英语释义

1. detrusion or deformation by which a small rectangle is changed into a parallelogram and in which deformation is measured as the total angular change in radians at each corner

片语

severe shearing deformation强烈塑性变形

geostrophic shearing deformation地转切变变形

shearing deformation theory剪切变形理论

ductile shearing deformation韧性剪切变形

shearing deformation energy剪切变形能

compressive shearing deformation压剪变形

ductile shearing deformation association韧性变形组合

Local shearing deformation局部剪切变形

transverse shearing deformation横向剪切变形

英汉例句

• when displacement and force iterative formulae are derived, the bending deformation and shearing deformation are taken into account.

  文中推导了位移及力的迭代公式，其中考虑了多阶剪力墻的弯曲变形及剪切变形。

• the high natural frequencies of symmetrical section beam with different constraints are calculated in detail, and effects of rotary inertia and shearing deformation are given.

  计算了对称截面粱在不同边界条件下的高阶固有频率，讨论了转动惯量及剪切变形效应对各阶固有频率的影响。

• shearing angle can be adjusted within a certain range, which can reduce the shearing deformation of sheet metal and can shear much thicker sheet metal.

  刀架剪切角能在一定的范围内调整，可使剪切材料变形量减小到理想状态，又可剪切超厚板料。

• the influence of shearing deformation causes the non-uniform stress in the wing plate of the box girder, especially the cantilever box girder.

  剪切变形的影响使得箱形梁的翼板中出现应力不均匀现象，尤其是悬臂箱形梁剪力滞现象。

• the result also denotes the shearing deformation and rotary inertia of the beam have significant effect on the high frequency.

  当考虑梁的剪切变形和转动惯量时，则对梁的高阶频率影响较大。

• the transverse shearing deformation and rotational inertia are taken into consideration in the chosen thick plate strips.

  所取厚板条考虑横向剪切变形和转动惯量，并取它的各阶振型为条向连续函数。

• thus the effect of transversal shearing deformation on the buckling characteristics of composite laminated plates can be investigated more accurately by means of the modified model.

  改善后的模型能较好地反映横向剪切效应对复合材料层板屈曲特性的影响。

• on case of shearing deformation mode, d value method be reasonable; while bending deformation mode, compatible displacement method be adopted.

  当支撑的变形型式为剪切型时用d值法，当支撑变形型式为弯曲型时用与框架协同工作的位移法。

• the mineralization mechanism is that the brittle-ductile shearing deformation dynamically resulted in diagenesis and mineralization.

  其成矿机理是脆韧性剪切变形动力成巖成矿。

• considering the layer of soil mass and the change of body friction force of single pile, cooke's shearing deformation method is discussed and is made to be tally with the actual situation.

  考虑到土的成层性和桩周摩阻力的变化，对库克剪切变形法进行了探讨，使之更符合实际情况。

• on the basis of load transfer mechanism and destruction patterns of single pile, load transfer method and shearing deformation method for subsidence computing of single pile are mainly discussed.

  在分析单桩的载荷传递机理、单桩的破坏模式的基础上，重点探讨了单桩沉降的载荷传递法和剪切变形法。

• the ductile shearing deformation took place contemporaneously with, but have a wider extent of influence than, the nappe deformation.

  韧性剪切变形与推覆变形同期产生，但影响范围更广泛。

• with the shearing deformation theory and deductive theory, the calculational formulas of flexibility coefficient of the pile head can be obtained.

  采用剪切位移法，利用递推原理导出桩顶柔度系数的计算公式；

• aimed at the bend of poplar-straw laminated beam, the theory of delamination shearing deformation was used to analyse its bending deflection and strength, and compared the results with other theories.

  针对杨木—秸秆层合梁的弯曲问题，利用分层剪切理论对其变形和强度进行了分析。并将分析结果与经典理论、一阶和高阶剪切变形理论的结果进行了比较。

• the hysteresis loop, stiffness digration, energy dissipation, ductility, reinforcement strain and shearing deformation of core of beam-column joints are studied.

  试验从滞回曲线、刚度退化、能量耗散、延性、主筋应变及节点核心区剪切变形等方面进行了研究。