英语释义

1. brooch
wore a lovely broach on her lapel

2. any of various pointed or tapered tools, implements, or parts: such as

3. a spit for roasting meat

4. a tool for tapping casks

5. a cutting tool for removing material from metal or plastic to shape an outside surface or a hole

6. to pierce (something, such as a cask) in order to draw the contents also to open for the first time

7. to open up or break into (a mine, stores, etc.)

8. to shape or enlarge (a hole) with a broach (see broach entry 1 sense 2c)

9. to make known for the first time

10. to open up (a subject) for discussion
a good time to broach the subject

11. to break the surface from below
the whale broached

12. to veer or yaw dangerously so as to lie broadside to the waves —often used with to
Our ship broached to.

13. to bring up as a subject for discussion
She broached an idea.

14. a fine tapered flexible instrument used in dentistry to remove dental pulp and to dress a root canal

15. to open (a vein) to draw blood

片语

generating broaching渐成式拉削

broaching press拉槽压力机

broaching machine[机] 拉床；剥孔机，铰孔机

burnish broaching精拉削

progressive broaching分层拉削

keyway broaching[机] 键槽拉刀

Pot Broaching圆柱齿轮外齿拉削法

finish broaching[机]

Broaching holders拉刀样式

英汉例句

• After turning, milling, and broaching and other machining method of processing, then through the whole heat treatment.

  经过车削，铣削，和拉削等机加工方法加工而成，再经过整体热处理。

• Studied the mechanism of work hardening by broaching new engine superalloy GH761, which is important to GH761 application and discussion the reason of cutting tool wear.

  研究新型高温合金GH 761拉削时产生加工硬化的现象和变化规律，这对研究GH761合金的实际应用和探讨拉刀磨损原因是非常必要的。

• Take extreme care, and use diplomacy when broaching the subject, he advises.

  Stern建议，当处理这个话题时，要非常非常小心，而且要用点外交手腕。

• A new simple method for broaching spline holes with a common machine, which has enlarged Screwpitch, is introduced.

  介绍了一种在有增大螺距的普通车床上拉削花键孔的新方法。

• During the turning and broaching operation of titanium alloys, experiments and researches of cutting temperatures are of great significance.

  在钛合金车削和拉削加工过程中，对切削温度进行试验研究有着十分重要的意义。

• These machines are designed for broaching holes of various geometrical forms in mass and batch production with high efficiency.

  本系列机床用于拉削各种几何形状的孔，生产效率高，适于大量生产和成批生产。

• After being positioned and locked by the worktable, the work-piece will enter the broaching state.

  经过工作台定位、锁紧，工件进入拉削状态。

• In one side of the slide carriage, there is limit cam, response to the limit switch, to realize the broaching and returning function of the machine tool.

  在溜板一侧装有限位碰铁，与限位开关感应，实现机床的拉削与返回功能。

• L Suitable for all machining operations, even the most difficult and demanding broaching machining.

  适用于所有加工方式，就算是最困难和最苛刻的拉削操作。

• The research shows that residual stress in the direction of broaching rate are tensile at the surface . The maximum residual stress is beneath the surface.

  试验结果表明，沿拉削速度方向的表面残余应力为拉应力，最大残余应力在表面层下。

• A simple jig and Fixture used in American small machine repair shops for broaching operation on various lathes.

  介绍了一种美国小型机械修配厂在各种车床上进行拉削加工用的简易工装。

• This paper introduces the technology of broaching accurate, small deep hole and the design of broaching tool as well as its parameter「s selection.

  介绍用拉削加工精密小深孔的工艺方法及拉刀的设计、参数的选择。

• It will be widely use to broaching the high quality PCB board and other accurate mechanical broaching, and so on.

  种高质量pcb的鉆孔和各种机械部件的精确鉆孔等其它精确鉆孔的应用。

• They managed to keep the boat from broaching to in the heavy seas.

  他们设法使船在波涛汹涌的海面上不突然横转。

• The weak links of the bed are found by the analysis and a proposal for improving the structural design of broaching machines was presented.

  从计算结果分析了该机床支承件薄弱环节，并对卧式拉床结构提出了设计改进的建议。

• Suitable for all machining operations, even the most difficult and demanding broaching machining.

  适用于所有加工方式，就算是最困难和最苛刻的拉削操作。

• It was not till the evening, after family prayers, that Angel found opportunity of broaching to his father one or two subjects near his heart.

  一直到当天晚上家庭祈祷以后，安琪尔才找到机会把一两件心思对他的父亲说了。

• Next update I」ll show how to build the upper and lower collet assemblies. The topic to keep in mind is「 broaching 」. Stay tuned!

  下次更新我将展示如何构建上下夹头集会。专题要记住是「拉」。敬请关注！

• Its main products include such six kinds of products as gear cutter, broaching cutter, hole drilling cutter, milling cutter, threading cutter and etc.

  主要产品有齿轮刀具、拉削刀具、孔加工刀具、铣削刀具、螺纹刀具等六大类产品。

• Which has been calculated broaching, and must be less than the actual pull broaching machine.

  其中计算所得到的拉削力，必须小于拉床的实际拉力。

相似词

break间断；休息；短假；缺口；破裂；进攻；骨折；结束；机会；（斯诺克）一次连续得分；蓓蕾

surface(Surface)人名；(英)瑟菲斯