片语

ball-milling efficiency球磨效率

Tabletop Ball-Milling桌上型球磨机

mechanical ball-milling机械球磨

ball-milling modification球磨改性

reactive ball-milling反应球磨

wet ball-milling球磨湿混

ball-milling powders球磨粉

ball head milling cutter球头立铣刀

英汉例句

• The sequence of the factors was determined by orthogonal experiments: ball gradation, milling rotational speed, ball milling time, and ratio of ball to powder.

  正交试验表明四个因素的主次顺序为：磨球级配、球磨机转速、球磨时间、球料比。

• XRD analysis revealed that MgO was not formed during ball milling of the magnesium alloy powder under the protection of ethanol.

  将镁合金切屑在无水乙醇的保护下进行球磨，XRD分析显示镁合金粉末经过球磨没有被氧化。

• The main influence factors of preparing molybdenum copper nano-powder by high-energy ball milling were studied; the morphology and size of powders were analyzed.

  研究高能球磨法制备纳米钼铜复合粉末的主要影响因素，通过扫描电镜和透射电镜分析粉末的形貌及颗粒尺寸。

• Cycling life tests investigated that the capacity of alloy prepared by ball milling decreased to 40% after 50 cycles, while the solid-state diffusion method just 25 cycles.

  循环寿命测试，球磨的样品经过50次循环其容量衰减到40%，非球磨样品经25次的循环即衰减到同样程度。

• The evolution of structure of the powder during ball milling was studied by XRD and SEM and microhardness of the powders milled for different time was measured.

  利用X射线衍射仪、扫描电镜研究了球磨过程粉末的显微组织结构，测量不同球磨时间粉末的显微硬度。

• This suggests that increasing the ball milling rotation speed can promote the alloying efficiency and decrease the consumption of time.

  这说明增大球磨转速可以提高球磨效率，缩短耗时。

• The results indicate that high energy ball milling together with low temperature quick hot extrusion is the most effective method for obtaining homogenous distribution of reinforcers.

  采用高能球磨法混料和低温快速热挤压工艺相结合，是实现增强体颗粒均匀分布的最有效方法。

• Barmac grains and ball milling grains are brown corundum grains from different granulating process.

  巴马克砂与球磨砂是制粒工艺不同的棕刚玉砂。

• Mixture through the ball milling method to make it uniform dispersion.

  通过球磨混料法来解决各相的分散性问题。

• My company is in accordance with GB8649 standard production of hot-rolled steel ball milling enterprises.

  我公司是按gb8649标準生产热轧球磨钢球的企业。

• In order to improve working environment of hard alloy for mine, replacement of sand blasting by ball milling handling technology is put forward.

  对矿用硬质合金的热处理和时效处理，通常采用喷砂工艺，为改善劳动环境，提出球磨处理技术取代喷砂，取得了明显的技术经济效。

• Spheroidal graphite cast iron and graphite are chosen as raw material separately, ball milling method is used to fabricate carbon microspheres.

  分别以球墨铸铁和石墨为原料，采用机械球磨法成功制备了碳微球。

• The phosphogypsum can be calcined into quality building plaster via neutralized with lime, ball milled or water washed, ball milling pretreated.

  磷石膏经石灰中和、球磨或水洗、球磨预处理，可煅烧成优等品建筑石膏。

• Properties and morphology of thermites mixed up by twin-screw and ball milling procedures are investigated with different mixing time.

  采用双螺旋和球磨两种混料方式，研究不同混料时间对（铝）热剂性能及颗粒微现形态的影响。

• The system which is applied to grader the Zirconium dioxide superfines after ball milling is introduced, specially the features of the centrifugal grader.

  介绍氧化锆球磨机风选分级收集系统，特别是系统中离心式超细分级机的特点。

• Methods of leuco-oxidizing, solvent treating, ball milling and acid treating are used for pigmentation of Vat Blue RS .

  还原蓝RS颜料化主要采用了隐色体氧化法、溶剂处理法、球磨法和酸处理法。

• The influence of ball milling time on hydrogen storage performance was also investigated.

  研究了材料的组成和球磨时间对吸放氢性能的影响。

• The preparation process of KBF_4 nano powders by high energy ball milling and their :influencing factors have been studied.

  探讨了高能球磨法制备纳米KBF_4粉末的工艺过程及影响因素。

• The effects of polyethene glycol 20000 and sodium dodecyl sulfate on the dispersion of magnesium zinc ferrite slurry prepared by ball milling dispersion were studied.

  选用聚乙二醇20000和十二烷基硫酸钠两种分散剂，通过球磨分散法制备镁锌铁氧体浆料。

• It suggests that the increase of charge ratio causes the change of the milling balls' movement trail and collision efficiency, thereby reduces the ball milling efficiency.

  这说明球料比的增加会因为改变磨球在球磨罐中的运动轨迹、有效碰撞而影响球磨效率。

• The methods of thermal spray and mechanical ball milling are combined in this paper and a new method of preparation of Cu-Zn ultrafine powders is brought forward.

  本文将热喷涂法与机械球磨法相结合，提出一种新的超细铜锌粉末的制备方法。