英语释义

1. a rod or heavy wire that melts and thus supplies metal in fusion welding

片语

welding g rod extrusion press焊条挤压机

welding-rod E core焊条芯

filler rod焊条；焊条芯；熔填条

welding wire rod焊线

welding-rod production line焊条生产线

welding electrode焊条；电焊条；[机] 焊接电极

alloyed welding wire rod合金焊盘条

welding g rod焊条

welding-rod core焊条芯

英汉例句

• using j607rh welding rod made in china, the weld seam metal and the parent material are of iso-strength.

  焊缝金属与母材的强度配合表现为等强匹配，国产j607rh焊条均能与之获得较好的强度匹配。

• to meet the requirement of the welding rod on the power output and dynamic characteristics, combining the the fuzzy control and classic pid control, the fuzzy-pid controller is designed.

  为了满足焊条对电源输出外特性及动特性的要求，结合模糊控制和经典pid控制的特点，设计了模糊自适应pid控制器；

• other alloy powder or mineral may be also added into the welding rod material to raise some performance of the welding rod.

  为了增加焊条的某些性能，还可在其组分中添加其他合金粉或矿物质。

• standard is too weak, welding rod is careful, transporting strip improperly etc. can cause to not weld fully.

  规范太弱，焊条过细，运条不当等会导致未焊满。

• both sealed surfaces of the seat and disc are overlaying welded with fe base stainless steel welding rod so as to improve wear resistance and erosion resistance.

  阀座、阀瓣密封面均由铁基铬镍不锈钢焊条堆焊而成，提高了耐磨性和抗沖蚀性。

• the choice of plan, welding rod and technology of mending the broken tooths of a roller are much discussed.

  着重论述了冷焊修补压榨辊崩齿的方案选定、焊条选择和工艺。

• the carbon content being high, this kind of welding rod is not fit for welding mair conditioninghine parts that have to withstand high stress.

  由于含碳量高，所以这种焊条不宜焊接必须承受高应力的机器部件。

• suitable for acidic, alkalescent, refractory steel welding rod of diameter of 2~6.

  适用于直径2～6的酸性、堿性、耐热钢等多种焊条焊接。

• for those local surface defects on chrome steel and chrome-molybdenum steel, welding rod a402 may be used for repairing, no other treatment is necessary.

  铬钢和铬钼钢表面局部缺陷焊补可采用a402焊条补焊，不需处理。

• this paper has expounded that the solid welding rod protected by co2 gas will eb applied in industry pipe by test, and pointed out the welding technique parameters and operating gists.

  通过试验表明实芯焊丝co2气体保护焊工艺可应用于工业管道全位置焊接施工，同时确定了其焊接工艺参数和操作要点。

• welding length obtained from one welding rod is short.

  一根焊条所得到的焊缝长度有限。

• the welding rod capable of forming pile-up welded graphite-steel metal consists of welding rod core of low-carbon steel and nickel or nickel-base alloy and coating outside the welding rod core.

  本发明公开了一种可通过焊接形成石墨钢堆焊金属的焊条。它由低碳钢、镍或镍基合金制成的焊芯和压涂在焊芯外表面的焊条药皮构成；

• the design of the elements of composite pneumatic welding rod holders and the application of cad for the composite design are presented.

  介绍组合式气动焊钳各元件的设计及其采用cad进行焊钳的组合设计和组合式设计的优点。

• welding industry co. , ltd. wuxi card is based on the production of stainless steel welding rod, welding electrodes, cast iron welding rod mainly three categories of professional production facility.

  无锡王牌焊材工业有限公司是以生产不锈钢焊条、堆焊焊条、铸铁焊条三大类为主的专业生产工厂。

• it points out that reasonable drug composition of welding rod can improve the low temperature properties of low carbon steel weld.

  指出合理的焊条药皮组分可明显提高低碳钢焊缝的低温性能。

• forming process of combustion welding rod was studied and the best parameters of forming process are following: controllability of the burning with the density of the rod 2.

  通过对燃烧型焊条成型过程实验研究，得出最佳成型工艺参数：药粉密度在2。

• the smelting technology of h08a welding rod steel is analyzed, some measures against the problems existing proposed.

  分析了宣钢炼铁厂h08a的冶炼工艺，对其存在的问题提出了改进措施。

• industrial grade sodium alginate, the main reactive dyes for dyeing and printing and paper industry as sizing, welding rod coatings, thickening of cosmetics, detergents and so on.

  工业级海藻酸钠，主要用于印染工业作为活性染料和造纸施胶、电焊条涂层、增稠化妆品、洗涤剂等。

• the smelting parameters and continuous-casting process in developing carbon welding rod steel of h08a are introduced, the cause for success and lost is analyzed, some measures proposed.

  介绍了宣钢试验碳素焊条钢h08a的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。

• the welding rod has good wearing resistance and needn't warm before welding, which may be used to the surfacing of the roller.

  该焊条耐磨性能好，焊前不预热，可用于轧辊的堆焊。

• comprehensive analysis shows that the welding rod material has poor welding performance, if the cooling rate after welding is too rapid, then the welding stress can be too large.

  综合分析表明，拉桿材料焊接性能差，焊后冷却速度过快，以致焊接应力过大。

• the machine is a special equipment for producing welding rod and this machine undertakes the coating procedure among the welding rod production.

  本机是电焊条生产的专用设备，在焊条生产中该机承担涂粉工序。