英语释义

1. a rotary pump consisting of two meshing gear wheels in a suitable casing whose contrarotation entrains the fluid on one side and discharges it on the other

片语

Gear Wheel Pump[机] 齿轮泵

internal gear rotary pump内齿轮回转泵

gear type pump齿轮式泵

internal gear fuel pump转子燃油泵

turning gear oil pump盘车装置油泵

barring gear oil pump盘车油泵

gear oil pump齿轮油泵

gear wheel pump[机] 齿轮泵

external gear oil pump外齿轮油泵

英汉例句

• at the beginning of operation, to gear pump within the shell filled with liquid to be delivered, for safety launch.

  在开始运转前，往齿轮泵的壳体内灌满待输送的液体，便于安全启动。

• the flow pulsation in a plane-parallel gear pump with 3-idlers was analyzed, formulae for calculating displacement, average flow velocity, instantaneous flow and pulsation flow were derived.

  讨论了具有3个从动轮的平面式并联齿轮泵的结构原理，给出了排量、平均流量、瞬时流量和流量脉动率的计算公式。

• continuous gear pump metering, mixing and dispensing systems with two rotary pumps driven by a common dc-motor drive.

  该产品为连续齿轮泵流量计，由直流电机驱动进行混合和分配操作。

• the gear pump is tested both in the manufactory and in the pet equipment.

  对高参数齿轮泵样机作了运转试验并对其生产现场运行进行了测试。

• use of helical gear in gear pump is an effective measure, which can reduce the mechanical voice and flow pulse.

  齿轮油泵采用斜齿轮是降低机械噪声和减小流量脉动的一种有效措施。

• in this paper the common faults and causing reasons about gear pump of wheel loader are analmd, and the preventive measures are suggested.

  对轮式装载机用齿轮油泵常见故障和产生原因进行了分析，并提出了预防措施。

• the performance of gear pump depends greatly on the correct and optimum parameters selection for pump gear.

  本文认真、全面地分析了泵齿轮参数对齿轮泵性能的影响，确定了泵齿轮参数的最佳选取原则。

• if the first gear pump operation, or long-term idle after use, preferably in small load or no-load circumstances xianpao one hour.

  齿轮泵若是第一次运行，或长期閑置后再使用，最好在空载或小负荷情况下先跑合一小时左右。

• this article counter gear pump and hydraulic cylinder「s appearance」s common breakdown carries on the analysis.

  本文对齿轮泵和液压缸的出现的常见故障进行分析。

• rationally define the work gear pump speed, gear and the axis of rotation to avoid engaging resonance frequency, can prevent noise intensified.

  合理确定齿轮泵的工作转速，使齿轮与轴的转动避开啮合共振频率，可以防止噪声加剧。

• the product is applied to medium, high-pressure gear pump , ram pump , vane pumps, etc.

  产品主要应用于中、高压齿轮油泵、柱塞泵、叶片泵等。

• for high viscosity gear pump need positive &negative, import and export all needs to set up the line safety valve.

  对于需要正反转的高粘度齿轮泵，其进出口管路上均需设置安全阀。

• outer-tooth gear pump is widely used in hydraulic system because of simple structure, low manufacture cost, work reliability etc.

  外啮合齿轮泵以其结构简单、制造成本低、使用时工作可靠等许多优点在液压系统中得到了广泛采用。

• gear pump with the direction of rotation into and out in line with the oil mouth.

  齿轮泵的旋转方向要与进、出油口相符。

• reporters on the arc gear pump industry survey, chengdu wind arc gear pump ding qi, general manager of a limited liability company truthfully said.

  记者在对圆弧齿轮泵行业进行调查时，成都乘风圆弧齿轮泵有限责任公司总经理丁骐如实说道。

• this article will discuss the design of compensating groove in external gear pump by analyzing the gearing characteristics.

  该文主要通过分析齿轮的啮合特点来探讨啮合齿轮泵卸荷槽的设计。

• the construction and principle of the balanced compound gear pump is introduced.

  介绍了平衡式复合齿轮泵结构原理。

• this kind of gear pump return route「s model application is on the engineering machinery chang ke sees walks, the rotation gear, it saves a donkey pump.

  此种齿轮泵回路的典型应用是工程机械上常可见到的行走、转向机构，它节省去一个辅助泵。

• the gear pump seals the selection principle is not high demand, for the occasion, but by experience, not to replace timely selection.

  齿轮泵密封垫的选用原则是，对于要求不高的场合，可凭经验选取，不合适时再更换。

• how to choose the gear pump seals?

  齿轮泵如何选择密封垫？

• the arc gear pump industry downturn, led to our country backward arc gear pump, which is constraining the development of our arc gear pump an important factor.

  整个圆弧齿轮泵行业的不景气，导致了我国圆弧齿轮泵产品的落后，这是制约我国圆弧齿轮泵产品发展的重要因素。

• however, the heavier unbalanced radial force existed in the traditional two-gear」s gear pump is a chief factor to affect the pump's service life.

  但是传统的二齿轮式齿轮泵存在较大的不平衡径向力，成为制约齿轮泵寿命的主要因素。

• high viscosity of the liquid transmission gear pump should be at a lower power consumption, less leakage, larger output under the pressure of the most traffic.

  输送高粘度液体的齿轮泵应做到在较低的功耗、较少的泄漏、较大的压力下输出最多的流量。

• in order to reduce the radial load for hydraulic gear pump, in this paper a high volt composite gear pump of novel structure was introduced.

  为减轻液压齿轮泵的径向载荷，提出了一种新型结构的高压复合齿轮泵。

• pep-ii with a gear pump with the pump to match the specifications of the heating elements for the user matching, which ensures rapid heating and heat control.

  ii齿轮泵带有与泵的规格相匹配的加热元件，可供用户选配，这可保证快速加温和热量控制。