英语释义

1. a furnace used in steel making in which bars are reheated before being rolled

片语

reheating furnace process model加热炉过程模型

ladle reheating furnace钢包加热炉

digital reheating furnace数字化加热炉

pusher type reheating furnace推送加热炉

reheating in furnace回炉再烧

regeneration reheating furnace蓄热式加热炉

The Reheating furnace加热炉

refractories for reheating furnace加热炉用耐火材料

rotary reheating furnace环形加热炉

英汉例句

• The technological process of metallurgical reheating furnace is analyzed and the temperature distribution model of slab in reheating furnace is presented by applying the theory of heat transfer.

  该文分析了冶金加热炉的工艺流程，利用传热学理论建立了加热炉内钢坯温度分布模型；

• The service life of the reheating furnace has been prolonged when it was used.

  通过在轧钢加热炉上的喷补实践，较大地延长了加热炉的使用寿命。

• Mathematical Model for delay process of a reheating furnace is studied in this paper.

  本文对加热炉待轧过程进行了数学模型的研究。

• The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.

  介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。

• The present situation and several heat insulation structures of the water-cooled skid and post lining in the reheating furnace at Baosteel are introduced.

  介绍加热炉水冷梁、立柱包扎耐材的使用现状和几种隔热结构形式。

• The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.

  本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。

• The blast furnace gas as fuel of high temperature reheating furnace is an important technology for energy-saving and environmental protection.

  高炉煤气作为高温加热炉单一燃料是节约能源和改善环保的重要技术措施。

• The thermal states of the steel workpieces heated in a reheating furnace are used to optimize the control of the furnace.

  主要讨论如何基于工件 （钢锭、钢坯等 ）的热状态来进行均热炉的优化控制 。

• This paper introduces the plan, equipment and effects of utilizing waste heat of flue gases of reheating furnace for second heating of heavy oil to improve the combustion conditions.

  本文介绍了利用加热炉烟气余热对重油实现二次加热以改善燃烧状况的方案，装置和效果。

• Modern rolling mills are developing to be continuous, large-scale, fast produce, high quality, which deliver a higher demand for the research of reheating furnace modeling and optimal control.

  特别是随着现代化轧机向连续、大型、高速、高精度和多品种方向发展，对冶金加热炉的模型研究和优化控制提出了越来越高的要求。

• As the quality of coal used in coal-fired reheating furnace at hot rolling strip shop is unstable, at the surface of strip steel rolled the red spot inclusions are produced easily.

  在热轧带钢车间的燃煤加热炉上由于受到煤质的影响，轧后带钢表面容易产生红斑夹杂。

• In the meantime the author makes an assessment of the operation of the reheating furnace in order to provide the decisive evidence for optimization and improvement of the reheating furnace.

  对加热炉运行状况进行评价，为加热炉的优化改造提供决策依据。

• Information of the rolling process can be feed back to the reheating process, and the temperature setting of reheating furnace can be adjusted dynamically based on the rolling information.

  实现了将轧制生产的过程参数信息反馈到加热生产工序，对加热炉炉温设定进行基于轧制参数信息的动态调节。

• This artical has summed up the design and producting of reheating furnace using blast furnace gas, provided an effective way to develop and use this technology to furnace.

  本文在总结高炉煤气加热炉设计、生产的基础上，提出进一步利用这一重大科技成果的有效方法。

• Through the analysis and comparison of reheating furnace energy consumption, it was shown that the reheating furnace had greater energy saving potential.

  通过加热炉能耗分析和对比表明，加热炉具有较大的节能潜力。

• Based on the detail about the Characteristics of regenerative combustion, by the coal of the high temperature gasifying furnace, the regenerative reheating furnace is designed.

  本文在详细分析蓄热式燃烧技术的基础上，利用高温气化炉产生的煤气，对蓄热式高温炉进行了设计。

• The principal aspects and effects of reconstruction and operation improvement of the reheating furnace at Yingkou Plate Mill are discussed.

  论述了营口中板厂加热炉结构改造和操作改进的基本内容和效果。

• This paper introduces the principle and application of the exchanger to the reheating furnace of steel rolling plant.

  本文介绍了热管的工作原理，以及热管换热器在本厂轧钢加热炉上的应用效果。

• This paper introduces two transformations for perfecting chain grate reheating furnace and the effects of automatically firing steel.

  本文介绍了锡兴钢铁公司，为完善链式炉排加热炉所做的二次改造和实现自动烧钢的做法及效果。

• Thistechnology can be widely applied to rolling mill reheating furnace and should be greatly promoted.

  该技术在轧钢加热炉上有广泛的应用和推广价值。

• As the main process equipment in metallurgy enterprise, the strategy of automatic control of reheating furnace is one of the most important research topics in the field of related process control.

  加热炉是冶金企业主要的过程设备，其自动控制策略是过程控制领域内的一个重要的研究方向。

• By the industrial experiment, the distribution of continuous casting billet preheating temperature is measured, and the economic load range of reheating furnace is established.

  在工业生产条件下测量了铸坯加热温度分布，工业试验确定了加热炉经济负荷运行区。