英语释义

• formed into a mass by heat and pressure

片语

sintered metal烧结金属

sintered filter烧结过滤器

Sintered magnesia烧结镁砂

sintered iron烧结铁

sintered magnet烧结磁铁

sintered catalyst烧结催化剂

sintered bronze烧结青铜

Sintered ferrite烧结铁氧体

sintered copper[材] 烧结铜

sintered piece烧结零件

英汉例句

• the present paper has briefly described the basical technologies of sintered high speed steel products and their properties.

  本文简述烧结高速钢制品的基本生产工艺及其性能。

• is china's largest sintered ndfeb magnet production, one.

  是中国最大的烧结钕铁硼磁体生产企业之一。

• it is clarified that the specimens of smaller mixing and injection machines were smaller variation in weight loss, sintered density and strength.

  结果表明，较小的混炼机和注射机制造的试样，重量损失、烧结密度和强度的变化程度较小。

• with prolonged or shortened pulse electrical current sintering time, the density, hardness and bend toughness of the sintered materials decreased.

  进一步延长或缩短脉沖电流烧结时间，烧结体的密度、硬度和弯曲强度反而下降。

• ppl is one of the worldwide suppliers of seawater-based large crystal sinter and, with 110 employees, produces roughly 70, 000 metric tons of sintered magnesia annually in the north of dublin.

  ppl公司位于爱尔兰都柏林北部，是世界上从事海水提炼大结晶镁砂的着名生产企业，员工110人，年产结晶镁砂约7万吨。

• compared with sintered magnets, bonded magnets have excellent attribute for processing and machining, so they have attracted wide attention in recent years.

  与烧结磁体比较，粘结磁体具有优异的成形与加工性能，因此近年来引起了人们广泛的关注。

• it shows that ceramic material with good performance can be obtained by sintered technique to change crystal phase in ceramics product.

  这表明，可以通过烧结工艺改变陶瓷制品中的晶相，从而获得性能优良的陶瓷材料。

• the difference in the microstructures of the sintered bodies of diamonds with si-ti-b as additives and with nickel as additives were investigated.

  本文研究了形成强碳化物的元素，和触媒金属镍作添加剂得到的超细晶粒度金刚石烧结体在显微组织上的差异。

• the micro-morphology of the sintered samples was observed with three-dimensional digital microscope.

  采用三维数字显微镜观察了烧结试样的微观形貌。

• made by mixing elemental or alloy powders and compacting the mixture in a die, the resultant shapes are then sintered or heated in a controlled atmosphere furnace.

  通过混合元素或合金粉末并在模具中压实混合物，再烧结或在环境可控炉内加热制成最终形状。

• the wear resistance and oxidation resistance of sintered diamond with different additives were measured.

  对含不同类型添加剂的金刚石烧结体进行了耐磨性、抗氧化性等性能的测定。

• after inspected by sem, the results indicated that the porous surface tubes sintered by the new process had high quality and strong joint strength.

  采用扫描电子显微镜（sem）对表面多孔管进行检测，结果显示用新工艺烧结的表面多孔层质量好、结合强度高。

• a new type of catalytic distillation column has been developed by means of surface modification and catalyst combination to sintered metal porous materials.

  采用特定的方法对金属烧结多孔材料进行表面改性和催化剂复合，开发出一种新型的催化蒸馏构件。

• this compacted material is placed in an oven and sintered in a controlled atmosphere at high temperatures and the metal powders coalesce and form a solid.

  被压实的材料置于炉内烧结，在高温下炉内环境可控，金属粉末熔合形成固体。

• in view of sintering process that is complex physics - chemistry process with long time - delay, bp network is adopted to forecast quality of sintered ore.

  针对烧结这一复杂的物理、化学反应过程的纯滞后特别大的特点，采用bp网络对其烧结矿的质量进行预测。

• its sinter has high toughness, excellent sintered property and bending strength owing to martensitic transformation.

  其烧结体由于马氏转变而具有高的韧性，优良的烧结性能和抗弯强度；

• however, the high temperature sintered body strength slightly lower, mainly for the use of low temperature environment.

  但是烧结体的高温强度稍低，主要用于使用温度较低的环境。

• the application of powder injection molding in the production of bonded magnets and sintered magnets were discussed.

  讨论了粉末注射成形在粘结磁体生产中的应用和烧结磁体研究开发的现状。

• china has still a large number of residential construction using sintered clay brick.

  中国仍然有大量的住宅建筑使用烧结粘土砖。

• the result indicate that the sintered test can produce porous materials, which would benefit to the study and preparation on filtrating materials.

  实验结果表明，烧结可以获得多孔的材料，对于研究和制备过滤材料有一定的参考价值。

• the processing and its requirement on manufacturing bonded permanent magnets and sintered magnets by mim are discussed in detail.

  详细介绍mim粘结永磁和烧结磁体的基本工艺过程及基本要求。

• production process, properties and factors affecting their performance of water atomized iron powder used for sintered machine parts, welding electrodes and other fields were introduced.

  介绍了用于烧结机械零件、电焊条和其它领域的水雾化纯铁粉的生产工艺，产品性能及其性能变化的影响因素。

• also the result shows that, as sintered in reducing atmosphere, the dielectric loss of the material increase.

  研究的结果还表明，由于在还原气氛中烧结，材料的介电损耗上升。

• pre-alloyed powders are harder, less compressible and hence require higher pressing loads to produce high density compacts. however, they are capable of producing high strength sintered materials.

  预先合金粉末比较硬、不容易压实，因此需要较高的挤压力来产生高密度的压制物。然而它们能生成高强度烧结材料。

• as an important procedure for sintered and bonded magnets, orienting compression has direct influence on the property of the magnet.

  取向成型是烧结和粘结磁体的一道重要工序，对最终磁体的性能有直接影响。

• at the same time, the dielectric properties of good sintered body were measured and analyzed.

  并对烧结良好的烧结体的高频介电性能进行了测量和分析。