片语

shear resistance index抗剪强度指标

shear resistance bolt抗剪螺栓

shear resistance system抗剪装置

punching-shear resistance沖切抗力

shear r resistance剪切阻力

shear fracture resistance剪切破坏抗力

shear resistance behavior抗剪静力性能

英汉例句

• The results show that the plate strip influences the shear resistance of walls lightly based on a detailed parametric study using nonlinear finite element analysis.

  对墻体进行了参数分析，结果表明：墻体的横向钢带拉条对墻体抗剪承载力影响不大；

• Due to difficulties with quantitative analysis in theory on shear resistance of reinforced concrete composite beam, numerical simulation becomes a direct and efficient approach.

  钢筋混凝土叠合梁的斜截面承载力，从理论上定量分析存在着较多困难，但数值模拟分析是一种直接有效的途径。

• The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS.

  采用ANSYS有限元程序对两边连接钢板剪力墻进行数值模拟分析。

• Thus, when reinforcing the multi-span simply-supported T-beam by this method, enhancing the shear resistance of beam at intermediate support must be conducted yet.

  建议在采用此方法加固多跨简支T梁的同时应对中间支点梁的抗剪能力进行加固。

• The shear resistance of bolted joint can be obviously improved by higher ratio of bolt section to bolted joint area and inclined bolt.

  倾斜锚桿加固的节理抗剪强度比垂直锚桿大，提高锚固面积比能显着提高节理抗剪强度。

• There is not composite enhancing effect to shear resistance of reinforced concrete beams between steel fiber and stirrups.

  钢纤维与箍筋之间在提高钢筋混凝土梁斜截面承载力方面不存在「藕合增强效应」。

• The shear resistance of vertical connection before sudden cracking is diagonal compressive rod mechanism and compression friction mechanism;

  爆裂前，接缝的抗剪机理为斜压桿机制和压力摩擦机制，抗剪承载力随接合筋直径的增大而增大；

• The paper analyzes the sliding range and sliding surface of an old landslide by investigating an old sliding slope. In addition, back analysis is used on shear resistance parameters of slide surface.

  通过对某顺层古滑坡的现场调查，分析判断了古滑坡的滑动范围、滑动面，并对滑动面抗剪强度参数进行了反分析计算。

• The research on the shear resistance of SRSHC columns is carried out.

  研究了钢骨超高强混凝土框架柱的抗剪承载力。

• Furthermore, the contribution of flanges to the shear resistance of the wall was analysed.

  同时还分析了翼缘对墻片的抗剪承载力的贡献。

• Extra high shear resistance and adhesion, can bear great force.

  极高的抗剪切强度和粘接强度，可承受很大的外力。

• The drop number reflects the shear resistance property of liquid bridge between solid particles.

  生球落下强度大小体现了固体颗粒间联接桥抗剪作用的强弱。

• The test results show that the reinforced porous brick wall similar tO normal reinforced brick wall on aseismic design, shear resistance of the bar cannot be used very much when using lap joint...

  试验结果表明，配筋多孔砖墻与配筋普通砖墻具有相近的抗震性能，水平筋采用搭接接头时不能发挥钢筋的抗剪作用以及端部锚固钢筋具有提高承载力和约束砌体作用等。

• Axial compressive ratio is advantageous to seismic behavior of staggered joints. It can improve joints first crashing loads, shear resistance capacity and reduce the sliding displacement of beam bars.

  轴压比对节点的抗震性能有利，它可以提高节点的初裂荷载、抗剪承载力、减小节点中梁筋的粘结滑移量。

• With the FRP strengthening system, performances of masonry structures increase obviously in terms of seismic resistance, shear resistance and flexural capacity out of plane.

  FRP加固砌体结构可以提高砌体结构的抗震、抗剪和平面外抗弯性能；

• Generally, it's no need to design fixture for concrete filled steel tubular columns in shear resistance expressly.

  一般情况下，不需要专门为钢管混凝土柱进行抗剪配筋设计。

• It is pointed out that punching shear of plate and shear of oneway plate are two special cases of shear resistance of plates.

  本文指出双向平板的沖切问题与单向板的抗剪问题是平板抗剪问题的特殊情况。

• Based on the experiments, the effect factors of the shear resistance and hysteretic behavior of compound bearing walls are analyzed.

  并以试验为基础，对复合承载墻体的抗剪承载力的影响因素和滞回性能进行了分析。