片语

jet pump nozzle assembly喷射泵喷嘴整件

jet spray nozzle射流喷嘴

jet pipe nozzle尾喷管

jet agitator nozzle液力搅拌器喷嘴

spray tip喷嘴；喷嘴梢

jet t nozzle尾喷口

jet-nozzle control system喷管操纵系统

whirl jet spray nozzle漩涡喷嘴

jet nozzle amplifier射流喷嘴放大器

nose piece突鼻组件；喷嘴；换镜旋座；测头管壳

water-jet nozzle喷水喷口

英汉例句

• by theoretical calculation and analysis, the necessary liquid pressure and jet nozzle specification are determined.

  通过理论计算和分析确定所需压力和喷嘴大小。

• the theory method of designing the diameter of jet nozzle and the water pressure are advanced in the light of the endurance limit stress on the dirt.

  提出了根据不同污垢的耐压强度极限应力，设计喷咀直径及射流压力的理论方法。

• this paper puts forward such methods as increasing yarn twist, optimizing sizing technology, reducing whiff pressure, and enlarging the chief jet nozzle and the angle of yarn stop pin, etc.

  针对弹力竹节织物织造过程中的技术难点，提出了增加纱线捻度、合理上浆工艺、减小喷气压力、增大主喷嘴和止纱销的角度等技术措施。

• at the same time, some valuable conclusion for the jet nozzle design have been obtained.

  同时也获得了一些对喷管设计极有用的结论。

• the improved jet nozzle incorporates a coanda effect inducing element to enhance entrainment of particles to be ground within the vortex created by the micronizing jet mill.

  该改进的喷嘴结合了柯恩达效应诱导元件以便增强要在微粉射 流磨机产生的涡流内磨碎的颗粒的夹带能力。

• in this paper, equation for swirl speed of twin water jet nozzle has been analyzed. interdependent relations between swirl speed of twin water jet nozzle and parameters have been studied.

  研究和分析了双喷嘴旋转速度方程，探讨了旋转速度与诸参数间的依存关系，并给出了参数的取值范围。

• recently, with the jet research and development, the non-circle jet nozzle is used widely begin to be accepted because of its advantages.

  但随着研究的不断进展，异形喷嘴因为其在某些方面的突出优势已经开始得到越来越广泛的应用。

• in the presence of the flow deflector, the generating of the vortices and the separating of the shear layer are avoided thereby the energy loss of the jet nozzle is reduced considerably.

  由于喷头中有了导流体，避免了涡流的产生与剪切层的分离，从而大幅度地减少了喷头的能量损失。

• the method of internal combustion with high speed jet nozzle used in the local whole post weld heat treatment of spherical tanks was reviewed.

  对球形储罐焊后整体热处理常用的燃油高速喷嘴内燃法进行回顾，并就开始研制的微机自动控制系统做了简介。

• therefore, the self-resonating cavitating water jet nozzle has prosperous engineering applications.

  自振空化射流喷嘴具有广泛的应用前景。

• the major parameters of slag splashing technology for converters are optimized. proper structure of the jet nozzle of a lance is advantageous to the improvement in the slag splashing technology.

  优化转炉溅渣护炉的主要工艺参数，采用合适的氧枪喷头结构，有利于提高溅渣护炉综合水平。

• the electron density in lateral jet nozzle measured by a 2660a uv laser probe coincides with density results deduced from the spectrum information.

  用2660a紫外激光探针探测侧向喷口处等离子体电子密度，其密度值与用光谱分析获取的一致。

• jet nozzle is arranged at the root of the fairwater.

  喷流孔布置在指挥台围壳的根部。

• the power of the optimum full-size pulsed jet nozzle is 1.5 times that of the ordinary ones of the same size.

  所得最优的全尺寸脉沖喷嘴的功率是同尺寸普通喷嘴的1．5倍。

• effect on bow shock wave due to secondary gas injection was investigated with different mach numbers, gas mass, jet nozzle shape, jet positions and angles.

  研究了气体二次喷射中喷射位置、喷射角度、喷射孔形状、喷射马赫数、喷射流量等诸多参数对混合流场弓形激波的影响；

• the influence of bit cutting teeth and its jet nozzle on the flow field is taken into account in the simulation.

  模拟中考虑了鉆头的切削齿和射流喷嘴对流场的影响。

• finally, selection methods of viscosity index improver through diesel jet nozzle and long time fzg experiments has been suggested.

  提出筛选粘度指数改进剂要经过柴油喷嘴和长时间fzg测试的建议。

• the improved fire fighting water giant consists of stabilizer, self-excited oscillation pulsed jet nozzle and connections.

  改进后的水枪由整流器、自激振蕩脉沖射流喷嘴和过渡接头等组成。

• twist of weft yarns near the jet nozzle was either higher or lower than some weft yarns on the other edge of the fabric.

  喷嘴侧的纬纱捻度可高于废边侧，也可低于废边侧；