片语

boiler s drum锅炉汽包

boiler steam drum锅炉汽鼓

steel for boiler drum锅筒用钢

boiler steam drum water level锅炉汽包水位

placing of boiler drum汽包就位

boiler water drum锅炉水鼓

waste heat boiler steam drum余热锅炉汽包

High Pressure Boiler Steam Drum高压锅炉汽包

position of boiler-drum炉筒定位

英汉例句

• with the increasing of unit capacity, higher requirements were proposed to control the circulation boiler drum level.

  随着机组容量的增大，对亚临界锅炉汽包水位控制提出了更高的要求。

• this paper describes the operational principle for 35t/h boiler drum level detection and control, and the circuit which is based on 8098 scp.

  本文介绍了一台以8098单片机为核心的锅炉水位控制仪的检测、控制原理以及控制仪电路和操作情况。

• a monitoring method for boiler drum water level and its features and application are introduced in the paper.

  介绍了锅炉汽包的水位监测方法、系统的特点和应用情况。

• the present invention relates to computer application technology, and is especially method of identifying boiler drum level model.

  一种计算机应用技术领域的锅炉汽包水位模型辨识的方法。

• in the superheat cycle, the saturated dry steam leaving the boiler drum is further heated before entering the turbine.

  在过热的循环过程中，离开锅炉汽包的干饱和蒸汽在进入汽轮机前被进一步加热。

• the model is very suit able for the realization of the on-line objects and can be used for the on-line monitor of the boiler drum life or the quick-cooling devices of boilers.

  这个模型非常适合于在线问题的实现，可以应用于锅炉汽包寿命在线监测系统或锅炉快冷装置中。

• by means of computer, data collection and transition, the system can monitor temperature, pressure and life of boiler drum in total work process.

  该系统利用计算机、智能化数据采集和通信转换对锅炉汽包运行全过程实行温度、压力和寿命的管理。

• this paper focuses on effects of the valve characteristics and the transfer pipe delay on dynamic performance for boiler drum level, under varying valve opening of the feed water control valve.

  本文着重探讨当给水调节伐门开度变化时，伐门特性以及管路传输迟延对锅炉汽包水位动态特性的影响。

• the principle of boiler drum level is analyzed, and the measuring level is divided into the real level and the false level.

  对锅炉汽包水位进行了机理分析，从机理上将通常的测量水位分解为「真实水位」和「虚假水位」两个独立的参数。

• using finite element method, the calculation of the mechanical stress fields of a boiler drum head with a new type of man-hole strengthening structure is carried out;

  本文用有限元法，计算了一种具有新式人孔加强结构的汽包封头的机械应力场。

• according to optimal curve to start-up, boiler drum not only reduces fatigue damage, but also cut down the start-up time.

  按优化曲线启动，不仅保证汽包寿命损耗小，而且能大量缩短锅炉启动时间。

• this paper introduces a control scheme with single loop digital regulator for the boiler drum level control and describes the composition of the system.

  本文介绍了用单回路数字调节器实现锅炉汽包水位控制的方案及系统的组成方法。

• described is a method of superheated steam regulation for the heat recovery boiler of a gas steam combined cycle power plant, the so called boiler drum saturated steam attemperation.

  介绍了燃气—蒸汽联合循环电站余热锅炉过热蒸汽调温的一种方法—自身饱和蒸汽减温。

• the processing capacity of the holes in pipe is about 40% of the processing capacity of the boiler drum and collecting header in boiler fabrication.

  工业锅炉制造中管孔加工量约占锅筒集箱工作量的40%，操作者失误即可能造成该锅筒报废。

• this paper discusses a parameter self-tuning algorithm of the expert adaptive fuzzy controller (eafc) and its application to utility boiler drum water level control.

  本文讨论专家自适应模糊控制器参数的自整定算法，并将其应用于锅炉汽包水位控制系统设计中。

• boiler is an equipment of produce steam, to keep the water level of the boiler drum within a certain range is very important.

  锅炉是生产蒸汽的设备，保持锅炉汽包内的水位在一定范围内是非常重要的。

• this article uses the microscopic analysis method, carries on the thorough discussion to a boiler drum break of accident cause factor, seeks its origin, proposes solution, for boiler safe operation?

  本文采用微观分析方法对一起锅炉鼓包事故原因进行深入的探讨。

• recursive least square method was used to adjust the parameters of the pid controller, which was applied in three-element control system of boiler drum level.

  利用递推最小二乘法循环调整pid参数，并将该控制器应用于锅炉汽包水位三沖量控制系统。

• the paper puts forward the application of soft-sensing in boiler drum water level.

  将软测量技术应用于电厂锅炉汽包水位测量。

• water level of boiler drum in power station is one of the main control parameters for turbine-generator unit, which reflects the balance of boiler load and feed-water indirectly.

  电站锅炉汽包水位间接地反映了锅炉负荷与给水平衡的关系。是电站发电机组运行的主要控制参数之一。