英语释义

• a ring bearing a signet

片语

seal retaining ring密封固定环

Seal Shim Ring阀盖环

seal protector ring密封防护垫环

seal catch ring密封挡环

seal case ring密封箱圈

C seal-ringC形密封圈

seal packing ringo形密封圈

seal wiper ring封闭刮油环

INTERNAL SEAL-RING内部密封环

英汉例句

• It confirms that tempering quality after being circle checked is the main cause for deformation of the steam seal ring made by rolling.

  通过分析，确认校圆后的回火质量是钢板卷制汽封圈产生变形的主要原因。

• The seal ring is placed overhead to extend the service life.

  密封胶圈上置，延长使用寿命。

• Manufactured by casting polyurethane, main seal ring used in expansion ring testing device for pipeline was designed.

  采用浇注型聚氨酯材料，设计了一种管道用胀环试样试验台主密封圈。

• And the deployment of fire extinguishing force for seal ring fire and floating roof explosion fire was emphasized.

  重点对密封圈火灾和浮顶爆炸火灾的火灾力量部署进行分析确定。

• It provides a theoretical basis for designing the mechanical seal ring equipment.

  这为合理设计机械密封装置提供了理论依据。

• If the residual air in cylinder is impacted by abrupt clamp pressure the seal ring will be damaged due to the effect of diesel oil.

  如果油缸内残留空气受急剧夹压时，那么，由于液压油的作用，有可能使密封圈烧损。

• Carbonization is the use of carbon graphite - graphite seal ring when one of the main reasons.

  石墨炭化是使用碳—石墨环时密封失效的主要原因之一。

• The oven is made of thin steel sheets, fiberglass is inserted between the working chamber and outer plate of the oven as thermal insulation, there is a seal ring embedded in the door.

  烘箱由薄钢板构成，工作室与箱体外壳间以玻璃纤维作保温材料、门面镶有密封圈。

• Teflon - lined pipe, casing, elbow, the three exchanges or four, size head, cylinder, air compressor - oxygen - ring, gasket seal ring and auto parts.

  聚四氟乙烯内衬直管，套管，弯头，三通，四通，大小头，筒体，空压机-制氧机-活塞环、密封圈和汽配封圈。

• The seal assembly comprises a seal ring, a seal ring shell and bellows.

  密封组件包括密封环、密封环壳体和波纹管。

• Analytical method is raised to calculate the distortion on the end of seal ring by application of the theory of moment force of shell and the relevant calculation procedure is prepared.

  提出了应用壳体力矩理论求解密封环端面力变形的解析解的方法，并编制了相应的计算程序。

• Under normal circumstances, after a spring in the long run will be shortened in length, compensation spring moving mechanical seal ring because centrifugal force will cause deformation.

  一般情况下弹簧在长时间运行后长度会缩短，补偿弹簧在动环上的机械密封还会因为离心力的原因而变形。

• The finite element model of rubber dynamic auxiliary seal ring which was installed on the pusher type mechanical seal was established.

  建立了滑移式机械密封装置上动态辅助橡胶密封圈的有限元模型；

• Three kinds of injection sleeves construction, materials, surface treatment and application ranges of floating end face seal ring by die casting are expounded.

  叙述浮动端面密封环压力铸造的三种压射套结构、材料和表面处理工艺及其应用范围。

• First, the water pump mechanical seal ring on the surface of metal corrosion.

  第一，水泵的机械密封上金属环表面均匀腐蚀。

• The tube connector and 「O」 shape seal ring of the valve must be kept clean, and the cross section line of the tube connector cannot be painted.

  联接管与阀口「O」形密封圈套入处应保持清洁， （见图20）联接管有剖面线的部位处不能涂油漆。

• Different body materials and seal ring compound folder layer are suitable for different medium.

  更换阀体材质和密封圈复合夹层可适用不同介质。