oil layer
[油脂] 油层;含油地层;含油层;[机] 油膜
2026-03-21 23:21 浏览次数 22
[油脂] 油层;含油地层;含油层;[机] 油膜
oil source layer油源层
thick oil-layer厚油层
oil-layer distribution
Not only the oil and gas layer, but also the lateral distribution of it can be detected by synthetically analyzing P-wave section, PS-wave section and the layer distribution.
油水层
oil horizon含油层;井中油柱高度
Putaohua oil bearing layer葡萄花油层
[机] 油膜
oil gas layer油气层
oil l layer含油层
oil bearing layer classification油层分类
heavy oil tested layer稠油层
a bearing model for investigating the mechanism and form of bearing current is proposed, which simulates the bearing interior contact and oil layer breakdown.
为研究轴承电流产生机理及存在形式,建立模拟轴承内部接触和轴承油层击穿的轴承模型。
after the aqueous extraction of oil from small walnut, the slurry which was separated from the top oil layer contain a great deal of protein.
水剂法取油后的小核桃浆液中含有大量的蛋白质,为使该蛋白质得到充分利用,试验研究了小核桃蛋白的基本性质及其清乳液的制备工艺。
in order to avoid change without expectation. we should do some compatibility experiments about well fluid , the oil layer, the crude oil and the oil layer water.
防止油层伤害最基本的方法是做入井流体与油层、原油、油层水配伍性实验,避免油层发生不期望的变化。
using this method may allow reservoir fluid viscosity to be decreased, oil layer permeability to be increased, residual oil saturation to be lowered, thus the oil production to be rise.
指出,人工地震可降低储集层中原油的粘度,提高油层渗透率,提高原油流动性,从而提高原油产量;
so, the necessity of oil layer re-classification in lasaxing oilfields at high water cut stage is discussed in this paper.
在其后几十年的开发过程中,一直沿用早期的分类标準,在一定时期满足了油田开发的需要。
when salty mud intrudes into the layer, the reduction of water layer is small, but the reduction of oil layer is great. this will form a low resistivity oil layer.
盐水泥浆侵入时,水层电阻率降低较小而油层电阻率大为降低,因此形成低阻油层。
the faults that straightly extending to heidimiao oil layer is the main passage of gas transfer, and the natural gas collection is close related to the distribution of fault.
一直延伸到黑帝庙油层的断层是天然气运移的主要通道,天然气的聚集成藏与断层分布关系密切。
in the paper, the performance of the modified emulsified bitumen used as penetrated oil layer is discussed by its application to the beijing-zhangjiakou expressway.
通过对京张高速公路路面施工中以改性乳化沥青作为透层油的工程应用,结合实践对其作用进行探讨。
sp logging is one of logging methods which van effectively distinguish resistivity of mixed liquid in formation after oil layer being water flooding.
自然电位测井是油层水淹后能够有效识别地层混合液电阻率信息的测井方法。
the hydraulic vibration oil layer treatment method is researched, because the bridging near hole bot-orn in the oil layers seriously affects the oil production.
针对油层近井底地带堵塞、严重影响油井产量的问题,研发了水力振动法处理油层技术。
deng 2 well is in ridge fault-block reservoir with it「s oil layer in the sandstone of yuzhuang formation fluvial facies and the location in the top of houdeng structure.
邓2井含油构造,油层为余庄组的河流相砂巖,位置处于后邓构造顶部,油藏为屋脊断块构造类型。
as unqualified water and the movement and expansion of the oil layer clay jam the hole and larynx, the oil layer」s pervasion resistance increases.
由于注入水质不合格以及油层粘土的运移膨胀堵塞了孔喉致使油层的渗流阻力增加。
the recognition and evaluation of low resistivity oil layer is worldwide problem.
低阻油层的识别、评价与熟悉是世界性的困难。
high formation water salinity reduces resistivity contrast between oil layer and water layer.
高矿化度的地层水,降低了油层与水层的电阻率对比度。
therefore, it is very difficult to distinguish oil with water layer and to evaluate oil layer by using logging data.
采用人工神经网络测井识别技术识别油层并进行储层物性及含油性的解释。
sp logging is one of logging methods which can effectively distinguish resistivity of mixed liquid in formation after oil layer being water flooding.
自然电位测井是油层水淹后能够有效识别地层混合液电阻率信息的测井方法。
a new tubing anchor, which has the function of oil layer protection, is developed according to the requirement of oil field production.
该油管锚主要由油层保护机构、坐卡机构及解卡泄油机构等组成。
light sent into the oil layer was confined there, bouncing between the metal and air boundaries. the beam spread out ever more quickly, generating a trumpet-shaped glow (see image).
当把光传入油层后,就被约束在那里,光线在金属和空气的边界之间不断反弹,于是产生了喇叭状的辉光(见图片)。
with improved bp network, adopting deep, short resistivity, and acoustic logging, the model to recognize oil layer and water flooded layer is established.
利用改进的bp算法,采用深、浅侧向电阻率、声波时差测井建立了油层、水淹层的识别模型。
for the light to be trapped in two dimensions, the object's surface needed to be smooth enough to cleanly reflect most of the light into the oil layer rather than scattering it at all angles.
要把光被捕获在两维的曲线状表面上时,要求物体表面非常平滑,才足以把大部分光线干凈利落地反射进油层而不是分散在所有的各个角度上。