

  该系统还可广泛应用于渠道、河流、水库和湖泊冰层厚度变化的自动检测中。

• It was indicated by test results that satisfactory joints could be obtained, provided the titanized layer thickness was sufficient and the brazing variables were suitable.

  试验结果表明，只要渗钛层厚度足够，钎焊工艺参数选配适当，即可获得满意的钎焊接头。

• Preset layer thickness and laser scanning speed have definitive matching relation to the content of amorphous in the coatings, respectively;

  预置涂层厚度及扫描速度分别与涂层中非晶含量存在着一定的匹配关系；