英语释义

• of or involving servomechanisms

• control system that converts a small mechanical motion into one requiring much greater power; may include a negative feedback system

片语

servo transducer[自]

AI SERVO人工智能伺服自动对焦

servo valve[自] 伺服阀

servo system[自] 伺服系统，[自] 随动系统

servo integrator伺服积分器

pneumatic servo气动伺服系统；气压随动系统

servo amplifier[电子] 伺服放大器

servo motor伺服马达；伺服电动机

AC servo交流伺服系统

clutch servo离合器分泵；离合伺服器

servo control伺服控制；[自] 随动控制

Japan Servo日本伺服

servo loop[自] 伺服回路

Servo Off伺服关断

servo ventilator伺服呼吸器

英汉例句

• then, the design and improvement of servo tracking system are discussed.

  然后论述伺服控制系统的设计和改进。

• there would be no meaning in design of servo system if there remains a substantial difference between desired and actual movement even though you could achieve within the time you wanted.

  就没有在伺服系统设计的含义，如果仍然有很大的差异和实际需要的运动，即使您的时间内可以达到你想要的。

• the robot has 7-axis arms, each with a servo gripper for small-part handling.

  该款机器人具有7轴手臂，每一个手臂都有一个用于操作细小部件的伺服爪。

• he is now working on novel servo mechanisms, the basic building blocks for robots.

  他现在用的是新型伺服机械装置——机器人的基本组成部分。

• auto-tune support for any servo motor with encoder feedback.

  自动调为任何编码器反馈伺服电机的支持。

• the paper analyzes the operation of electronic gear in the digital ac servo system, introduces the principle of the electronic gear.

  文章分析了数字式交流伺服系统中的电子齿轮环节的作用，介绍了电子齿轮的基本原理。

• a dynamic design method of robust sliding mode controller in ac servo system is proposed in the paper.

  文章提出了一种适用于交流伺服系统的鲁棒滑模控制器的动态设计方法。

• the servo driver has been tested on the machining center, up to the accuracy of micron order.

  该伺服驱动器在加工中心的实际应用中得到了微米级的加工精度。

• the vehicles now feature an all-synchromesh gearbox and more powerful brakes with the long wheelbase 109 inch versions receiving servo assistance.

  这款车现在拥有同步变速箱和更强大的制动系统，加上109英寸长轴距的版本接收伺服援助。

• these optically-generated signals provide higher accuracy and reliability, improving the performance and reliability of the servo system.

  这些光产生的信号提供更高的精度和可靠性，提高性能和伺服系统的可靠性。

• carbon-fibre components include: servo tray, front plate and center diff top plate.

  碳纤维组成部分包括：伺服托盘，接待中心板和顶板差异。

• servo drives are at the core of every piece of automated equipment that plays a key role in achieving higher agility and flexibility in operations.

  伺服驱动是每一台自动设备的核心，为实现运作中更高的机动性和灵活性扮演着关键的角色。

• you can shift the position of the servo motors via two correction inputs, ie. to build up a control loop. this compensates all interference which influences the firing process.

  您可以通过修正两个输入参数改变伺服电机的位置来建立新的循环控制。本功能将对影响燃烧过程的所有因素进行补偿。

• this paper analyzes the sources of effecting the error of the accuracy in electrohydraulic position servo system, and carries out quantitative analysis and calculation to main factors.

  本文从工程实际出发，分析了影响电液位置伺服系统精度误差的来源，并对各主要因素作了定量的分析计算。

• this paper presents the design method of servo system controller applying in image identifying and tracking system.

  介绍了应用于图像识别与跟蹤系统中的伺服系统控制器的设计方法。

• ac servo system in many performance is better than the stepping motor.

  交流伺服系统在许多性能方面都优于步进电机。

• the steering servo is securely held in place with four screws directly on the lower chassis.

  督导伺服是安全的地方举行，在与四个螺丝直接在较低的底盘。

• braking system can be divided into human and braking systems, brake systems and power brake servo systems.

  制动系统可分为人力制动系统、动力制动系统和伺服制动系统等。

• servo drives have two kinds.

  伺服驱动器有两种。

• a kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.

  一种采用脉沖控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。

• servo motor has a long overload ability, have smaller rotary inertia and big plugging around moment.

  伺服电机有较长的过载能力，有较小的转动惯量和大的堵转转矩。

• and that parallel mode requires the servo system to have good speed stability to ensure invariable output of speed.

  平行式要求伺服系统具有良好的速度稳定性，保证恒定的速度输出。

• these developing markets will provide high growth for servo drive equipment which will enable manufacturers to preserve high quality and consistency of their products.

  这些发展中国家的市场将为伺服驱动设备提供高速增长机会，而从使得制造商可以保持高质量和其产品的一致性。

• kits include mounting plate and hardware for mounting to flange or servo mount encoders, making them interchangeable with 5py dc tach generators.

  套件包括安装板安装到安装法兰或伺服编码器和硬件，使之与5py区盛德发电机互换。

• the next part discussed some constraint condition for design torque-rebalance pulse width modulated servo system.

  第二部分讨论设计力矩再平衡脉沖调宽伺服系统中的某些限制条件；