英汉例句

• the bending angle of a joint is related to its inner air pressure.

  关节弯曲角度与关节内的气体压强有关；

• the displacement of bulge forming, bending angle and residual stress of bt20 alloy cylindrical workpiece change insignificantly at 750~850℃.

  当温度在750~850℃之间时，bt20合金筒形件胀形量、弯曲角度和残余应力变化幅度较小。

• the reason why prism dispersion spectral line is bent is explained in this paper, together with detailed calculation of spectral line's bending angle deviation.

  分析了棱镜色散谱线几何弯曲的原因，并对谱线弯曲的角偏离量进行了详细的计算。

• the measurement of real-time bending angle and temperature during the laser bending process of shipbuilding steel plate is carried out.

  实验中实时测量了船舶钢板激光弯曲成形过程钢板弯曲角度和温度的变化。

• special incline is not usually main function plane of pressing, its external shape size and bending angle are not dimensioned directly in 2d part drawing; the data needs calculating.

  特殊斜面在沖压件中通常不是主要功用面，在二维零件图中，一般不会直接标注特殊斜面的外形尺寸及其弯曲角度，需要自行设法计算得到数据。

• under the constant bending times, the biggest bending angle can be obtained with an optimal accumulative line energy value.

  在扫描次数一定的情况下，存在一个最优的累积线能量使弯曲角达到最大；

• relationship between the bending angle and geometry of sheets and technological parameters is discussed.

  论证了板料的几何参数和工艺参数与变形的相互关系。

• the ann model between the bending angle and technological parameters is built by using the technology and sample data which has been acquired.

  应用神经网络技术，并利用已经获取的加工样本数据，建立起工艺参数与折弯角之间的人工神经网络模型。

• with the bending angle increasing, the tangential, normal and hoop strain increase, but the increasing amplitude of hoop strain is smaller than the others.

  随着弯曲角度的增大，弯管三向应变均增大，但周向应变增幅小于切向应变与厚向应变的增幅；

• the energy density of the laser spot has a strong influence on the bending angle and the microstructure and properties of sheet metals.

  光斑的能量密度的大小对弯曲角度和材料的组织性能影响很大。

• a simple focusing technology is proposed. the influences of laser power, scan times, scan rate, distance of focusing on bending angle are analyzed respectively.

  通过实验研究了激光能量因素、扫描速度因素、激光光斑大小和扫描次数等因素对弯曲成形角度的影响。

• the reasons that the bending angle decrease with the number of irradiation are analyzed by using the built model.

  用建立的模型分析了多次扫描过程中随扫描次数增加弯曲增量逐渐减小的原因。

• researched friction loss and ultimate strength of external prestressing tendon considering deviator curvature radius and bending angle of prestressing tendon.

  研究了转向块曲率半径、钢绞线弯折角度等对预应力摩擦损失和体外预应力筋极限强度的影响；

• the bending angle increases with an increase of the energy density.

  增加能量密度，板料的弯曲角度显着增大。

• changes in the bending angle with processing parameters have been studied for the laser bending of metal sheets. these parameters include laser power, path feed-rate and feed numbers.

  金属板料在激光作用下发生弯曲变形，其弯曲角度与激光功率、激光扫描速度以及扫描次数有关。

• the influence of temperature on displacement of bulge forming, bending angle and residual stress of bt20 alloy cylindrical workpiece is analyzed.

  计算了不同加热温度对bt20合金筒形件胀形量、弯曲角度和残余应力的影响。

• based on the basic theory of artificial neural network , bp network model is founded to predict the highest surface temperature and bending angle in the process of laser sheet metal bending.

  基于人工神经网络基本理论，建立在板料激光弯曲中预测材料表面最高温度、弯曲角度的bp网络模型。

• fourth, real time bending angle estimation by singular ground-based gnss station is studied.

  第四、研究了单站地基gnss实时估计弯曲角。

• the machine is specially designed for duct engineering. it is light weight, and is easy to move. the bending angle of products is small.

  本机械是专为通风管道工程设计机械，具有重量轻，移动方便，压角角度小等优点。