英语释义

1. to heat (something) again to make (something) hot or warm once more
reheating leftovers in the microwave

2. to make (cooked food that has become cool) hot again

片语

steel reheating烧钢

reheating boiler（中间）再热锅炉；重热锅炉

chemical reheating化学升温

reheating apparatus重热器

reheating condition加力状态

reheating g重新加热

reheating schedule加热制度

double reheating两级再热

reheating furnace[冶] 再热炉

gas reheating气体再热

英汉例句

• at present, the chain grates have been extensively applied to medium-and small-size coal-fired reheating furnace, and good effects achieved.

  目前，链式炉排已广泛地应用于中小型燃煤加热炉，并取得了可喜的成果。

• the design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.

  本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。

• this paper introduces two transformations for perfecting chain grate reheating furnace and the effects of automatically firing steel.

  本文介绍了锡兴钢铁公司，为完善链式炉排加热炉所做的二次改造和实现自动烧钢的做法及效果。

• change that by placing an ice cube in the center of the rice and then wrapping the top with plastic wrap, with a few punctures of course, before reheating it.

  改变一下吧，在米饭中间放一块冰块，然后盖上保鲜膜，当然，加热之前还要在保鲜膜上戳几个孔。

• slabs are heated in reheating furnaces and rolled to the required thickness in hot-rolling mills. the final product is flat steel in coils and thick plates.

  将板坯置入加热炉内加热，并在碾轧机上轧成所需的厚度。最终产物是介于线圈和厚板之间的产品-扁平钢板。

• the thixo-formability of a magnesium alloy az91d and the defect formation were studied with different processing parameters including reheating temperature, time and die temperature.

  研究了不同成形工艺参数，如坯料加热温度、加热时间和模具预热温度（模具温度）对az91d镁合金触变成形性与缺陷形成的影响。

• has deep knowledge of aluminum industry furnace , such as automobile compound industry casting melters , reheating and melting furnaces for al slab process.

  对铝加工行业的工业炉有深刻的知识，有在铝汽车零部件铸造的熔化炉，铝加工行业加热炉，熔化炉工作的经验。

• the thermal status model is established according to a certain walking beam reheating industrial furnace and the flow field, combustion and heat transfer condition in the furnace are simulated.

  本文通过对轧钢步进梁式加热炉内热工状态建模，并对炉内流体流动、燃烧化学反应、传热过程进行了模拟仿真。

• this paper presents a tactics of computer control of reheating furnace with coal powder. with this tactics, fuel savings are maximized and heating quality is improved.

  开发了煤粉加热炉计算机控制策略，该策略不仅能最大程度地节能，而且保证了出钢温度的準确控制。

• the heat flux to slab surface of a walking beam reheating furnace along length of the furnace is computed, and total heat exchange factor is also calculated.

  以某轧钢厂的一台步进梁式加热炉为例，计算了钢坯表面热流沿炉长方向的分布，并反算求解总括热吸收率。

• the movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.

  讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。

• you might need to add a couple more minutes, but it「s better than having to waste energy by reheating an oven multiple times.

  您可能需要多用上点时间，但这好过您使用多次而浪费更多的能源。

• as the quality of coal used in coal-fired reheating furnace at hot rolling strip shop is unstable, at the surface of strip steel rolled the red spot inclusions are produced easily.

  在热轧带钢车间的燃煤加热炉上由于受到煤质的影响，轧后带钢表面容易产生红斑夹杂。

• softness formula s~*=kd/t was employed to describe the reheating state of the semisolid al-si alloy using some parameters, including the penetrated depth, penetrated time and load acting on the probe.

  通过探头浸入坯料深度、浸入坯料时间以及作用在探头上的载荷等参数表征量化了半固态合金坯料在二次加热过程中的「软度」，即二次加热状态。

• by reheating 「stem cooker」 meat becomes more tender and tasty while soup and other dishes become more delicious.

  用「原味锅」再次加热，可使食物肉质保持香纯美味、好汤好菜更加美味可口。

• the reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.

  再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟蹤操作记录，同时通过冶金模型进行生产过程优化。

• this artical has summed up the design and producting of reheating furnace using blast furnace gas, provided an effective way to develop and use this technology to furnace.

  本文在总结高炉煤气加热炉设计、生产的基础上，提出进一步利用这一重大科技成果的有效方法。

• the structures and thermotechnical characteristics of reheating furnace heads of the traditional, useless-space reduced and short-landslide types are discussed.

  论述了端出料轧钢加热炉「传统」炉头、「少閑区」炉头、「短滑坡」炉头的构造及其在热工方面的特性。

• the requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.

  介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。

• the results show that reheating the az91d magnesium alloy extruded by an equal channel die is a kind of good method of preparing az91d magnesium alloy billets.

  结果表明：等径道角挤压后二次加热等温处理是一种适于az91d镁合金的制坯方法，加热温度对坯料的组织有很大影响。

• reheating state and thixotropic behavior of semisolid hypoeutectic al-si alloy were investigated by the penetration method.

  采用浸入法研究了半固态亚共晶铝硅合金的二次加热状态及其触变性能。

• but don」t forget, reheating rice can lead to food poisoning.

  但不要忘记，重复加热米饭可能导致食物中毒。