片语

Copper oxide plane layer铜氧平面层

surface oxide layer表面氧化层

double buried oxide layer双介质埋层

zinc oxide Electrofax layer氧化锌直接式静电复印层

lead-oxide photoconductive layer氧化铅光电导层

oxide passivation layer氧化物钝化层

cerium oxide buffer layer氧化铈缓沖层

thermal oxide layer process热氧化工艺

oxide ceramic layer氧化陶瓷膜

英汉例句

• the excellent biocompatibility of pure titanium and its alloys owes to the oxide layer on their surfaces.

  分析表明：纯钛及其合金具有出色的生物相容性主要归功于表面附着的氧化层；

• silane organo-silane polymers react at room temperature with hydroxides present in the metal oxide layer of cleaned metal substrates to for strong covalent bonds with the metal substrate.

  金属表面经过清洗后，硅烷产品在室温下能与其氧化层中氢氧化物反应，形成很强的共价键。

• the high-voltage capacitor structure comprises a two-step diffusion drain electrode structural layer, an oxide layer and a polycrystalline silicon layer.

  高压电容结构包括双重扩散漏极结构层、氧化层及多晶硅层。

• the germanium oxide layer and the metal oxide layer are converted into a first dielectric layer.

  将半导体氧化层与金属氧化物层转化成一第一介电层。

• following a sacrificial oxide layer formation and removal, sidewall and bottom surfaces of the trenches are oxidized.

  在牺牲氧化物层形成和除去之后，所述沟槽的侧 壁和底表面被氧化。

• first of all, to deal with some spraying petrol, acetone for degreasing treatment with a file, fine sandpaper, oilstone will fatigue layer and oxide layer removed to expose the metal color.

  首先应对喷涂部分用汽油、丙酮进行除油处理，用锉刀、细砂纸、油石将疲劳层和氧化层除掉，使其露出金属本色。

• connected with the machine electrical contact points should be the oxide layer on the surface of polished and clean.

  与机器连接的电接触部位应将表面氧化层打磨干凈。

• manganese content, binding ability of manganese oxide layer on quartz sand and zeolite substrates and stability of mocs and mocz were also investigated.

  分别从静态法方面研究了锰氧化物对铜和铅离子吸附性能，从静态法和动态法方面综合研究了mocs和mocz对铜和铅离子吸附性能。

• as the laser fluence exceeds the threshold a mirror surface appears, otherwise, an oxide layer will be formed.

  在阈值以上激光作用下不锈钢表面形成镜面，而在阈值以下则出现氧化层。

• during wear process oxide layer formed and covered the wear surface, which protected the wear surface and decrease the wear.

  磨损过程中在磨损表面覆盖的氧化物层对涂层起到保护和减磨作用。

• the formation mechanism of oxide layer and the relationship between the oxide and the residual life of high temperature component had been introduced in this paper.

  对高温构件的氧化层形成机理以及内氧化层与炉管剩余寿命的相关关系进行了阐述。

• multilayer staircase type grid structure includes semiconductor base plate in multilayer staircase structure (mss), grid oxide layer setup on mss, and conductive layer setup on the grid oxide layer.

  一种多阶式栅极结构包含具有多层阶梯结构的半导体基板、设置在该多层阶梯结构上的栅氧化层以及设置于该栅氧化层上的导电层。

• the polycrystalline silicon layer is formed on the oxide layer and used for serving as an upper electrode plate of the high-voltage capacitor.

  多晶硅层是形成于氧化层上，用以作为高压电容的上电极板。

• in addition, the structure of oxide layer was analyzed by x-ray diffraction and the mechanism of oxidation is also investigated.

  用x射线衍射分析了氧化层的结构并探讨氧化机理。

• the oxide layer is formed on the two-step diffusion drain electrode structural layer and completely superposed on the two-step diffusion drain electrode structural layer.

  氧化层是形成于双重扩散漏极结构层上，且氧化层完全重叠于双重扩散漏极结 构层上。

• spark-eroded surfaces should be achieved in fine finish mode and oxide layer should be removed.

  放电面应该精加工并去处氧化层。

• through a cmp process, portions of the oxide layer are removed to substantially planarize the trench-filled oxide layer as the first polysilicon layer.

  利用一化学机械研磨制程，移除该氧化 物层的部分区域，以使该填满沟槽的氧化物层与该第一多晶硅层大体上齐平。

• production speed too slow, the bottom again, such as nickel oxide layer in gold slot oxidation (or gold reduction), peel tin.

  产速太慢，底层再次氧化，如镍层在金槽氧化（或金还原），剥锡。

• the hydroxide and oxide layer are amorphous, the water in the oxidation atmosphere is the key factor resulting the increase of the yb film oxidation rate.

  表面氢氧化物和氧化物以非晶态形式存在。 潮湿空气中水分是薄膜靶氧化速率增加的主要原因。

• the basic principle of surface-treating technique for protecting metals from carburization by forming a dense and continuous oxide layer with high stability was introduced.

  阐明了采用表面处理防止金属材料产生渗碳腐蚀的基本思路是在欲防护工件表面形成具有高稳定性的致密、连续的氧化物。

• anodizing is a process of thickening the natural oxide layer that forms on the surface of aluminum.

  阳极氧化是一种浓缩的天然氧化层形成的过程，对铝表面。

• two manufacturing methods are given: powder metallurgy technology and subsurface oxide layer technology.

  简单介绍了制备电触点材料常用的两种方法：粉末冶金法和内氧化法。

• a measurement method for accurately determining the surface composition and the thickness of oxide layer on gaas surface with x-ray photoelectron spectroscopy (xps) was established.

  通过研究取得如下成果：建立了一套用xps準确测量砷化镓表面化学组成、氧化层厚度的测量方法。

• objective:to investigate the effect of porcelain bake cycles on oxide layer formed on cobalt-chromium alloy surface.

  结论：在所有烤瓷程序结束后，应将钴铬合金支架进行彻底打磨、抛光。