片语

secondary shear deformation二次剪切变形

shear deformation parameter剪切变形参数

shear fatigue deformation剪切疲劳变形

shear r deformation剪切应变

shear deformation localization局部化

shear flow deformation剪切流动变形

shear deformation zone剪切变形带

shear-deformation method剪切位移法

the shear deformation剪切变形的

英汉例句

• furthermore, the second-order effect and shear deformation of the structures were magnified due to semi-rigid connections, the ultimate load resistance of the structures was reduced simultaneity.

  半刚性连接还对结构的二阶效应及剪切变形的影响起放大作用，降低结构的极限承载力。

• the calculation of shear strain for simple plane shear deformation was investigated.

  该文研究平面简单切变过程中切应变的计算。

• based on parameters studies, it was proposed that the critical value of lid is 8 beyond which the shear deformation can be ignored in common cases.

  通过参数分析，提出在常见桩土参数情况下可以将剪切效应忽略不计的界限长径比约为8。

• in addition, the influence of shear deformation and that of unequal stiffness, or of variable stiffness in two directions are discussed and simplified approximate formulas are given.

  与此同时，还分析了考虑网架剪切变形、两向不等刚度和变刚度的影响，给出了简化计算的近似公式。

• after the formation of ductile shear zones, there is no strong ductile shear deformation in the region, except some thermal alterations and brittle deformation.

  韧性剪切带形成以后，区内主要经历了热蚀变和脆性变形，韧性变形很弱。

• the middle xuefeng mountain is a regional shear deformation zone, there are many au deposits which connect with the shear zone in the district.

  雪峰山中段为区域性剪切变形带，区内分布了众多与剪切带有关的金矿床（点）。

• all these show that the ductile shear deformation and the extension structural breccia among brittle fracture are beneficial for enrichment and mineralization of gold.

  说明韧性剪切及叠加在韧性剪切之上的脆性破裂均有利于金的富集成矿。

• effect of direction change of shear deformation on the rolling textures in high purity al foils was investigated by orientation distribution function (odf).

  运用取向分布函数（odf）研究了每个轧制道次的剪切变形特征对高纯铝箔轧制织构的影响。

• the first-order derivative equal to zero of total potential energy with respect to the relative shear deformation of shear band leads to the equilibrium condition of elastic rock.

  将系统的总势能对相对剪切变形求一阶导数（等于零），得到了弹性巖石的平衡条件。

• the nonlinear dynamic stability of viscoelastic plates with finite deformations and takingaccount of higher-order shear deformation effects is discussed.

  建立了有限变形条件下，粘弹性基础上考虑高阶横向剪切效应粘弹性板的动力学行为的数学模型；

• it is also found that neglecting the shear deformation of pile will lead to a relatively smaller calculation result, which is not safe in engineering application.

  同时，从分析中还可以发现，忽略桩体的剪切变形，会使实际计算值偏小，这在实际工程中是偏于不安全的。

• the effects of nonlinear normal deformation on p-wave normal incidence are studied without the shear deformation considered.

  在没有剪切波的情况下，探讨节理的非线性法向变形行为对弹性纵波传播的影响。

• the displacement field ensures the continuity of displacements and transverse shear stresses at each interface and includes the influence of transverse shear deformation on the response of laminates.

  该位移场满足层间位移和横向剪应力的连续性，较充分反映了横向剪切对层合板壳力学行为的影响，但位移场的变量和运动方程均为五个，与一阶剪切变形理论相同。

• the agreement between the gold mineralization time and the right–lateral strike-slip shear deformation time shows diversity in different part of the shear zone.

  金成矿和右行走滑剪切变形之间的时间耦合关系在不同部位还有不同的表现。

• the main advantages are the transverse shear deformation and rotary inertia are considered naturally, and there is no restriction on the thickness of plate and height of stiffener.

  主要优越性表现为：结构的旋转惯性、剪切变形等都得到了考虑，且不限制结构的板厚度和加强筋的高度。

• there is a gradual decrease in tectonic superimposed hydrostatic pressure from compressional deformation zone through shear deformation zone to extensional deformation zone.

  处在挤压变形带、剪切变形带到引张变形带（及地域）中巖石所承受的构造附加静水压力有逐次变小的规律性。

• an element tangent stiffness equation was derived based on the secant stiffness equation of stability function elements with shear deformation effects considered.

  以考虑剪切变形影响的稳定函数单元的割线刚度方程为基础，导出了单元切线刚度方程。

• the spatial development of a single shear band in saturated brittle rocks for anti-plane shear deformation is investigated.

  对反平面剪切条件下饱和脆性巖石中单个剪切带的空间发展进行了分析。

• the effects of bending-torsion coupling, warping stiffness, shear deformation and rotary inertia are taken into account in the present formulations.

  在本文研究中考虑了弯扭耦合、翘曲刚度、转动惯量和剪切变形的影响。

• considering the influences of transverse shear deformation and large displacement, the basic non-linear dynamic equations of high pier under impulse loads were established.

  考虑剪切变形和大位移的影响，建立高桥墩在沖击荷载作用下的非线性动力学基本方程式；

• based on the theoretic model of one-dimensional shear deformation under high rate loading, a relation of width and spacing for adiabatic shear band to cutting speed is proposed.

  通过对高应变速率一维剪切变形理论模型的分析，提出了绝热剪切带宽度和间距与切削速度的关系式。

• reference to the derivation of the general beam element matrix, taking into account the shear deformation of the beam element, it is derived spatial beam element stiffness matrix.

  参考一般梁单元矩阵推导过程，考虑了梁单元的剪切变形，推导出空间梁单元刚度矩阵。