片语

Static and stiffness静力与静刚度

static stiffness test静态强度试验

static stiffness analysis静刚度分析

static Torsioral stiffness刚性

static axial stiffness静态轴向刚度

static angular stiffness静态角刚度

static creep stiffness module静态蠕变劲度模量

static radial stiffness径向静刚度

英汉例句

• static stiffness analysis of a kind of earthquake simulator with redundant inputs;

  地震模拟器系统是地震工程研究工作中的重要试验设备之一。

• the method provides the theory foundation of a pkm「s static stiffness and its design method.

  为并联机床静刚度研究及其设计提供了理论依据和方法支持。

• by studying the influence of some of the main components, the influence factors of the modal and static stiffness in the body structure design are found.

  通过研究主要零部件对结构扭转刚度及低阶模态的影响，明确了车身结构设计中的主要影响因素。 为轻型客车车身设计提供了参考依据。

• in this paper the formulas using dimensionless method for the calculation of the static stiffness of machine tool spindles with two or three supports are presented.

  本文用无量纲形式表达机床二支承和三支承主轴部件静刚度的计算公式。

• built the static mathematical models for the hydraulic circuit mentioned above. analysis the characteristics of speed-load, speed characteristics and the static stiffness for the circuits.

  建立了陶瓷压砖机上述各动作液压回路的静态数学模型，完成了各回路速度-负载特性、速度特性及速度刚度等静态特性分析；

• this paper described the concept of static stiffness of a process system of a machine tool.

  介绍了机床工艺系统静刚度的概念。

• because of the adoption of fem, the proposed method to calculate the static stiffness of groundsill is suited and accurate more than the approximate method.

  由于有限元方法的应用，使得本文所提出的计算地基的静刚度的方法比近似计算方法的适用范围要广，同时也要精确一些。

• it presented the whole design method of the static stiffness testing system. the main software and hardware of the system were illustrated and developed.

  提出了静刚度测试系统的总体设计方案，并对该系统主要软件和硬件部分进行了说明与开发。

• the static stiffness and hysteresis can be calculated.

  从所得的数据算出静弹簧指数和迟滞幅度。

• fem is used to establish the model of static stiffness of the whole machine and the static stiffness distribution of the moving platform in the generalized workspace is obtained.

  建立了整机静刚度的有限元模型，得到动平台在广义工作空间下的刚度分布规律；

• in this paper, by using the method of matrix structural analysis, the static stiffness model are derived from researching bkx-i varied-axis nc machine tool.

  文章以bkx-i型变轴数控机床为研究对象，利用矩阵结构分析法建立了变轴数控机床的静刚度计算模型。

• it」s difficult to improve the precision of the spindle static stiffness test.

  如何提高测试精度是主轴静刚度测试中的难点。

• to obtain the static stiffness of a pkm, the statics of a pkm is researched first and then the energy method is introduced.

  本文在研究并联机床静力学的基础上，使用能量法分析在外载荷作用下的并联机床变形量，从而获得在不同位姿下并联机床的静刚度。

• in the static analysis, study mainly focused on the static stiffness and in obtaining the static stiffness distribution of the whole work piece table.

  在静态特性中着重分析了微进给平台的静态刚度，得出整个动平台的工作平面上的刚度分布图。

• the static stiffness theory of a parallel kinematic machine (pkm) is still in progress.

  常见的并联机床静刚度分析理论发展尚未完善。

• the results show that after modification, the vertical static stiffness is reduced by 7.5% compared with the original mount;

  结果表明，改进后发动机悬置垂向静刚度比原悬置降低了7.5%；

• it includes reliability design of wear resistance, stability, static stiffness and strength.

  它包括耐磨性、稳定性、刚度、强度的可靠性设计。

• on-line automatic testing of bearing static stiffness can be achieved by the new method and testing accuracy and efficiency is increased.

  新的测试方法，能够实现轴承静态刚度的在线自动测试，提高静刚度的测试精度和效率；

• the experiment results show that the initial requirements for the control performance is satisfied because of the good controlling accuracy and static stiffness of the magnetic bearings.

  试验结论表示：磁悬浮轴承具有良好白勺控制精度及静态刚度，满足了磁悬浮轴承控制性能白勺初步要求。

• the white car body structure of the static stiffness of the field of computing has been valued by domestic and foreign automobiles industry.

  国内外各大汽车公司对轿车白车身的结构静态刚度分析计算一直非常重视。

• thirdly, the design model and design method of dmf are verified by torsional vibration experiments under idling condition and static stiffness experiment.

  第三，利用双质量飞轮怠速实验与静刚度实验验证双质量飞轮设计模型与设计理论的正确性。

• the first order critical speed and static stiffness of the spindle increases greatly after optimization.

  经优选设计后，电主轴的一阶临界转速和主轴端静刚度均有较大幅度的提高。

• results of the experiment show that hydrostatic gas-lubricated bearing with self controlled cone slot restrictor possesses of very high static stiffness and satisfactory stability in certain range.

  经试验，安装该节流器的推力轴承在一定载荷范围内静态刚度接近无穷大，而且无气膜不稳定现象发生。