片语

strain strength distribution应变强度分布

elastic strain distribution弹性应变分布

strain rate distribution应变率分布

strain field distribution应变场分布

strain and stress distribution应力应变分布

equal strain distribution principle等应变分配原理

strain stress distribution应变分配

stress and strain distribution应力应变分布

strain loading distribution应变载荷分布

英汉例句

• A general life model adapted to both stress fatigue and strain fatigue is deduced, through analyzing the influence function of strain distribution on life.

  本文通过应变分布对寿命的影响函数分析，导出了一种适用于应力疲劳和应变疲劳的通用寿命模型。

• Test results demonstrated that digital image correlation method was effective, which could precisely measure the displacement and strain distribution in concrete under fatigue loading.

  试验结果表明，数字图像相关方法具有可行性，能够有效地测量混凝土在疲劳荷载作用下的位移和应变。

• A hybrid grid method was used to determine the principal plastic strain distribution in a deformed area of a sheet metal piece.

  为进一步研究大型覆盖件沖压成形质量分析的技术，采用混合网格法进行变形区域塑性主应变分布测量。

• The feature of strain distribution in a typical deep drawn part JD90 motorcycle tank was analyzed.

  分析了典型实物拉深零件JD90型摩托车油箱的应变分布特点；

• The deformed 3-d Moire fringe patterns are analyzed, and the deformed strain distribution patterns are obtained.

  对变形三维云纹图进行了分析，得出了三维应变分布图。

• It shows common features of regional vertical deformation anomaly area and high strain distribution area of horizontal deformation.

  区域性垂直形变异常区与水平形变的高应变分布区共生的特征。

• Regional strain distribution pictures, strain patterns, may be determined by systematically measuring the finite strains in rock at the various spots in the relevant regions.

  对一定区域内不同部位的巖石有限应变进行系统的测量就可以得到这个区域内的应变分布图象—应变型式。

• The stress and strain distribution and evolution during pore deformation are analyzed and various factors influencing the pore closure and welding are examined.

  基于数值模拟结果 ，分析了影响空洞闭合的主要因素及其影响规律 ，构造了考虑各种影响因素在内的锻合压下率计算公式。

• Numerical and experimental methods were employed to investigate the effect of the spot pitch on the stress and strain distribution and the joint strength.

  采用数值分析和试验研究方法考察了焊点间距对两种胶焊中应力应变分布和接头强度的影响。

• The principle of Brillouin optical time domain reflectometer (BOTDR) is introduced and its application to the strain monitoring of the strain distribution of the reinforced concrete beam is studied.

  介绍了布里渊光时域反射计(BOTDR)的分布式光纤应变测量原理，并应用BOTDR技术对钢筋混凝土T型梁加载后的应变分布进行了测量。

• Objective To investigate the strain distribution along the middle line on base plate of maxillary complete denture under balanced and unbalanced occlusion.

  目的观察上颌总义齿基托中线区在咬合平衡及非平衡时的应变变化规律。

• For both types of test set-up, the cyclic bond stress-slip relations, and cyclic strain distribution profiles for the bonded FRP-to-concrete joints are presented and discussed.

  对于这两种类型的测试设置，循环粘结应力滑移关系，循环应变保税玻璃钢到混凝土接缝和分布状况，提出讨论。

• Results show that the more discrete loading points, the higher uniformity of the strain distribution and the better forming quality;

  结果表明，离散加载点数越多，应变分布越均匀，成形质量越好；

• The strain distribution based on small and large deflection theories of diamond square diaphragm was studied using theories of plate bend.

  采用薄板弯曲理论研究了均匀载荷作用下多晶金刚石方膜在小挠度和大挠度下的应变分布情况。

• Together with the experimental results, the effect of strain distribution to the structure and quality of the forging products has been discussed.

  结合模拟实验讨论了变形分布对锻材组织及质量的影响。

• Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.

  建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。

• Before the failure of bamboo beams, cross-section strain distribution along the height was linear, and the plane-section assumption was established.

  竹梁在破坏前，横截面应变沿高度方向的分布基本上呈线性，平截面假定是成立的。

• The results show that the stress and strain distribution around the cold worked hole are similar between the model and real object.

  结果表明：带衬套挤压和不带衬套冷挤压时孔边载荷的分布，模型材料与原型实际挤压结果相似；

• Objective To study the strain distribution along midline of maxillary complete denture base under the condition of balanced and unbalanced occlusion.

  目的在平衡牙合及非平衡牙合状态下，对上颌总义齿沿基托中线应变分布进行比较研究。

• The measurement of tensile strain distribution of optical fiber is very necessary to guarantee the long-term reliability of optical cable.

  通信光缆拉伸应变分布测量对于保证光纤通信线路的长期可靠性具有十分重要的意义。

• Objective: Toanalyze the strain distribution of bone around the implant?s cervical and apical area on vertical loads with linear strain gauges.

  目的：在模型上比较在不同部位施加不同大小的垂直负荷对种植体周围骨的应力分布的影响。

• Discuss the gas flow characteristics, temperature distribution and plastic strain distribution of this catalytic converter part.

  论述了该型催化转换器的气体流动特性、温度分布和塑性应变分布。

• BACKGROUND: It is currently urgent to design biomechanical principles-based bone plate according to stress and strain distribution after plate fixation.

  背景：研究接骨板固定后的应力、应变分布规律，设计符合生物力学原理的接骨板是当前急待解决的课题。

• Simulation results show strain distribution of workpiece and how outer diameter, thickness, axial elongation of some typical nodes change with time.

  分析了毛坯的应变场分布，典型节点外径、壁厚、轴向伸长量随时间的变化曲线，对整个成形工艺及变形机制有较好的动态认识。