英汉例句

• this paper reviews the design method of membrane bioreactor, including determining hydraulic retention time and sludge retention time, choosing sludge concentration and analyzing the process economy.

  综合论述了膜生物反应器的设计方法，包括确定最佳水力停留时间、污泥停留时间、污泥浓度，经济性分析。

• application of plc in belt press filter for sludge concentration and. dehydration …

  plc在污泥浓缩脱水一体化带式压滤机上的应用。

• the model, which describes the sludge thickening and storage processes in a secondary clarifier, can simulate the time variation of the sludge concentration distribution over th…

  模型描述了污泥的浓缩和贮存过程，可用于模拟二沉池中的污泥沿池深方向的分布和底流污泥浓度随运行条件的动态变化。

• the thickening effect is poor when the inlet sludge concentration is lower than 0.12%.

  浓缩池进泥浓度对浓缩效果有一定的影响，进泥浓度时，浓缩效果较差；

• two methods determining the sludge volume index under diluting sludge concentration and practical sludge concentration are analysed and compared.

  同时，对在稀释浓度和实际浓度条件下测定污泥指数的两种方法进行了分析比较。

• activated sludge process with high sludge concentration has been applied to treat beer brewing wastewater.

  采用高浓度活性污泥法处理啤酒废水。

• in this paper, application of sludge concentration and de watering integration technique in sewage treatment plant is put forward, and bas ic principles and technical features are elaborated.

  提出了污泥浓缩脱水一体化技术在污水处理厂中的应用，并就其基本原理和技术特点进行了阐述。

• in operational phase, the color of granular sludge in each compartment are bright black, the sludge concentration gradually become larger, the methanogenic activity also increased.

  运行阶段，颗粒污泥颜色变深，全部变成亮黑色，污泥浓度逐渐变大，产甲烷活性也增强。

• there is a high sludge concentration in the bioreactor, with strong nitrification ability and high pollutant removal rate.

  考察了水力停留时间对反应器的影响以及间歇运行方式和污泥浓度对膜污染的影响；

• because of the characteristics of long srt and high sludge concentration in mbr compared with traditional active sludge process, the biomonitoring is a main parametric of the study of mechanism.

  由于该工艺污泥停留时间长、污泥浓度高等特点，与常规活性污泥工艺差距较大，所以对反应器内的生物相监测是研究其处理机理的重要内容。

• the model, which describes the sludge thickening and storage processes in a secondary clarifier, can simulate the time variation of the sludge concentration distribution over the tank depth…

  模型描述了污泥的浓缩和贮存过程，可用于模拟二沉池中的污泥沿池深方向的分布和底流污泥浓度随运行条件的动态变化。

• through mechanical agitation the inner circulation of activate sludge was strengthen, the activation of sludge was enhanced, and the sludge concentration would be 4.

  活性污泥通过机械搅拌强化污泥内循环回流，提高了污泥的活性，并且使污泥浓度可达到4。

• sludge concentration in a bio-reactor is one of the important parameters for mbr. it influences not only the removal efficiencies of pollutants but also the flux of membrane module.

  反应器内的污泥浓度是膜生物反应器（mbr）运行的重要参数之一，它不仅影响污染物的去除效果，还影响膜组件的产水量。

• sludge concentration entering the drum belt dewatering equipment integration, preparation through flocculant dosing system will be mixed into the polymer flocculant reaction vessel.

  污泥在进入转鼓浓缩带式脱水一体化设备之前，通过絮凝剂制备投加系统将高分子絮凝剂打入混合反应槽中。

• application of plc in belt press filter for sludge concentration and.

  plc在污泥浓缩脱水一体化带式压滤机上的应用。

• the higher the sludge concentration and the flux were, the easier it was for the sludge particles to deposit on the membrane surface.

  污泥浓度愈高，膜通量愈大时，活性污泥颗粒愈易在膜面沉积。