shear fracture中文,shear fracture的意思,shear fracture翻译及用法

2025-08-14 19:35 浏览次数 8

shear fracture

英[ʃiə ˈfræktʃə]美[ʃɪr ˈfræktʃɚ]

剪断裂;剪切破坏

shear fracture 英语释义

英语释义

    1. a fracture produced in rocks by shear — compare gash fracture

shear fracture 片语

片语

shear mode fracture剪切断裂

rock compression shear fracture巖石压剪断裂

shear r fracture剪切破坏

shear failure[力] 剪切破坏;剪破裂;剪切断裂

Percent shear fracture appearance剪切面积百分比

shear fracture transition temperature剪切断裂转变温度

shear fracture toughness剪切断裂韧度

principal shear fracture主剪切裂缝

shear deep fracture剪性深断裂

compress-shear fracture压剪断裂

shear fracture 例句

英汉例句

  • From the point of view of fracture mechanics, we studied the far displacement field produced by a disk-shaped pure shear fracture and obtained an analytic expression for that field.

    作者从断裂力学观点研究了圆盘形纯剪切破裂产生的远场位移,导出了远场位移的解析表达式。

  • The model calculation results indicate that shear fracture energy of a fault generally increases with depth; at a certain depth it reached a peak value, then turns gradually attenuated.

    模型计算结果表明,断裂的剪切破裂能随深度增加通常呈现先上升,在某一深度上达到峰值后逐渐衰减的形态。

  • It shows from study that the first section of rock system in Gai County , the shear fracture zone extending toward northwest and Wolongquan rock mass are major geological factors of ore control.

    研究结果表明,盖县组一段巖石、北西向延伸的剪切破碎带以及卧龙泉巖体是主要的控矿地质因素。

  • On structure it is a west leans「 structural nose, the large-scale shear fracture growth and complicate the structure;

    ③构造上为一西倾鼻状构造,大型剪切断裂发育且将构造复杂化;

  • Tensile and pressure-shear numerical tests are carried on the concrete specimens with precast cracks, and the tensile fracture and shear fracture process are obtained.

    对预制裂纹的混凝土试件进行拉伸、压剪数值试验,得到混凝土拉伸断裂及压剪断裂破坏过程;

  • The NW and ne trending fault zones shape a conjugate pattern in this region, which represents a developing conjugate shear fracture system in the crust under the stress field since neotectonic time.

    与北东向断裂带呈共轭关系,是在先存构造基础上于新构造应力场作用下正在发育的一套地壳共轭剪切破裂系统。

  • The shear fracture phenomena of HR-2 steel tube under shock loading were studied.

    介绍了对HR 2抗氢钢圆管在内爆压缩加载过程中的剪切断裂现象的初步研究结果。

  • The extension length of rock compression and shear fracture nucleus of the earth」s crust is discussed, and it is verified by in-situ findings of geological investigation.

    探讨了地壳巖石压剪断裂核的延深长度,并借矿床地质调查的成果加以实证。

  • Coulomb「s criterion of shear fracture is used to determine whether these stress components will trigger the earthquakes or not.

    根据巖石的库侖剪破裂準则来判断潮汐应力对所研究的震例是否具有触发作用。

  • The results show a certain time thermal cycle can cause the fracture mechanism change. It varies from original pure shear fracture to microvoid coalescence fracture gradually.

    结果表明,一定时间的热循环会造成LF6铝合金焊接接头断裂机理的改变,由未经热循环时的纯剪切型断裂,逐渐过渡成微孔聚集型断裂。

  • Studies show that the ore-controlling modes in Fengjiayu iron ore area include fold texture and ductile-brittle shear fracture composite texture types.

    研究表明,冯家峪铁矿矿区内构造可分为褶皱构造控矿模式以及褶皱构造和韧脆性剪切断裂复合构造的控矿模式。

  • Therefore, ductile shear zones can lead to shear fracture at the same structural level where ductile deformation develops.

    由此可见,韧性剪切带在同一构造层次情况下,可在变形较强的部位产生剪破裂;

  • The Changpo reverse anticline controls the location of Changpo-Tongkeng deposit, while the bed-parallel shear fracture zone and thrust fault control the ore bodies.

    长坡倒转背斜控制长坡-钢坑矿床的产出,层间剪切破碎带和逆掩断层控制着矿体的空闻位置。

  • The method of the equivalence of the mechanical parameter is also given based on the deformation regularity of the normal and shear fracture of the single fracture.

    在单一裂隙法向变形和剪切变形规律的基础上,给出其力学参数等效方法。

  • Percent shear fracture appearance is an important factor to evaluate neutron irradiation embrittlement of nuclear pressure vessel steel.

    在核压力容器钢的中子辐照脆化评价中,断口剪切面积百分比是一个重要的参数。

  • Through to the shear fracture conductivity theory and experiment」s research indicated that shear fracture conductivity is limited.

    剪切裂缝导流能力理论和实验的研究表明剪切裂缝导流能力有限。

  • Finally, this paper gives a shape equation of rock compression shear fracture nucleus describing the microcracking zone.

    在上述结果基础上,提出了描述该微裂区的巖石压剪断裂核的形状方程。

  • The tensile shear properties, mass loss ratio and surface residual stress of the bond samples before and after the thermal cycling were measured. The tensile shear fracture morphologies were observed.

    测试了热循环前后胶接试样的拉伸剪切性能、质损率和表面残余应力,观察了拉伸剪切断口形貌。

  • The rock rupture state can be seen in the microcosmic photo of the notched area of compression and shear fracture samples before failure. The results agree well with the theoretic analytic results.

    在压剪断裂试件临破坏前切口区域的微观照片中可见巖石破碎情况,与理论分析相符。

相关热词