英语释义

1. having the longer axis more or less vertical — compare plagiotropic

2. being, having, or relating to properties (such as strength, stiffness, and elasticity) that are symmetric about two or three mutually perpendicular planes
a piece of straight-grained wood is an orthotropic material

3. designed so that the roadway serves as an orthotropic structural member constructed with a steel-plate deck as an integral part of the support structure

片语

rhombic菱形的；斜方形的；正交的

orthotropic parameter正交各向异性参数

orthotropic composite正交各向异性复合材料

orthotropic hardening正交异性硬化

orthotropic facing正交各向异性表层

orthotropic facings正交各向异性表层

atropous萎缩的，直生的

orthotropic damage正交各向异性损伤

orthotropic decomposition正交分解

Orthotropic Slabs正交异性板

orthotropic rocks正交各向异性体

英汉例句

• due analysis has been made and it is found that the nonlinear energy release rate of orthotropic plate with a, crack is dependent on the biaxial load factor.

  本文分析双向加载下正交异性裂纹板的非线性能量率，指出所研究的裂纹板的非线性能量释放率与双向加载因子有关。

• the theory of j integral near cack tip in the plate of linear elastic orthotropic composite material are systematically studied in this paper.

  本文对线弹性正交异性复合材料单层板裂纹尖端附近的j积分进行了系统的理论研究。

• the orthotropic properties of the corrugated steel culvert and the coupling between the culvert and the foundation are considered in the analysis.

  在分析中，考虑了波纹钢板的正交各向异性材料特性和地基管涵结构的耦合作用。

• this paper solves problems of geometrically nonlinear bending of very flat and thin orthotropic shell under transverse load with least square method of collocation.

  本文用最小二乘配置法求解正交异性极扁薄壳承受横向载荷作用下几何非线性弯曲问题。

• on the basis of the author's former paper, in this paper the forced vibrations of rectangular orthotropic plates taking into account the shear deformation and rotatory inertia are discussed.

  本文是作者在上一篇文章的基础上进一步讨论了矩形正交异性板在虑及剪切变形和剖面转动惯量影响下的强迫振动。

• based on patran/nastran and a combination of direct search method and orthotropic experiment method, an effective optimization system was established.

  在patran/nastran的基础上，采用直接搜索法与正交试验法相结合的优化方法，建立了一套实用的优化系统。

• basing on three-dimension elasticity and giving up any assumptions, the authors obtain the state equations for the orthotropic body.

  本文从三维弹性力学出发，抛弃任何假设，导出正变异性体的弹性力学问题的状态方程。

• with greater width, the stiffening plate on a large span steel bridge is usually of the orthotropic type.

  大跨度钢桥加劲板件由于板件幅面较大，一般采用正交异性加劲板件。

• an orthotropic anisotropic elastic damage model has been proposed, and the elastic deformation, damage deformation and other irreversible deformation can be identified respectively.

  提出一种正交损伤模型，该模型能分别描述巖石材料的弹性变形、损伤变形和其他不可逆变形能。

• the effects of rock characteristics on the propagation of explosion stress wave are studied and the blast action and the crack effects in the orthotropic rock are analysed through fractal principle.

  应用分形理论，研究了巖石（体）性质对爆炸应力波传播的影响，分析了正交异性巖石（体）内的爆破作用及破裂效果。

• orthotropic shallow cylindrical shells with large deflection are theoretically calculated and experimentally analyzed under the cations of uniform and concentrated loads.

  对正交异性扁薄圆柱壳在均布载荷及集中载荷作用下的大挠度问题进行了理论计算和测量。

• high-speed schardin photography and optical caustics method are introduced to study dynamic stress singularities of mode-i crack tip in orthotropic composites under impact.

  利用高速摄影技术与光学焦散线技术相结合，对沖击下正交复合材料i型裂纹尖端的动态应力集中问题进行了光测力学实验研究。

• there are mainly three methods in the second system stress analysis of the orthotropic steel deck, p-e method, the equivalent girder beam method and the fem .

  薄壁钢扁平箱梁正交异性板钢桥面系第二体系应力的计算方法主要有p-e法、等效格子梁法和有限元法等。

• in this paper, the strength, stiffness and buckling of large frp conducting wind channel in cooling tower are analyzed using orthotropic shell theory.

  用正交各向异性壳体理论，对大型逆流式冷却塔的玻璃钢导风筒进行了强度、刚度和稳定性分析。

• the proposed algorithm is used to identify the material parameters of orthotropic plate with a circular hole.

  然后采用本文提出的方法识别正交各向异性圆孔方板的材料参数。

• the element, possessing five degrees of freedom per node, is suited for linear, nonlinear and nonlinear stability finite element analysis of isotropic, orthotropic and laminated plates and shells.

  该单元每个节点有五个自由度，适用于各向同性、正交异性和层合板壳的线性、非线性及稳定性有限元分析。

• a combined method of experiment boundary element is suggested for stress analysis in photo orthotropic elasticity, and a corresponding program system bemsc is developed.

  本文建立了正交异性光弹性应力分析的实验边界元混合解法并编制了相应的程序系统be-msc。

• the important parameters that influence the mechanical property of the paving layer on an orthotropic steel bridge deck are the paving layer thickness and modulus of the asphalt concrete surfacing.

  影响正交异性钢桥面铺装层力学性能的重要参数有铺装层的厚度和沥青混凝土铺装层的模量。

• the stress intensity factors of both orthotropic and isotropic materials can be obtained from the present results.

  正交各向异性和各向同性材料的应力强度因子均为本文的特例。

• the nonlinear finite element analysis was applied to study the stress and modal of an air spring, which is composed of composites with multiple orthotropic materials.

  运用非线性有限元分析技术，对由多层正交各向异性复合材料组成的某型空气弹簧进行了应力和模态分析。

• for the plane stress problem of fixed end orthotropic beams subjected to uniform load, the analytical solutions of stress and displacement were resolved.

  针对均布载荷作用下正交各向异性梁在两端固支条件下的平面应力问题，求解了应力和位移的解析解。

• the orthotropic composites suitable for the study of dynamic photoelasticity are investigated and the method for determining the residual birefringence in the materials is described in this paper.

  文章对适用于动态研究的正交异性光弹性复合材料进行了分析，详细说明了光弹性复合材料中残余双折射的确定方法；

• based on the boundary element method, an inverse method is developed to identify the material parameters of orthotropic plane problem.

  以边界元计算为基础，提出正交各向异性平面问题材料参数识别的反分析方法。

• in this article, the fracture analysis on mode i crack of orthotropic functionally gradient materials is studied, under which the elastic constants changed exponentially along thickness of the plate.

  文章对含i型裂纹的正交各向异性功能梯度材料板沿其板厚的弹性常数表达式呈指数函数变化时的应力-应变场进行分析。

• in this method , the arch roof with corrugations is equivalent to orthotropic shells , and the equivalent elastic coefficients are determined by simplified calculating formula.

  在该方法中，将带波纹的拱板等效成正交各向异性壳，板壳的等效弹性常数由简化计算公式确定。

• an example of stress analysis is given in photo orthotropic elasticity.

  最后对正交异性对径受压圆盘进行了光弹性应力实例分析。

• based on the analytical solution to stress field around a hole in a stressed orthotropic infinite width plate, a set of equations was derived to calculate the relieved strain matrix.

  以正交各向异性无限大板孔边应力场解析解为基础，导出了释放应变矩阵计算表达式，并用一个算例验证了该计算式的正确性。