英语释义

1. to machine (work) approximately to size usually by taking heavy cuts with the object chiefly of removing excess metal rather than of obtaining a correct size and finish

片语

3 axis rough machining三坐标粗加工

rough finish[机] 粗加工

rough&machining(Rough)人名；(英)拉夫

Rough Machining Workshop粗加工车间

rough machining allowance tolerance粗加工余量公差

art crank rough machining曲轴粗加工

rough h machining粗加工

NC rough machining数控粗加工

rough machining base face粗基準

英汉例句

• the clip-type milling cutter is used for rough machining of the leaf-root profile.

  机夹式铣刀用于叶根的粗加工。

• and in order to guarantee the working accuracy of the series of hole, the machining of the hole and the plane is clearly divided into rough machining stage and finish machining stage.

  并将孔与平面的加工明确划分成粗加工和精加工阶段以保证孔系加工精度。

• the problems that the free surface is changed to the ruled surface and complex free surface rough machining is changed to simple ruled surface rough machining are put forward.

  提出将自由曲面蜕变为直纹面，将复杂自由曲面粗加工问题转化为简单的直纹面粗加工问题。

• two fashions of rough machining based on solid models are researched: profile rough machining, iso-height plane rough machining.

  研究了基于实体模型的粗加工的两种方式：外形粗加工和等高面粗加工。

• rough machining surface at the blade root, local stress concentration were the main causes of blade fracture.

  叶片根部加工粗糙，造成局部应力集中是导致叶片断裂的主要原因。

• simulation and experimental results showed that the impeller parts rough machining efficiency was improved by this method.

  结果证明，该方法在一定程度上提高了叶轮零件的粗加工效率。

• the integral-type milling cutter is mainly used for fine machining of a leaf-root profile and rough machining of a small leaf-root profile.

  整体式铣刀刀具主要用于叶根型线的精加工及小叶根型线的粗加工。

• furthermore, appropriate custom cbn cutting tool can withstand the power of rough machining cutting load, the intermittent cutting struck and fine processing of the required heat and wear performance.

  更进一步，恰当的定制cbn刀具能承受大功率粗加工的切削载荷、断续切削的击打和精细加工所需的热和磨损性能。

• chip removing multiple purpose quality, turning, milling, rough machining of steel with medium strength properties, stainless steel, cast steel.

  适用于对中等强度的钢材、不锈钢、铸铁、进行车削、铣削和粗加工。

• installation and debug of rice bran rough machining equipments has been finished, and rice bran oil and cake have been produced.

  现已完成米糠粗加工设备的安装、调试，生产出米糠油、米糠粕。

• pre-grinding gear hobs are widely used as the rough machining cutters for hardened gears with high precision, for they can leave undercut at the root of the gears'teeth.

  由于磨前齿轮滚刀能够使得被加工齿轮轮齿根部产生一定量根切，所以被广泛用作高精度硬齿面齿轮的粗加工刀具。

• in this process, there are much rough machining but less deep and finish machining.

  在制作上粗加工多，深加工、精加工少。

• rough machining shall be performed so as to remove all mill decarburization from the raw material surface.

  必须进行粗加工以去除原材料轧制过程中的表面氧化脱碳。

• by this method the accuracy and speed of the rough cutting processing can be improved. the efficiency of the die adaptive nc rough machining based on stratifying method is increased.

  应用该方法可以减少粗加工余量，提高粗加工精度和速度，提高了层切法模具零件数控粗加工效率。

• at the stage of the rough machining of the open blisk. the plunge milling is presented in stead of the traditional 5-axis nc point milling and side milling for improving the machining efficiency.

  提出在开式整体叶盘的粗加工阶段，采用插铣加工代替传统的五轴数控加工点铣和侧铣，实现高效加工。

• the schemes of rough machining and finish machining are put forward combined with productive practice and the feasible schemes are useful reference to other practices of heavy lathe machining.

  结合生产实际，分别提出了粗加工和精加工工艺方案，对重型车削加工的实际生产具有借鑒作用。

• the utility model has a wide application prospect in the rough machining operation of large and medium-sized lathes.

  在大中型车床的粗加工作业中，具有广泛应用前途。

• finishing machining and rough machining for numeric control turning ellipse curve are investigated through four arc approximation method and the macro program method.

  从四弧逼近法和宏程序编程方法两方面对数控车削椭圆曲线的精加工和粗加工进行了探讨。

• a tool path scheduling methodology for 3d engrave models is presented, which performs rough machining by z-level milling first, then finish machining corner uncut material with pencil tracing.

  在三维雕刻加工中采用先进行层切粗加工然后进行清根精加工的解决方案。

• by comparing the least distance between subdivided control mesh and limit surface with rough machining allowance, the uniform subdivision depth was determined.

  该算法以细分后的控制网格与极限曲面之间的最小距离和粗加工余量作比较，确定均匀细分次数。

• an automatic code generation algorithm for three axes nc rough machining of scattered data is introduced.

  介绍一种用于离散数据的三轴数控粗加工代码生成算法。

• it designs a special craft and equipment of cold rolling rough machining for manufacturing inner gears and spline with big modulus interior involutes profile.

  对于制造大模数渐开线形的内齿和花键，设计了特定冷轧粗加工工艺及其装备。

• the machining precision of the hole is divided into rough machining and precision machining stage.

  并将孔与平面的加工明确划分成粗加工和精加工阶段以保证孔系加工精度。