片语

surface abrasion morphology表面磨损形貌

Body surface morphology体表形态

wear surface morphology摩擦形貌

surface erosion morphology表面侵蚀形态

surface growth morphology表面生长形貌

surface slip morphology表面滑移形貌

surface structural morphology表面结构

Surface morphology Dimension Measurement表面形貌

surface morphology characteristic表面轮廓特征

英汉例句

• In addition, the surface morphology of active composite layer and the interface modification between active layer and electrodes could also influence the power conversion efficiency of the solar cell.

  通过对器件活性层和电极界面进行修饰和采用不同溶剂、不同给受体掺杂比例、不同活性层厚度成膜等方法对器件进行优化并研究其与器件性能之间的关系；

• The structure, surface morphology and the optical properties were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL).

  用X 射线衍射（XRD）、扫描电镜（SEM）、荧光光谱（PL）对样品进行结构、形貌和发光特性的分析。

• The surface morphology and section view of Al substrate in different conditions and Cr deposition were observed by SEM.

  利用扫描电镜（SEM）及背散射电子像，观察了不同条件下基体与铬镀层的表面及断面形貌。

• The crystal structure, surface morphology and spectral characteristics of the samples were investigated by X-ray diffraction (XRD), SEM and fluorescence spectrophotometer.

  用XRD、SEM和荧光分光光度计，对试样的晶体结构、表面形貌及发光性能进行表征。

• Methods with chloroform as the solvent, the PLGA fiber scaffolds with different surface morphology were produced altering PLGA solution concentration and the flowing rate.

  方法本实验以氯仿为溶剂，调节plga溶液浓度和流量分别制备了具有不同表面形貌的纤维支架。

• The effects of the technological parameters on the quality of the films were studied. The growth rate and surface morphology of the films with cycle times were characterized.

  考察了工艺参数对薄膜质量的影响，对薄膜的表面形貌，薄膜的生长速率以及热处理与薄膜的成相及其电阻率的关系进行了观察和分析。

• However, at more anodic potentials another dissolution process was observed producing noticeable changes on the surface morphology which could be ascribed to the dissolution of a au-sn surface alloy.

  然而，在另一个阳极电位更正的阳极溶解过程中，观察到在表面形貌上产生明显变化的原因是金锡合金的溶解。

• The results show that the surface morphology of single-pulse ablation region seems like a circular crater with edge upheaved;

  结果显示：单脉沖烧蚀时的典型表面形貌为周围隆起的圆形弹坑；

• The fiber surface morphology analysed by AFM also approved the result of XPS analysis.

  利用AF M对纤维表面形貌分析的结果与XPS结论一致。

• The surface morphology and chemical structure of the film are characterized by Atomic Force Microscope (AFM) and Fourier Transform Infrared Spectroscope (FTIR).

  并且分别利用原子力显微镜和傅立叶变换红外光谱对薄膜进行界面形态和微观结构分析。

• Observed at different stages of endoscopic sinus nasal mucosal surface morphology and function of cilia changes in the transmission.

  观察不同阶段内窥镜下术腔形态学及鼻腔粘膜纤毛输送功能改变情况。

• Objective To further examine and study the pathogenic change of crocidolite dust, the fiber self-imperceptible changes, remained features and the new surface morphology of crocidolite surface in rat.

  目的观察和研究天然青石棉矿物粉尘在动物体内病理变化，纤维自身变化、残留特性及表面新生成物质形貌特征。

• The results showed that, the surface morphology was changed since nitrogen ions implantation, with the increase of the implanted dosage of nitrogen ions, the surface roughness increased.

  结果表明，氮离子注入对纯铁表面形貌产生了一定的影响，随着注入离子剂量的增加，材料表面的粗糙度也随之增加。

• The worn surface morphology analysis shows that the wear of laser strengthened layers follows the plough trenches way caused by plastic deformation.

  由磨面形貌分析可知强化层是以塑性变形引起的犁沟方式磨损的。

• The characterization methods for the microstructure, including micropore structure, surface morphology and topography of carbon molecular sieves (CMS), were reviewed in this paper.

  综述了国内外表征碳分子筛(CMS)微结构包括微孔结构、表面形态与形貌的主要方法。

• The background of X ray Photoelectron spectroscopy (XPS) spectrum, which was often neglected in the past, may provide valuable information on surface morphology and depth profile.

  光电子谱中的背景信号包含样品的信息，但过去往往被忽略。

• The chemical structure, surface morphology and separation properties for organics of the membrane were analyzed. The membrane was attempted in high temperature wastewater treating experiment.

  分析了膜的表层化学结构、表面形貌及对低分子有机物的分离性能。

• In addition, the surface morphology and crystal structure also affect the films functional groups bioactivity.

  另外，材料的表面形貌、晶体结构等表面性质也会影响其活性化能力。

• Using fractal theory as a theoretical tool, the changes of surface morphology of coal chars of four types of coal during low temperature combustion were studied by nitrogen adsorption.

  以分形几何为理论工具，采用低温氮气吸附法，对四种煤在低温燃烧过程中表面形态变化作了考察。

• The surface morphology and characteristics of the films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and atomic force microscopy (AFM).

  该薄膜的表面形态和特征采用扫描电子显微技术(SEM)，X射线衍射(XRD)以及原子力显微技术(afm)描述。