片语

spindle rotate speed主轴转速

Spindle rotary speed range铣头主轴转速范围

Max Spindle rotate speed主轴最大转速

Spindle max speed主轴最高转速

Spindle rotation speed主轴转速

Spindle wheel speed主轴转速

spindle feed speed主轴进给速度

Max spindle rotating speed最高主轴转速

英汉例句

• the results show that the vibrational response varies regularly when the spindle speed is continuously changed from low to high. the lowest point of the response is the stable cutting point.

  结果表明，连续改变机床主轴转速时振动响应的最低点即为不发生颤振的稳定切削点。

• means are provided for varying the spindle speed and (on some machines) for automatically feeding the drill into the workpiece.

  另有各种装备可改变转轴速度及使鉆头自动鉆入工作件中。

• the results show that the vibrational response varies regularly when the spindle speed is continuously changed from low to high.

  结果表明，连续改变机床主轴转速时振动响应的最低点即为不发生颤振的稳定切削点。

• in 3, the main rotary machine driven by ac motor, the 16 spindle speed change mechanism, realize the speed range of working table.

  机床的主转动由交流电机驱动，经16级主轴变速机构，实现工作台的转速范围。

• increasing spindle speed makes the diamond blade cut harder, decreasing the spindle speed makes the blade cut faster.

  提高转速使金刚石刀片切割难度，降低主轴转速使刀片切割速度更快。

• high speed and high precision machinery should have not only high spindle speed and high feeding speed, but also high spindle and feeding system acceleration.

  高速高精度机床不仅要有高的主轴转速和进给速度，而且还需要具有高的主轴和进给系统运动加速度。

• using taguchi method to optimize the operation about the depth of cut, the spindle speed and the feed rate. then the optimal cutting parameters can be drawn after analysis.

  应用田口法分析主轴转速、背吃刀量和每齿进给量三个可控因素对表面粗糙度的影响，经过分析可以得出最优的参数组合。

• due to the unreasonable design of the transmitting ratio in the major transmission system of lathe c6143, the progression of the spindle speed is asymmetrically distributed.

  在c6143型普通车床主传动系统中，由于传动比设计不够合理，致使主轴转速级数分布不均；

• the experiments to verify the limit cutting depth show that the cutting efficiency of machine tool can be improved by cutting at the spindle speed corresponding to the stable cutting point.

  极限切深试验表明，以稳定切削点所对应的主轴转速进行切削可以提高机床的切削效率。

• in the mechanical structure of the spindle box is the main drive designed to be given under the conditions of the main spindle speed drive system design.

  在机械结构中主要是主轴箱的传动设计，能够根据以给定的条件主轴转速来设计主传动系统。

• the spindle speed of ca6140 remains the manual function of shifting gears. the alteration is easy and it can reduce labor intensity and improve productive efficiency.

  ca6140车床主轴转速部分保留原车床的手动变速功能，改造简单易行，可降低劳动强度，提高生产效率。

• an applicable method to control regenerative cutting chatter automatically based on the optimal regulation of spindle speed is introduced.

  提出一种实用的通过主轴转速寻优调整对再生型切削颤振进行自动控制的方法。

• the limit cutting depth of the machining system with optimal controlling spindle speed is studied by experiments.

  对优控主轴转速系统的极限切削深度进行了试验考证。

• an ar model based on spindle speed is developed. using the model, the thermal error can be predicted without measuring the temperature field of machine tool.

  建立了基于主轴转速的热误差自回归模型，从而不需要测量机床的温度场就可以预测热误差。

• f is the feed rate the spindle speed and tool length offset may also appear on a linear move, this is more likely with multi-axes moves.

  还有主轴转速或者刀长补正也可能出现在线性移动的表达式后面。