片语

GEAR COUNTER SHAFT CLUSTER中间轴总成

gear wheel shaft齿轮轴

reverse gear shifter shaft反转齿轮变速轴

sun gear axle shaft中心齿轮驱动轴

disengaging gear for shaft轮轴分离装置

slewing gear intermediate shaft逆转横轴

gear shifter shaft变速拨叉轴

gear output shaft齿轮输出轴

PLANETARY GEAR AND SHAFT行星齿轮与轴

英汉例句

• Spinner mainly consisted by cabinet, wedge-shaped sheath, friction wheel, air tube clutch , gear wheel 1, gear wheel 2, gear shaft , motor pinion, air motor and other parts.

  旋扣器主要有箱体、楔形套、摩擦轮、气胎离合器、轴出轴套、大齿轮1、大齿轮2、齿轮轴、马达小齿轮、气马达、继气器、箱体底盖、等组成。

• The cold extruding process is one of the most economical and high efficiency technology for the gear shaft with involute-gear-tooth for transferring torque in automobile.

  对于传递扭矩的渐开线齿形花键轴，采用冷挤压成形加工方法对其齿形部分进行近凈成形加工是高效而经济的。

• This performance can only be handle driving a gear shaft to rotate and rack shaft to move, but not gear shaft drive gear shaft to rotate.

  这种自锁性能只能是手柄带动着齿轮轴的转动及齿条轴的移动，而不能是齿条轴带动着齿轮轴的转动。

• Based on analysis of the machining difficulties of herringbone gear shaft, the same phase machining theory of the gear shaft is presented.

  在详细地分析了该人字齿轮轴加工难点的基础上，提出了齿轮轴实现同相位的加工理论。

• In addition to watch though shock, but strong impact in the outside world is easy to make the pendulum shaft tip or gear shaft broken, can make the vibration of the walking speed needle.

  另外手表虽防震，但在外界的沖击力较强时易使摆轴尖或轮系轴颈折断，亦可使快慢针震动影响走时。

• The precision forging process for the steering sector gear shaft is discussed in the paper. The principle and the path of forming of the hot extruding and upsetting are also discussed.

  介绍了热挤镦加热精整汽车转向机摇臂轴精锻成形工艺，对热挤镦的成形原理及变形过程进行了分析探讨。

• Sealing rings are respectively arranged among the end caps, the outer gear shaft sleeves and the inner gear ring.

  所述端盖与外齿轴套、内齿圈之间分别设置有密封圈。

• A small switching gear, a contrate gear shaft respectively fixedly connected with a big chain wheel and a big gear, a speed change gear set and a generator set are arranged in the casing.

  外壳内，设有小切换齿轮、分别与大链轮和大齿轮固连的端面齿轮轴、变速齿轮组和发电机组。

• The thesis presents a practical die structure with angle pin and gear shaft and rack for secondary combined inclined down loosing core of die casting hopper bodies.

  本文给出了拉钩铸件弯销-斜销二级联合斜向抽芯压铸模实用结构，论述了模具分型面的确定、结构特点和工作原理。

• Fracture tooth of gear shaft in well drilling pump was analysed by chemical analysis, mechanical testing metallographic examination macro and microfractography.

  采用化学成分分析、力学性能测定、金相检验以及断口宏、微观分析等方法，对鉆井泵齿轮轴断齿进行了分析。

• The outer gear shaft sleeves are in splined connection with shafts.

  所述外齿轴套与轴之间为花键连接。

• The thesis presents a practical die structure with Angle pin and gear shaft and rack for secondary combined inclined down loosing core of die casting hopper bodies.

  本文给出了浮子室体铸件斜销-齿轴-齿条二级联合斜下抽芯压铸模实用结构，论述了模具结构特点和工作过程。

• Meanwhile, the handle and the cone of the gear shaft will have increased loads on gear, sleeve and workpiece.

  同时，手柄对齿轮和齿轮轴的锥体对锥套及工件都会产生增力的作用。