英汉例句

• the microstructure of crystallized cristobalite, tridymite andmelanophlogite have been studied and the effect of crystallization on sintering of compositealso has been discussed.

  对所析出的方石英、鳞石英和硫方石英的显微结构进行了讨论，同时亦讨论了石英玻璃的析晶对复合材料烧结的影响。

• the successful sintering of chromite fines will technically support chinese ferroalloy industry to produce ferrochromium on cheap chromite fines at low cost.

  铬铁矿粉烧结的成功将为我国铁合金行业充分利用廉价铬铁矿粉提供技术支持，有利于降低铬铁合金生产成本。

• expounds chiefly void mechanism and character ristics of basic lining, introduces operating gists of the knot, drying furnace and sintering of lining.

  简述了堿性炉衬的特性及失效机理，介绍了炉衬打结、烘炉、烧结的操作要领。

• it was described that study on gel casting and sintering of silicon carbide in this paper.

  研究了碳化硅耐火材料的凝胶注模成型及其烧结性状。

• for the goal to overcome the problems due to the fuel and pollution of conventional sintering, a primary study about microwave sintering of magnetite concentrates has been done.

  因此针对传统烧结需要消耗大量固体燃料和产生环境污染的弱点，本文对磁铁精矿的微波烧结进行了探索性研究。

• the effect of fe-b alloy and mo on sintering of steel based carbide is reviewed.

  对铁硼合金和钼对钢结硬质合金烧结的影响进行了综述。

• sulfur poisoning, coking, sintering of fischer-tropsch synthesis(fts) catalyst were discussed in this paper.

  本文对f-t合成催化剂硫中毒、结焦、烧结等催化剂失活原因进行了探讨。

• it is mainly used for sintering of hard alloy, magnetic alloy, ceramic and powder materials.

  主要用于硬质合金、磁性合金、陶瓷及粉体材料的烧结。

• the slagging and sintering of de-cws has been forecasted by grey clustering model. the survey is anastomotic with experiment results.

  并应用模糊综合评判模型对脱硫型水煤浆进行了结渣预测，结渣指数变化规律与实验结果相吻合。

• the characteristics of sintering of baima v-ti-bearing magnetite concentrate were analyzed.

  分析了白马钒钛磁铁精矿烧结的特点；

• the feasibility of sintering of indian iron ore totally was reviewed in this paper.

  对全印度粉烧结的可行性进行了研究。

• preliminary dehydration, granulation and sintering of vacuum-filter dust containing 40% of water can continuously be accomplished in wet rotary kiln.

  用湿式回转窑工艺设备，在窑内相继对真空过滤机产生的尘泥（含水40％左右）进行初步干燥、造粒、烧结三个过程。

• in this paper, the workmanship of reactive sintering of thermal spray coating, microstructure and bonding property are introduced.

  介绍了热喷涂层的中温反应烧结工艺，及其组织结构的特点和涂层结合性能。

• reactive sintering of ceramics on the base of boron nitride was studied, and the inert filler was given in this paper.

  研究了氮化硼陶瓷的反应烧结，给出了所用惰性填料。

• the mechanism of fe-al intermetallic compounds formation and pores formation in the reactive sintering of fe and al element powders was studied with iron - aluminum diffusion couples.

  采用扩散偶研究了铁铝金属间化合物和孔洞在铁铝粉末反应烧结中的形成机理。

• for noncatalytic operations at high temperature the agglomeration and sintering of fine particles can necessitate a lowering in temperature of operation.

  对于一些高温非催化操作，由于微粒易于聚集和烧结，不得不降低操作温度。

• in the second stage, sintering of primary and secondary particles occurs simultaneously, but the sintering of the compact is controlled by the primary particles.

  在烧结的第二阶段，一级与二级颗粒的烧结同时进行，但压块的烧结是被一级颗粒的烧结所控制。

• densely sintering of dolomite ore is difficult because decomposing of carbonate results in forming porous structure during calcining process.

  由于白云石在煅烧过程中碳酸盐分解后形成多孔疏松结构，使其难以烧结致密。

• selective laser sintering of foundry silica sands was investigated by experiments.

  对铸造硅砂的选择性激光烧结进行了试验研究。

• there was a threshold time for the sintering of partial prealloyed saw segment.

  预合金化胎体的烧结保温时间有一门槛值。

• the causes of decarburization in the sintering of ferrous products using dissociated ammonia as atmosphere are analysed and some methods and routes to control decarburization are discussed.

  对铁基制品采用分解氨作烧结气氛时的脱碳原因进行了分析，探讨了几种控制脱碳的方法及途径。

• microwave energy is a clean energy, and microwave sintering of magnetite concentrates is a new subject by microwave heating effect.

  微波能是一种清洁型的新型能源，利用微波的热效应进行磁铁精矿微波烧结是一项全新的课题。

• this paper reviews the latest development of high curie point ptc ceramics and low temperature sintering of pt c ceramics.

  综述了近年来高居里点ptc陶瓷研究和ptc低温烧结研究的进展。

• technical support: technologies and equipment for pressing, sintering of large products, technologies for controlling of microstructures.

  技术支撑：大异制品的成形、烧结技术与设备，显微结构控制技术。

• numerical simulation model for the thermal process of selective laser sintering of powders was presented to predict the sintered width and depth in selective laser sintering.

  建立选择性激光烧结粉末的快速成型工艺过程的数值计算模型，并用于估算热固结宽度和深度。

• methods for the preparation of nano-ceramics including the preparation, molding and sintering of nano-ceramic powders are introduced in the paper.

  主要介绍了纳米陶瓷的制备方法，包括纳米陶瓷粉体的制备、成型和烧结。

• the reactions during sintering of si-ti-b doped diamond were studied by using xda and tem.

  采用x射线衍射分析和透射电镜观察，研究了硅-钛-硼掺杂金刚石在烧结过程中各物相的反应。

• the sintering of the dopedbariumtitanate include solid-solid sintering and solid-liquid sintering.

  掺杂钛酸钡陶瓷的烧结包括固-固烧结和液-固烧结。