during smelting steel and iron, the temperature for molten steel and liquid iron is one of the most important parameter.
在炼钢、炼铁过程中,钢水、铁液温度是其中最重要的参数之一。
secondly, high quality scrap steel is added into a melting furnace in proportion according to the titanium content of liquid iron, and the titanium content of liquid iron is reduced by dilution.
方法之二是根据铁液含钛量的多少向熔炼炉内按比例加入优质废钢,通过稀释的方法来降低铁液的含钛量。
you must keep the liquid iron heated for another half hour.
你必须让铁水继续加热半个小时。
the formulas of quantity of yttrium addition to liquid iron and the relationship for inclusion control are given.
给出了铁液中钇加入量和控制夹杂物形态的公式。
the transfer rate of niobium in liquid iron was measured at 1550℃, 1600℃ and 1650℃ in a molybdenum wire resistance furnace. alumina crucible was used in the experiment.
本实验是在钼丝炉内氧化铝坩埚中测定了1550℃,1600℃和1650℃下铌在铁液中的传输速率。
in this study the contact angle between liquid iron and single crystal magnesium oxide substrate was measured by the sessile drop technique at constant oxygen partial pressure and temperature.
研究利用固定点技术测定一定温度和氧分压下铁液与单晶体氧化镁之间的接触角。
according to variation of slag oxidizability and basicity with time, the routes of slag formation during smelting medium and low phosphorus liquid iron were discussed in detail.
为此从炉渣堿度和炉渣氧化性两个方面讨论了复吹转炉冶炼低磷铁水和磷含量较高的铁水的成渣路线。
surface composites cast iron can be prepared through infiltrating liquid iron into coating based on brushing slurry on eps foamed model in evaporative pattern casting (epc).
采用epc法,在聚苯乙烯(eps)泡沫模型表面涂刷耐磨涂料,浇注后铁水渗入耐磨涂层,得到表层复合材料铸铁。
in this family there were five brothers. they held a discussion and planned to pour liquid iron into the demon's mouth.
那五兄弟商量,这个时候商量到把铁化成水倒到妖魔嘴里面。
during smelting steel and iron, the temperature of molten steel and liquid iron is one of the most important parameters in steel trade.
目前,在炼钢、炼铁的行业中,钢水或铁液的温度是决定炼钢或炼铁的重要参数之一。
the effects of technical factors on melting process of ferrosilicon in liquid iron are studied by using numerical simulation.
用数值模拟方法研究了工艺因素对硅铁在铁液中熔化过程的影响。
by theoretical and practice data analyzing, it is proved that corex process energy consumption for one ton liquid iron is nearly related to excess gas amount produced accordingly.
本文从corex 煤气流向、工艺计算及生产数据分析等方面,讨论了降低corex工序能耗的重点在于降低过剩煤气量。