英语释义

• gears that mesh at an angle

片语

bevel tooth gear system斜齿轮系统

bevel planet gear行星锥齿轮

bevel t gear jack伞齿轮千斤顶

straight bevel spur gear直齿轮

bevel l gear jack伞齿轮千斤顶

bevel l gear tester伞齿轮检测仪

bevel planetary gear automatictransmission行星锥齿轮自动变速器

bevel l gear hobber锥齿滚齿机

英汉例句

• with the increasing requirement of people to the more comfortable automobiles, it is important to reduce the vibration and noise of the bevel gear to improve their transmission quality.

  在人们对于车辆乘坐舒适性提出更高要求的背景下，减振降噪，提高产品的质量就成为当前锥齿轮行业的重要课题。

• to order rotary manual or bevel gear actuators on valves with the 304 stainless steel yoke, replace the 「cs」 code from the sizing table with the code 「s1」.

  如果要订购304不锈钢轭架阀门的旋转手轮或锥齿轮执行器，则要把选型表代码中「cs」更改为「s1」。

• this paper describes the causes, appearance and remedy of fractured fastening bolts in driven bevel gear of tatra model t815 truck rear axle.

  介绍了太脱拉t815型汽车后桥从动圆锥齿轮联接螺栓发生断裂的原因、现象和解决方法。

• by this emulation method, the driving error and aptness of loxodrome normal circular-arc bevel gear on the condition of errors can be analysed effectively.

  本论文提出的仿真方法能够对斜航式法向圆弧锥齿轮副误差条件下的传动误差和接触区域进行有效的分析，并且方法简单高效。

• when gears are to be used to transmit motion between intersecting shaft, some of bevel gear is required.

  当齿轮是用来传递运动之间的交叉轴，其中有些圆锥齿轮的需要。

• the inferential reasoning based on the mathematical model of straight bevel gear mating surface in project application.

  推导基于工程应用的直齿圆锥齿轮啮合面的数学模型。

• all valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.

  所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。

• this thesis extended the external cylinder bevel gear transmission into the case of internal cylinder bevel gear transmission, and apprited it into the offset planetary drive of bevel gears.

  本文将圆柱圆锥齿轮传动推广到内圆柱圆锥齿轮传动中，并应用于锥差式减速器中作周向限制副。

• the parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

  给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。

• when ordering bevel gear actuators, specify mounting position as second line information.

  如果是订购锥齿轮执行器，请在第二行增加安装位置信息。

• it presents the technique for machining the tooth of spiral bevel gear in precise forging die, describes the principal of calculating the die parameters from the spiral bevel gears.

  阐述了采用刀倾法成形切削加工精锻弧齿锥齿轮模具齿形的方法和由齿轮参数反算模具齿形参数的原理。

• marc, plot the spiral bevel gear into griddings in manual mode.

  通过人工方式，对螺旋锥齿轮进行网格划分。

• assisted with bevel gear , it's easy to open and close. this kind of valve is mainly used in modern industry field.

  与伞齿轮辅助配合，达到很轻便的启闭效果，此阀主要用于现代工业领域上。

• bilayer gears, crown gears, bevel gear , wheel , helical, worm, safety clutch teeth, small modulus gear and steering gear copper server.

  双层齿轮、皇冠齿轮、伞齿轮、滚轮、斜齿、蜗桿、安全离合齿、小模数铜齿及舵机伺服器等。

• deviation measurement of tooth thickness and conical point of straight bevel gear by using steel bail was studied and approached.

  对钢球法测量直齿圆锥齿轮齿厚及锥项位置误差检测进行了研究和探讨。

• the drive advantages and technologic advantages of plastic bevel gear were analyzed.

  分析了塑料斜齿轮的传动优点和工艺特点。

• bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use a standard handwheel or chainwheel.

  锥齿轮执行器为手轮或链轮提供垂直安装方式，也能够应用在由于空间限制而无法采用标準配置的手轮或链轮执行器的地方。

• bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use of a standard handwheel or chainwheel.

  锥齿轮执行器提供手轮或链轮的垂直安装方式，或者用于由于空间限制无法使用标準手轮或链轮的应用环境。

• spur gear (sga) or compound bevel gear (bga) attachments can be provided in any position shown in figure 1.

  如果采用正齿轮（sga）或复合伞齿轮（bga）附件，则可以在图1中显示的各个位置安装手轮。