英汉例句

• The effects of pore-forming materials and sintering temperature on the properties of porous aluminum titanate ceramics are investigated.

  本文探讨了成孔剂和烧结温度对钛酸铝多孔陶瓷性能的影响。

• The process conditions, including presintering temperature, sintering temperature and time, cooling mode and pretreatment were studied.

  对烧成过程（预烧温度、烧结温度及保温时间、降温方式）及预处理工艺进行了研究。

• With increasing sintering temperature and time, the pore size and porosity decrease, and the shape of the pore turns into sphere.

  随烧结温度的增加与时间的延长，多孔钛的孔隙尺寸和孔隙度随之减小，孔隙形状从不规则向规则球形转变。

• The activity for esterification and mechanical strength of the solidified samples were observed. The effects of the amount of Kaolin added and sintering temperature were also observed.

  考察了高岭土的加入量、烧结温度对固化样品的影响，研究了固化样品的酯化活性与机械强度。

• The influence of sintering temperature on mechanical properties of alloys was investigated by measuring their density, linear shrinkage, tensile strength and hardness.

  通过测定其相对密度、线收缩率、拉伸强度和硬度，研究了烧结温度对合金性能的影响。

• High sintering temperature and long maintaining time lead to the sufficient crystallization and the full densification, but result in the worsening of the deviation from the stoichiometry.

  高的烧结温度和长的保温时间使结晶更加充分，样品致密度更好，但是也造成偏离化学计量比的加剧。

• In this paper, the effect of sintering temperature on densification, phase compositions and microstructure was mainly studied.

  本文作者主要研究了不同烧成温度对复合材料致密化、物相组成和显微结构的影响。

• The effect of the sintering temperature on the result of the graphite sealing was discussed.

  本文讨论了焙烧温度对石墨密封结果的影响。

• Higher the content of reactants and the sintering temperature are, better the electrical property is.

  反应原材料成分及烧结温度越高则导电性能越好。

• Results show that the main factor affected character of haydite consists of sintering temperature and content of fly ash.

  结果表明，烧成温度和粉煤灰用量是影响粉煤灰品质的主要因素。

• The results indicate that sintering temperature plays a prime role in the development of the number of phase layers and affects the thickness of diffusion solution layer by the thermal time.

  实验结果表明，烧结温度对相层数量起主要作用，并和保温时间一起影响扩散溶解层厚度。

• The results reveal that the increase of the sintering temperature and the hot-pressing pressure can promote the formation of cristobalite in the fibrous composites.

  结果表明热压烧结温度和压力对复合材料中方石英的析出有着显着的促进作用；

• The effects of the reaction time, the sintering temperature on the crystal morphology of HAP and homogeneity were investigated.

  研究了化学反应时间与烧结温度对HAP的结晶度和颗粒均匀性的影响规律。

• The developed porcelain material used for isostatic pressing has low sintering temperature and high mechanical, electrical and thermal performances;

  研制出的等静压电瓷材料具有较低的烧成温度和良好的机、电、热性能；

• The result shows that the sintering temperature of ceramic body is reduced, but the toughness is improved obviously on substitution of nepheline for feldspar.

  试验结果表明，霞石替代长石不仅能降低瓷坯的烧成温度，而且瓷坯的强度也有明显改善。

• The phases of reaction layer were charactered by XRD, the influence of microstructure and the sintering temperature on the thickness of reaction layer was observed by SEM.

  用XRD分析了界面反应层的相成分，用扫描电镜对反应层的微观结构、反应层厚度与烧结温度的关系进行研究。

• The sintering quality and shrinkage of the sintering parts were compared under vacuum or hydrogen atmosphere and different sintering temperature and heating rate.

  通过采用真空烧结和氢气气氛烧结、改变烧结升温速率和烧结温度，对比了烧结件的烧结质量和烧结收缩等情况。

• The effect of sintering temperature on the cyclic performance for materials was discussed.

  讨论了煅烧温度对材料循环性能的影响。