片语

bioclimate buffer layer生物气候缓沖层

ti buffer layerti中间缓沖层

cushion coat缓沖层

intermediate buffer management layer中间缓存管理层

buffer carbon layer碳缓沖层

ni buffer layerni过渡层

MoO3 buffer layerMoO3缓沖层

InAlGaAs buffer layerInAlGaAs缓沖层

英汉例句

• The filter comprises a filter meshwork with continuous through holes, a pyrolysis buffer layer is stuck on the upper surface of the filter meshwork.

  过滤器包括带有连续通孔的过滤网，在过滤网的上表面粘接有高温分解的缓沖层。

• In addition, the buffer layer addresses and mitigates lattice mismatches between the film relative to which the transistor is formed and the silicon substrate.

  此外，缓沖层地址和缓解晶格薄膜之间的不匹配而相对形成晶体管和硅衬底上。

• The office building is firstly blasted in order to create a space and buffer layer for water tower collapse.

  首先爆破办公楼，为水塔倒塌创造空间和缓沖垫层。

• Simulation results show that the total amount of impurity in the buffer layer or transparent an - ode is the key to determine the on-state voltage drop of GCT device.

  模拟结果表明，缓沖层与透明阳极各自区域中的杂质总量是决定GCT的通态压降的关键因素。

• In addition, the buffer layer can mitigate parallel conduction issues between transistor devices and the silicon substrate.

  此外，缓沖层可以减少晶体管之间的设备和硅衬底平行的传导问题。

• On the basis of this calculation, the impact of the SiO2 buffer layer thickness on the characteristic impedance and dielectric constant in the modulator with a ridge structure is obtained.

  在此基础上得出了脊波导结构调制器中缓沖层厚度对特征阻抗和有效介电常数的影响特性。

• In order to reduce the expansion stress resulting from cement's expansion and prolong the life-span of porcelain insulator, a thin asphalt buffer layer is coated between the porcelain and the cement.

  为了降低水泥膨胀所引起的膨胀应力，延长瓷绝缘子的使用寿命，在胶装时一般在瓷体和水泥之间涂一层沥青缓沖层。

• Pressure brazing was employed to increase the joint strength by the plastic deformation of the buffer layer and the decrease of the residual stresses.

  利用压力钎焊促进缓沖层产生塑性变形，降低了接头的残余应力，提高了接头强度。

• This amorphous layer can serve as the buffer layer of the subsequent growth of the top SBN60 films and result in the high orientation of it.

  总结起来就是非晶层成分的变化以及结构的缓沖导致SBN薄膜能以最低的能量生长。

• The resistance transformation type memorizer with a buffer layer structure has simple manufacturing process and low manufacturing cost, and is compatible to the traditional CMOS process.

  本发明提供的具有缓沖层结构的电阻转变型存储器制造工艺简单、制作成本低并且与传统CMOS工艺兼容。

• The middle class is a buffer layer in the structure of social interests.

  中间阶层是社会利益结构中的缓沖层。

• Furthermore, the effect of solder ball layout and stress relax buffer layer material on the fatigue life of solder joints is studied.

  最后探测锡球配置方式和缓沖层材料性质对于锡球疲劳寿命的影响，以获得高可靠度的封装结构。

• Finally, an idea of designing gradual materials as buffer layer between metal and ceramics was suggested.

  最后作者提出了设计梯度材料作为专用缓沖层材料的设想。